Dr. Avraam I. Isayev


 Dr.   Avraam   I.   Isayev

Dr. Avraam I. Isayev

Distinguished Professor
Department of Polymer Engineering
Phone: 330-972-6673
Email: aisayev@uakron.edu



List of Publications

Monographs

  1. “Rheology: Conceptions, Methods, Applications”, A. Ya. Malkin and A. I. Isayev, ChemTec Publishing, Toronto, August 2006, 474 pp .

Books Edited

  1. "Injection and Compression Molding Fundamentals", Edited by A. I. Isayev, Marcel Dekker, Inc., New York, 1987, 703 pp.
  2. "Modeling of Polymer Processing ‑ Recent Developments", Edited by A. I. Isayev, Hanser Publishers, Munich, 1991, 312 pp.
  3. "Liquid Crystalline Polymer Systems: Technological Advances", Edited by A. I. Isayev, T. Kyu and S. Z. D. Cheng, ACS Symposium Series No. 632, Washington D.C., 1996, 418 pp.
  4. “Recycling of Rubbers”, Edited by S. K. De, A. I. Isayev and K. Khait, CRC Press, Boca Raton, 2005, 514 pp.
  5. “Injection Molding”, Edited by M. R. Kamal, A. I. Isayev and S.-J. Liu, Hanser, Munich (in preparation).

Papers in Books

  1. G. V. Vinogradov, Yu. G. Yanovsky and A. I. Isayev, "Action of Vibrations on Polymers", in Book Progress in Polymer Rheology, Edited by G. V. Vinogradov, Khimiya, Moscow, USSR, 1970, p. 79‑97.
  2. A. I. Isayev, "Generalized Presentation of Viscoelastic Properties of Polymeric Systems", in Book Relaxation Processes in Polymers, Baku, USSR, 1972.
  3. A. I. Isayev and E. V. Katsyutsevitch, "Large‑Amplitude Cyclic Deformation of Polymers in High‑Elastic State", in Book Rheology of Polymeric and Disperse Systems and Rheophysics, Edited by G. V. Vinogradov and Z. P. Shulman, Minsk, USSR, v. 1, 23‑34, 1975.
  4. Yu. Ya. Podolsky, V. I. Brizitsky and A. I. Isayev, "Polarization‑Optical Studies of the Flow of Linear Polymers", in Book Rheology of Polymeric and Disperse Systems and Rheophysics, Edited by G. V. Vinogradov and Z. P. Shulman, Minsk, USSR, v. 1, 3‑12, 1975.  
  5. A. I. Isayev, A. K. Kulapov and G. V. Vinogradov, "Apparatus for Measurement of Viscoelastic Properties of Polymers", in Book Vibrational Viscometry, Edited by S. Kutateladze, Novosibirsk, USSR, 1976, pp. 91‑106.
  6. A. I. Isayev and E. V. Katsyutsevich, "Rubbers and Thermoplastics at High Shear Stresses", in Book Machines and Technology of Rubber Processing, v. 1, Yaroslavl, USSR, 1977, pp. 27‑35.
  7. A. I. Isayev, "Injection Molding of Rubber Compounds", in Book Injection and Compression Molding Fundamentals, Edited by A. I. Isayev, Marcel Dekker, Inc., New York, 435‑479 (1987).
  8. A. I. Isayev and R. K. Upadhyay, "Flow of Polymeric Melts in Juncture Regions of Injection Molding", in Book Injection and Compression Molding Fundamentals, Edited by A. I. Isayev, Marcel Dekker, Inc., New York, 137‑225 (1987).
  9. A. I. Isayev, "Orientation, Residual Stresses and Volumetric Effects in Injection Molding", in Book Injection and Compression Molding Fundamentals, Edited by A. I. Isayev, Marcel Dekker, Inc., New York, 227‑328 (1987).
  10. A. I. Isayev, "Rheology and Injection Molding of Ceramic‑Filled Materials", in Advance in Ceramics, Edited by G. L. Messing, K. S. Mazdiyasni, J. C. McCauley and R. A. Haber, American Ceramic Society, Inc., Westerville, Ohio, v. 21, 601‑613 (1987).
  11. A. I. Isayev, "Injection Molding of Rubbers" in Comprehensive Polymer Science, Edited by S. L. Aggarwal, Pergamon Press, Oxford, v. 7, Chapter 11, pp. 355‑387, 1989.
  12. A. I. Isayev, “A Brief Overview of Modeling of Polymer Processing”, in Book Modeling of Polymer Processing - Recent Developments”, Edited by A. I. Isayev, Hanser Publishers, 1-18 (1991).
  13. M. Sobhanie and A. I. Isayev, “Simulation of Injection Molding of Rubber Compounds”, in Book “ Modeling of Polymer Processing - Recent Developments”, Edited by A. I. Isayev, Hanser Publishers, 205-246 (1991).
  14. N. Famili and A. I. Isayev, “Viscoelastic Modeling of Injection Molding”, Book “ Modeling of Polymer Processing - Recent Developments”, Edited by A. I. Isayev, Hanser Publishers, 247-276 (1991).
  15. A. I. Isayev and H. Y. Huang, "Planar Contraction or Expansion Flow of a Viscoelastic Plastic Medium: Experimentation and Simulation", in Recent Advances in Non‑Newtonian Flows, Edited by D. A. Siginer, ASME, New York, 113‑128 (1992).
  16. A. I. Isayev, J. Chen and S. P. Yushanov, "Ultrasonic Devulcanization of Waste Rubbers: Experimentation and Modeling", in Book Simulation of Materials Processing: Theory, Methods and Applications, Edited by S. F. Shen and P. Dawson, Balkema Publishers, Rotterdam, 77‑85 (1995).
  17. A. I. Isayev and T. R. Varma, "Blends of Polyamide Imides and Liquid Crystalline Polymer", in Book Liquid Crystalline Polymer Systems: Technological Advances, Edited by A. I. Isayev, T. Kyu and D. Cheng, ACS Symposium Series, Washington D.C., No. 632, 142-180 (1996).
  18. A. I. Isayev, "Self‑Reinforced Composites Involving LCP: Overview of Development and Applications", in Book Liquid Crystalline Polymer Systems: Technological Advances, Edited by A. I. Isayev, T. Kyu and D. Cheng, ACS Symposium Series, Washington D. C., No. 632, 1-20 (1996).
  19. C. Zook, Y. Zhang and A. I. Isayev, “Effect of Moving Boundary on Channel Flow of Polymeric Melts”, in Book Simulation of Materials Processing: Theory, Methods and Applications, Edited by J. Huetink and F. P. T. Baaijens, Balkema Publishers, Rotterdam, 429-434 (1998).
  20. A. I. Isayev, Y. Zhang and C Zook, “Flow of Polymeric Melts in Channels with Moving Boundaries” in Book Advances in the Flow and Rheology of Non-Newtonian Fluids, Edited by D. A. Siginer, D. DeKee and R. P. Chhabra, Elsevier Science, Amsterdam, 1011-1067 (1999).
  21. A. I. Isayev, “Molding Processes” in Book Handbook of Industrial Automation, Edited by R. L. Shell and E. L. Hall, Marcel Dekker, New York, Chapter 6-8, pp. 573-606, 2000.
  22. A. I. Isayev, “Rubber Recycling”, in Book Rubber Technologist’s Handbook, Eds. J. R. White and S. K. De, RAPRA Technology Ltd., UK, Chapter 15, pp. 511-547, 2001.
  23. A. I. Isayev, K. H. Kim and K. Kwon, “Modeling of Crystallization, Birefringence and Anizotropic Shrinkage in Injection Molding of Thermoplastics”, in Book Simulation of Materials Processing and Design: Modeling, Simulation and Applications, Edited by S. Ghosh, J. M. Castro and J. K. Lee, American Institute of Physics, Melville, New York, pp. 216-221, 2004.
  24. A. I. Isayev and Sayata Ghose, “Ultrasonic Devulcanization of Used Tires and Waste Rubbers”, in book Rubber Recycling, S. K. De, A. I. Isayev and K. Khait, eds., CRC Press, Boca Raton, Chapter 9, pp. 311-384, 2005.
  25. A. I. Isayev, “Recycling of Rubber”, in book Science and Technology of Rubber, Ed. J. E. Mark, B. Erman and F. R. Eirich, 3 rd Ed., Academic Press, New York, Chapter 15, pp. 663-701, 2005.
  26. A. I. Isayev and J. S. Oh, “Tire Materials: Recovery and Re-use”, in book The Pneumatic Tire, Eds. A. N. Gent and J. D. Walter, NHTSA U.S. Department of Transportation, Washington, DC, Chapter 18, pp. 670-691, 2005.
  27. A. I. Isayev and K. Kwon, “Volumetric and Anisotropic Shrinkage in Injection Moldings of Thermoplastics”, in book Injection Molding, Eds. M. R. Kamal, A. I. Isayev and Liu, Hanser, Munich, 2006 (submitted).

Papers in Encyclopedias

  1. A. I. Isayev, "Thermal Stresses" in Encyclopedia of Polymer Science and Engineering, John Wiley & Sons, New York, v. 16, pp. 747‑767, 1989.
  2. A. I. Isayev and T. Limtasiri," Liquid Crystalline Polymers", The International Encyclopedia of Composites, Edited by S. M. Lee, VCH Publishers, New York, v. 3, 55‑78 (1990).
  3. A. I. Isayev, "Thermal Stresses", in Concise Encyclopedia of Polymer Science and Engineering, Ed. by J. I. Kroschowitz, John Wiley & Sons, New York, pp. 1187‑1188 (1990).
  4. A. I. Isayev and T. Limtasiri, "Liquid‑Crystalline Composites", in Concise Encyclopedia of Composite Materials, Edited by S. M. Lee VCH Publishers, New York (1992).
  5. A. I. Isayev, “Recycling of Elastomers” in Encyclopedia of Materials: Science and Technology, Edited by K. H. J. Buschow, Elsevier, Amsterdam, v. 3, pp. 2474-2477 (2001).

Papers in Referred Journals:

1969

  1. G. V. Vinogradov, Yu. G. Yanovsky, A. I. Isayev, and V. A. Kargin, "Effect of Vibrations on Viscoelastic Behavior of Amorphous Polymers", Proceedings of the Academy of Sciences of the USSR, Phys. Chem. Sect. v. 197, 1075-1078, 1969.

1970  

  1. G. V. Vinogradov, Yu. G. Yanovsky, and A. I. Isayev, "Viscoelastic Behavior of an Amorphous Polymer under Oscillations of Large Amplitude", J. Polymer Sci., A-2, v. 8, 1239-60, 1970.
  2. A. I. Isayev and Yu. G. Yanovsky, "Vibrorheometer Having Coaxial Cylinders", Industrial Laboratory, v. 36, No. 12, 1950-54, 1970.
  3. G. V. Vinogradov, Yu. G. Yanovsky and A. I. Isayev, "Influence of Vibrations (Cyclic Deformations with Large Amplitudes) upon Viscoelastic Properties of a Polypropylene Melt", J. Eng. Phys., v. 19., No. 3, 1053‑58, 1970.
  4. A. I. Isayev, Yu. G. Yanovsky, G. V. Vinogradov, and L. A. Gordievsky, "Mechanical Parameters of Dispersed Systems under Cyclic Deformation with Various Amplitudes", J. Eng. Phys., v. 18, No. 6, 675‑78, 1970.

1971  

  1. G. V. Vinogradov, Yu. G. Yanovsky, A. I. Isayev, V. P. Shatalov and V. G. Shalganova, "Effect of Vibration on the Viscoelastic Behavior of Monodisperse Polybutadienes", Intern. J. Polymeric Materials, v. 1, No. 1, 17‑30, 1971; Intern. Chem. Eng., v. 12, No. 2, 234‑239, 1972; J. Eng. Physics, v. 20, No. 3, 273‑279, 1971; Rubber Chem. Technol., v. 45, No. 4, 1082‑1093, 1972.
  2. G. V. Vinogradov, Yu. G. Yanovsky, V. N. Pokrovsky, V. P. Shatalov, E. K. Borisenkova, V. G. Shalganova, V. V. Barancheeva, A. I. Isayev and V. A. Grechanowsky, "Critical Conditions of Deformation and Viscoelastic Properties of Linear Polymers in the Fluid State", Soviet Plastics, No. 5, 11‑19, 1971.

1972  

  1. A. I. Isayev, "Universal Relaxation Characteristics of Polymeric Systems", J. Eng. Physics, v. 23, No. 5, 1406‑12, 1972.

1973  

  1. A. I. Isayev, G. V. Berezhnaya and A. Ya. Malkin, "Universal Super‑Elasticity Characteristics of Polymeric Systems", J. Eng. Phys., v. 24, No. 1, 69‑73, 1973.
  2. A. I. Isayev, "General Characterization of Relaxation Properties and High Elasticity of Polymer Systems", J. Polym. Sci., Phys. Ed., v. 11, No. 11, 2123‑2133, 1973.
  3. G. P. Andrianova and A. I. Isayev, "Viscoelastic Properties of Polypropylene Melts Modified by Small Additions", Polym. Sci. USSR, v. 15, No. 8, 2086‑90, 1973.

1974  

  1. A. I. Isayev, K. D. Vachagin and A. M. Neberezhnov, "Engineering Method for Calculating the Flow of Polymers in Noncircular Channels", J. Eng. Phys., v. 27, No. 2, 998‑1002, 1974.

1975  

  1. A. I. Isayev, V. A. Zolotarev and G. V. Vinogradov, "Viscoelastic Properties of Bitumens under Continuous and Cyclic Deformations", Rheol. Acta, v. 14, No. 2, 135‑144, 1975.
  2. Nguen Vin Chii, A. I. Isayev, A. Ya. Malkin, G. V. Vinogradov and I. Yu. Kirchevskaya, "The Viscosity and Viscoelastic Properties of Mixtures and Block Copolymers of the Polybutadiene with Polyisoprene", Polym. Sci. USSR, v. 17, No. 4, 983‑989, 1975.
  3. V. I. Brizitsky, G. V. Vinogradov, A. I. Isayev and Yu. Ya, Podolsky, "Birefringence Measurement of Normal and Tangential Stresses in Polymer Flows", J. Eng. Phys, v, 29, No. 6, 1479‑84, 1975.
  4. A. Ya. Malkin, A. I. Isayev and G. V. Vinogradov, "Power Estimate of the Effectiveness of Vibrational Thinning of Polymer and Filled Systems", Polymer Mechanics, v. 11, No. 3, 349‑444, 1975.
  5. V. A. Zolotarev, A. I. Isayev and G. V. Vinogradov, "Viscoelastic Properties of Bitumens in Continuous and Cyclic Deformations", J. Eng. Phys. V. 29, No. 2, 1055‑1061, 1975.

1976  

  1. V. I. Brizitsky, C. V. Vinogradov, A. I. Isayev and Yu. Ya. Podolsky, "Polarization Optical Investigation of Normal and Shear Stresses in Flow of Polymers", J. Appl. Polymer Sci., v. 20, No. 1, 25‑40, 1976.
  2. A. I. Isayev, A. A. Konstantinov, A. K. Kulapov, B. A. Rogov, A. B. Bystrov and A. A. Shakhrai, "VR‑72 Vibrorheometer for Determining the Viscoelastic Properties of Polymers", Polymer Mechanics, No. 3, 502‑506, 1976.

1977  

  1. V. Z. Volkov, V. P. Fikhman, G. V. Vinogradov and A. I. Isayev, "The Entrance Effects in Viscoelastic Fluid Flow in Cylindrical Nozzles", J. Eng. Physics, v. 32, No. 1, 51‑55, 1977.
  2. G. V. Vinogradov, A. I. Isayev, V. I. Brizitsky, Yu. Ya. Podolsky, A. Ya. Malkin and M. P. Zabugina, "Die Swell, Normal Stress and Viscoelastic Deformations in Polymer Flow", Polymer Mechanics, v. 13, No. 1, 112‑117, 1977.
  3. G. V. Vinogradov, A. I. Isayev, V. A. Zolotarev and E. A. Verebskaya, "Rheological Properties of Road Bitumens", Rheol. Acta, v. 16, No. 3, 266‑281, 1977.
  4. A. N. Prokunin, A. I. Isayev and E. Kh. Lipkina, "Parallel Superpositionof Oscillatory Motion on the Steady Flow of Polymeric Liquids", Polymer Mechanics, v. 13, No. 4, 589‑94, 1977.

1978  

  1. V. G. Vinogradov, A. I. Isayev, D. A. Mustafayev and Yu. Ya, Podolsky, "Polarization‑Optical Investigation of Polymers in Fluid and High‑elastic States Under Oscillatory Deformation", J. Appl. Polymer Sci., v. 22, No. 3, 665‑677, 1978.
  2. V. I. Brizitsky, G. V. Vinogradov, A. I. Isayev and Yu. Podolsky, "Extensional Stresses During Polymer Flow in Ducts", J. Appl. Polymer Sci., v. 22, No. 3, 751‑767, 1978.
  3. G. V. Vinogradov, A. I. Isayev and E. V. Katsyutsevich, "Critical Regimes and Oscillatory Deformation of Polymeric Systems Above Glass Transition and Melting Temperatures", J. Appl. Polymer Sci., v. 22, No. 3, 727‑749, 1978.

1980  

  1. A. I. Isayev and D. Katz, "Large Amplitude Cyclic Deformation of a Crosslinked Epoxy Resin in the Transition Zone", Intern. J. Polymeric Materials, v. 8, 25‑43, 1980.
  2. D. Katz, Y. Smooha and A. I. Isayev, "Dynamic Properties of an Unfilled and Filled Epoxy Resin Subjected to Extensional Creep", J. Materials Science, v. 15, 1167‑1174, 1980.
  3. A. I. Isayev and C. A. Hieber, "Toward a Viscoelastic Modeling of the Injection Molding of Polymers", Rheol. Acta, v. 19, 168‑182, 1980.

1981  

  1. A. I. Isayev, D. Katz and Y. Smooha, "Dynamic Properties of Crosslinked Epoxy Resin at Large Cyclic and Static Deformation", Polym. Eng. Sci., v. 21, No. 9, 566‑570, 1981.
  2. R. K. Upadhyay, A. I. Isayev and S. F. Shen, "Transient Shear Flow Behavior of Polymeric Fluids According to the Leonov Model", Rheol. Acta, v. 20, No. 5, 443‑457, 1981.

1982  

  1. A. I. Isayev and C. A. Hieber, "Oscillatory Shear Flow of Polymeric Systems", J. Polymer Sci., Polymer Physics Ed., v. 20, No. 3, 423‑440, 1982.

1983  

  1. C. A. Hieber, L. S. Socha, S. F. Shen, K. K. Wang and A. I. Isayev, "Filling Thin Cavities of Variable Gap Thickness: A Numerical and Experimental Investigation", Polym. Eng. Sci., v. 23, No. 1, 20‑26, 1983.
  2. A. I. Isayev, "Orientation Development in the Injection Molding of Amorphous Polymers", Polym. Eng. Sci., v. 23, No. 5, 271‑88, 1983.
  3. R. K. Upadhyay, A. I. Isayev and S. F. Shen, "Modeling of Stresses in Multi‑Step‑Shear Deformation of Polymeric Fluids", J. Rheol., v. 27, No. 2, 155‑169, 1983.
  4. R. K. Upadhyay and A. I. Isayev, "Elongational Flow Behavior of Polymeric Fluids According to the Leonov Model", Rheol. Acta, v. 22, 557‑568, 1983.

1984

  1. R. K. Upadhyay and A. I. Isayev, "Nonisothermal Elongational Flow of Polymeric Fluids According to the Leonov Model", J. Rheol., v. 28, 581‑600, 1984.
  2.  A. I. Isayev and D. L. Crouthamel, "Residual Stress Development in the Injection Molding of Polymers", Polymer Plastics Technology and Engineering, v. 22, No. 2, 177‑232, 1984.
  3.  A. I. Isayev, "Unsteady Channel Flow of Polymeric Fluids", J. Rheol., v. 28, 4, 411-438, 1984.

1985

  1. A. I. Isayev and B. Chung, "Flow of Polymeric Melts in Short Tubes", Polym. Eng. Sci., v. 25, 5, 264‑270, 1985.
  2. A. I. Isayev and T. Hariharan, "Volumetric Effects in the Injection Molding of Polymers", Polym. Eng. Sci., v. 25, 5, 271‑278, 1985.
  3. A. I. Isayev and R. K. Upadhyay, "Two‑Dimensional Viscoelastic Flows, Experimentation and Modelling", J. Non‑Newt. Fluid Mech., v. 19, 135‑160, 1985.
  4. Y. A. Ma, J. L. White, F. C. Weissert, A. I. Isayev, N. Nakajima and K. Min, "Flow Patterns in Elastomers and Their Carbon Black Compounds During Extrusion Through Dies", Rubber Chem. Technol., 58, 4, 815‑829, 1985.

1986

  1. R. K. Upadhyay and A. I. Isayev, "Simulation of Two‑Dimensional Planar Flow of Viscoelastic Fluid", Rheol. Acta, v. 25, 80‑94, 1986.
  2. A. I. Isayev and A. D. Azari, "Viscoelastic Effect in Compression Molding of Elastomers: Shear‑Free Squeezing Flow", Rubber Chem. Technol., 59, 5, 868‑882, 1986.
  3. A. I. Isayev and N. Famili, "Simulation of Nonisothermal Extrusion of Viscoelastic Melt in Slit Die", J. Plastic Film and Sheeting, v. 2, 269‑297, 1986.

 

1987

  1. A. I. Isayev and M. Modic, "Self‑Reinforced Melt Processible Polymer Composites. Extrusion, Compression and Injection Molding", Polymer Composites, v. 8, 269‑297, 1987.
  2. J. L. White, Y. Wang, A. I. Isayev, N. Nakajima, F. C. Weissert and K. Min, "Modeling of Shear Viscosity Behavior and Extrusion Through Dies of Rubber Compounds", Rubber Chem. Technol., 60, 2, 337‑360, 1987.

1988

  1. A. I. Isayev, and J. S. Deng, "Nonisothermal Vulcanization of Rubber Compounds", Rubber Chem. Technol., 61, 340‑361, 1988.
  2. A. I. Isayev, M. Sobhanie and J. S. Deng, "Two‑Dimensional Simulation of Injection Molding of Rubber Compounds", Rubber Chem. Technol., 61, 906‑937, 1988.
  3. A. I. Isayev and C. M. Wong, "Parallel Superposition of Small and Large Amplitude Oscillations upon Steady Shear Flow of Polymer Fluids, J. Polym. Sci., Polymer Phys., 26, 2303‑2327, 1988.

1989

  1. M. Sobhanie and A. I. Isayev, "Viscoelastic Simulation of Flow of Rubber Compounds", Rubber Chem. Technol., 62, 5, 939‑956, 1989.
  2. C. M. Wong and A. I. Isayev, "Orthogonal Superposition of Small and Large Amplitude Oscillations Upon Steady Shear Flow of Polymeric Fluids", Rheol. Acta, 28, 176‑189, 1989.
  3. A. I. Isayev and Y.‑H. Huang, "Unsteady Flow of Rubber Compounds at Injection Molding Conditions", Advances in Polymer Technology, 9, No. 3, 167‑180, 1989.
  4. M. Sobhanie, J. S. Deng and A. I. Isayev, "Simulation and Experimental Studies of Injection Molding of Rubber Compounds", J. Appl. Polym. Sci., Applied Polymer Symposium, 44, 115‑165, 1989.

1990  

  1. A. I. Isayev, C. M. Wong and X. Zeng, "Flow of Thermoplastics in an Annular Die Under Orthogonal Oscillations", J. Non‑Newt. Fluid Mech., 34, 375‑397, 1990.
  2. A. I. Isayev and Xiyun Fan, "Viscoelastic Plastic Constitutive Equation for Flow of Particle Filled Polymers", J. Rheol., 34, 1, 35‑54, 1990.
  3. C. M. Wong, C. H. Chen and A. I. Isayev, "Flow of Thermoplastics in an Annular Die under Parallel Oscillations", Polymer Eng. Sci., 31, 1514-1584, 1990.
  4. A. I. Isayev, C. M. Wong and X. Zeng, "Effect of Oscillations During Extrusion on Rheology and Mechanical Properties of Polymers", Advances in Polymer Technology, 10, No. 1, 31‑45, 1990.

1991  

  1. J. S. Deng and A. I. Isayev, "Injection Molding of Rubber Compounds- Experimentation and Simulation", Rubber Chem. Technol., 64, 2, 296‑324, 1991.
  2. T. Limtasiri and A. I. Isayev, "Blends of Thermotropic Polyester with Poly(phenylene Oxide)", J. Appl. Polym. Sci., 42, 2923‑2932, 1991.
  3. P. R. Subramanian and A. I. Isayev, "Blends of Thermotropic Polyester with Poly(phenylene Sulfide)", Polymer, 32, 1961‑1969, 1991.
  4. A. Mehta and A. I. Isayev, "The Dynamic Properties, Temperature Transitions and Thermal Stability of PEEK‑Thermotropic Liquid Crystalline Polymer Blends", Polym. Eng. Sci., 31, 963‑970, 1991.
  5. A. Mehta and A. I. Isayev, "Rheology, Morphology and Mechanical Characteristics of PEEK‑LCP Blends", Polym. Eng. Sci., 31, 971‑980, 1991.
  6. A. I. Isayev and S. Mandelbaum, "Effect of Ultrasonic Waves on Foam Extrusion", Polym. Eng. Sci., 31, 1051‑1056, 1991.
  7. A. I. Isayev and Toru Hosaki, "Temperature in Rubber Moldings During Injection Molding Cycle: Simulation and Experimentation", Journal of Elastomers and Plastics, 23, 176‑191, 1991.
  8. A. Buchman and A. I. Isayev, "Water Absorption of Some Thermoplastic Composites", SAMPE Journal, 31, No. 4, 30‑36, 1991.
  9. A. Buchman and A. I. Isayev, "Quality Assurance of Various Thermoplastic Composites", SAMPE Journal, 31, No. 4, 19‑27, 1991.
  10. H. J. Kang, E. Buchman and A. I. Isayev, "Measurement of Processing Variables in Manufacturing of Thermoplastic Composites", SAMPE Journal, 31, No. 5, 21‑27, 1991.

1992

  1. A. I. Isayev and P. R. Subramanian , "Blends of a Liquid Crystalline Polymer with Polyether Ether Ketone", Polym. Eng. Sci., 32, 85‑93, 1992.
  2. R. Garcia‑Ramirez and A. I. Isayev, "Helical Flow of a Viscoelastic Fluid‑an Approximation Towards Rotational Extrusion", J. Rheol., 36, 1183-1211, 1992.

1993

  1. S. Akhtar and A. I. Isayev, "Self‑Reinforced Composites of Two Thermotropic Liquid Crystalline Polymers", Polym. Eng. Sci., 33, 32‑42, 1993.
  2. Y. H. Huang and A. I. Isayev, "An Experimental Study of Planar Entry Flow of Rubber Compound", Rheol. Acta, 32, 270‑276, 1993.
  3. A. I. Isayev and Y. H. Huang, "Two‑Dimensional Planar Contraction and Expansion Flow of a Viscoelastic Plastic Medium", Rheol. Acta, 32, 181‑191, 1993.
  4. F. Cai and A. I. Isayev, "Dynamic Vulcanization of Thermoplastic Copolyester Elastomer/Nitrile Rubber Alloys I: Various Mixing Methods", J. Elast. Plast., 25, 74‑89 (1993); Advances in Elastomers, 1, 153‑168, 1994.
  5. F. Cai and A. I. Isayev, "Dynamic Vulcanization of Thermoplastic Copolyester Elastomer/Nitrile Rubber Alloys II: Rheology, Morphology and Properties", J. Elast. Plast. 25, 249‑265, 1993.
  6. T. W. Chan, G. D. Shyu and A. I. Isayev, "Reduced Time Approach to Nonisothermal Kinetics. Part 1: Dynamic Rate and Master Curve from Isothermal Data", Rubber Chemistry and Technology, 66, 849‑864, 1993.

1994

  1. T. W. Chan and A. I. Isayev, "Quiescent Polymer Crystallization: Modeling and Measurements", Polym. Eng. Sci., 34, 461‑471, 1994.
  2. A. I. Isayev, Y. Holdengreber, R. Viswanathan and S. Akhtar, "Self‑Reinforced Thermoplastic‑LCP Prepregs and Laminates", Polymer Composites, 15, No.4, 254‑260, 1994.
  3. A. I. Isayev, R. J. Scavuzzo and Y. Kuroyama, "Injection Molding of Rubber Compounds: Cavity Filling, Packing and Flash Formaton”, J. Appl. Polym. Sci., Applied Polymer Symposium, 53, 233-252, 1994.
  4. G. D. Shyu, T. W. Chan and A. I. Isayev, "Reduced Time Approach to Curing Kinetics, Part 2: Master Curve from Nonisothermal Data", Rubber Chemistry and Technology, 67, 314‑328, 1994.
  5. A. I. Isayev and X. Fan, "Steady and Oscillatory Flow of Silicon‑Propylene Ceramic Compound", J. Mater. Sci., 29, 2931‑2938, 1994.

 

1995

  1. T. W. Chan, G. D. Shyu and A. I. Isayev, "Master Curve Approach to Polymer Crystallization Kinetics", Polym. Eng. Sci., 35, 733‑740, 1995.
  2. R. Ding and A. I. Isayev, "Self‑Reinforced LCP‑LCP Blends, Prepregs and Laminates", J. Thermoplastic Composite Materials, 8, 208‑224, 1995.  
  3. R. Viswanathan and A. I. Isayev, "Blends of a PPO-PS alloy with a Liquid Crystalline Polymer", J. Appl. Polym. Sci., 55, 1117‑1129, 1995.  
  4. A. I. Isayev and R. Viswanathan, "Self‑Reinforced Prepregs and Laminates of a PPO‑PS Alloy with a Liquid Crystalline Polymer", Polymer, 36, 1585-1596, 1995.  
  5. A. I. Isayev, T. W. Chan, K. Shimojo and M. Gmerek, "Injection Molding of Semicrystalline Polymers, Part 1: Material Characterization", J. Appl. Polym. Sci., 55, 807‑819, 1995.  
  6. A. I. Isayev, T. W. Chan, M. Gmerek and K. Shimojo, "Injection Molding of Semicrystalline Polymers, Part 2: Modeling and Experimentation", J. Appl. Polym. Sci., 55, 821‑838, 1995.
  7. A. I. Isayev, J. Chen and A. Tukachinsky, "Novel Ultrasonic Technology for Devulcanization of Waste Rubbers", Rubber Chemistry and Technology, 68, 267‑280, 1995; Gummi Fasern Kunststoffe, 48, 550‑559, 1995.

1996

  1. A. Tukachinsky, D. Schworm and A. I. Isayev, "Devulcanization of Waste Tire Rubber by Powerful Ultrasound", Rubber Chemistry and Technology, 69, 92‑103, 1996.
  2. V. Yu. Levin, S. H. Kim, A. I. Isayev, J. Massey and E. von Meerwall, "Ultrasound Devulcanization of Sulfur Vulcanized SBR: Crosslink Density and Molecular Mobility", Rubber Chemistry and Technology, 69, 104-114, 1996.
  3. A. I. Isayev, S. P. Yushanov and J. Chen, "Ultrasonic Devulcanization of Rubber Vulcanizates. Part 1: Process Model", J. Appl. Polym. Sci., 59, 803‑813, 1996.
  4. A. I. Isayev, S. P. Yushanov and J. Chen, "Ultrasonic Devulcanization of Rubber Vulcanizates. Part 2: Simulation and Experiment", J. Appl. Polymer Sci., 59, 815‑824, 1996.
  5. A. I. Isayev and M. Wan, "Injection Molding of Rubber Compound with Rheology Affected by Vulcanization, Part 1: Material Characterization", Rubber Chemistry and Technology, 69, 277‑293, 1996.
  6. M. Wan and A. I. Isayev, "Injection Molding of Rubber Compound with Rheology Affected by Vulcanization, Part 2: Modeling and Experiment", Rubber Chemistry and Technology, 69, 294‑312, 1996.
  7. A. I. Isayev, S. P. Yushanov, D. Schworm and A. Tukachinsky, "Modeling of Ultrasonic Devulcanization of Tyre Rubbers and Comparison with Experiments", Plastics, Rubber and Composites Processing and Applications, 24, 1-12, 1996.
  8. A. I. Isayev, D. Cao and B. Dinzburg, "Elastic Recovery of Rubber Vulcanizates at Very Short Times", J. Elastomers and Plastics, 28, 344-381, 1996.
  9. S. P. Yushanov, A. I. Isayev and V. Yu. Levin, "Percolation Simulation of the Network Degradation during Ultrasonic Devulcanization", J. Polymer Science, Physics Ed., 34, 2409-2418, 1996.
  10. A. I. Isayev, S. P. Yushanov, S. H. Kim and V. Yu. Levin, "Ultrasonic Devulcanization of Waste Rubbers: Experimentation and Modeling", Rheologica Acta, 35, 616-630, 1996.

1997  

  1. V. Yu. Levin, S. H. Kim and A. I. Isayev, "Vulcanization of Ultrasonically Devulcanized SBR Elastomers", Rubber Chemistry and Technology, 70, 120-128 (1997); Gummi Fasern Kunststoffe, 51, 898-905, 1998.
  2. A. I. Isayev and B. F. Catignani, "Crystallization and Microstructure in Quenched Slabs of Various Molecular Weight Polypropylenes", Polymer Engineering and Science, 37, 1526-1539, 1997.
  3. M. Sobhanie, A. I. Isayev and X. Fan, "Viscoelastic‑Plastic Rheological Model for Particle Filled Polymer Melts", Rheologica Acta, 36, 66-81, 1997.
  4. W. Bu and A. I. Isayev, "Prepregs and Laminates of Polyetherimide Reinforced by Thermotropic LCP", J. Applied Polymer Science, 64, 329-340, 1997.
  5. S. T. Johnston, J. Massey, E. von Meerwall, S. H. Kim, V. Yu. Levin and A. I. Isayev, "Ultrasound Devulcanization of SBR: Molecular Mobility of Gel and Sol", Rubber Chemistry and Technology, 70, 183-193, 1997.
  6. A. I. Isayev, S. H. Kim and V. Yu. Levin, "Reclaimed SBR with Superior Mechanical Properties", Rubber Chemistry and Technology, 70, 194-201, 1997.
  7. V. Yu. Levin, S. H. Kim and A. I. Isayev, "Effect of Crosslink Type on the Ultrasound Devulcanization of SBR Vulcanizates", Rubber Chemistry and Technology, 70, 641-649, 1997.

1998

  1. S. P. Yushanov, A. I. Isayev and S. H. Kim, "Ultrasonic Devulcanization of SBR Rubber: Experimentation and Modeling Based on Cavitation and Percolation Theories", Rubber Chemistry and Technology, 71, 168-190, 1998.
  2. T. Luo and A. I. Isayev, “Rubber/Plastic Blends Based on Devulcanized Ground Tire Rubber”, J. Elastomers and Plastics, 30, 133-160, 1998.
  3. B. Diao, A. I. Isayev, V. Yu. Levin and S. H. Kim, “Surface Behavior of Blends of SBR with Ultrasonically Devulacanized Silicone Rubber”, J. Applied Polymer Science, 69, 2691-2696, 1998.
  4. M. Tapale and A. I. Isayev, “Continuous Ultrasonic Devulcanization of Unfilled NR Vulcanizates”, J. Applied Polymer Science, 70, 2007-2019, 1998.
  5. C. H. Song and A. I. Isayev, “Nanocomposites of PET and PET/HBA Based LCP”, Journal of Polymer Engineering, 18, 417-450, 1998.
  6. A. I. Isayev and M. Wan, “Injection Molding of Natural Rubber Compound: Simulation and Experimental Studies”, Rubber Chemistry and Technology, 71, 1059-1072, 1998.

1999

  1. M. Sobhanie and A. I. Isayev, "Experimental and Theoretical Investigation of Shear Flow of a Filled Polymer”, J. Non-Newt. Fluid Mech., 85, 189-212, 1999.
  2. B. Diao, A. I. Isayev and V. Yu. Levin, “Basic Study of Continuous Ultrasonic Devulcanization of Silicone Rubber”, Rubber Chemistry and Technology, 72, 152-164 (1999); Kautchuk Gummi Kunststoffe, 52, 438-445, 1999.
  3. B. de Carvalho, R. E. S. Bretas and A. I. Isayev, “Crystallization and Microstructure in Quenched Slabs of Various Molecular Weight Polypropylenes: Modified Modeling and Experiments”, J. Applied Polymer Science, 73, 2003-2015, 1999.
  4. X. Guo, A. I. Isayev and L. Guo, “Crystallinity and Microstructure in Injection Moldings of Isotactic Polypropylenes. Part I. A New Approach to Modeling and Model Parameters”, Polym. Eng. Sci., 39, 2096-2114, 1999.
  5. X. Guo, A. I. Isayev and M. Demiray, “Crystallinity and Microstructure in Injection Molding of Isotactic Polypropylenes. Part II. Simulation and Experiments”, Polym. Eng. Sci., 39, 2132-2149 (1999).
  6. V. V. Yashin and A. I. Isayev, “A Model for Rubber Degradation Under Ultrasonic Treatment. Part I: Acoustic Cavitation in Viscoelastic Solid”, Rubber Chem. Technol., 72, 741-757, 1999.
  7. X. Guo and A. I. Isayev, “Residual Stresses and Birefringence in Injection Molding of Semicrystalline Polymer, Part 1: Theoretical Formulation”, Intern. Polym. Process., 14, 377-386, 1999.
  8. X. Guo and A. I. Isayev, “Residual Stresses and Birefringence in Injection Molding of Semicrystalline Polymer, Part 2: Experiment and Simulation”, Intern. Polym. Process., 14, 387-398, 1999.

2000

  1. X. Guo and A. I. Isayev, “Thermal Residual Stresses in Freely Quenched Slabs of Semicrystalline Polymers: Simulation and Experiment”, J. Applied Polymer Science, 75, 1404-1415, 2000.
  2. A. I. Isayev, Y. Churdpunt and X. Guo, “Comparative Study of Ziegler-Natta and Metallocene Based Polypropylenes in Injection Molding: Simulation and Experiment”, Intern. Polym. Process., 15, 72-82, 2000.
  3. Y. Churdpunt and A. I. Isayev, “Comparison of Birefringence and Mechanical Properties of Injection Molded Metallocene and Ziegler-Natta Based Isotactic Polypropylenes,” J. Polymer Eng., 20, 77-96, 2000.
  4. Chris Zook and A. I. Isayev, “Simulation and Experimental Studies of a Non-return Valve Performance during Injection Molding”, J. Injection Molding Technology, 4, 65-77, 2000.
  5. V. V. Yashin and A. I. Isayev, A Model of Rubber Degradation Under Ultrasonic Treatment. Part II: Rupture of Rubber Network and Comparison with Experiments”, Rubber Chem Technol., 73, 325-339, 2000.
  6. C. H. Song and A. I. Isayev, “Self-Reinforced Composites of Various Polyesters with PET/HBA Based LCP”, Journal of Polymer Engineering, 20, 427-457, 2000.

2001

  1. C. K. Hong and A. I. Isayev, “Plastic/Rubber Blends of Ultrasonically Devulcanized GRT with HDPE”, J. Elastomers and Plastics, 33, 47-71, 2001.
  2. C. H. Song and A. I. Isayev, “LCP Droplet Deformation in Fiber Spinning Self-Reinforced Composites”, Polymer, 42, 2611-2619, 2001.
  3. C. K. Hong and A. I. Isayev, “Continuous Ultrasonic Devulcanization of Carbon Black Filled NR Vulcanizates”, J. Applied Polymer Science, 79, 2340-2348, 2001.
  4. S. E. Shim and A. I. Isayev, “Ultrasionic Devulcanization of Precipitated Silica Filled Silicone Rubber”, Rubber Chem. Technol., 74, 303-316, 2001; Gummi Fasern Kunststoffe, 55, #5, 304-311 (2002).
  5. J. Yun and J. S. Oh and A. I. Isayev, “Ultrasonic Devulcanization Reactors for Recycling of GRT: Comparative Study”, Rubber Chem. Technol., 74, 317-330, 2001.
  6. G. Havet and A. I. Isayev, “A Thermodynamic Approach to the Rheology of Highly Interactive Filler- Polymer Mixtures: Part I-Theory”, Rheologica Acta, 40, 570-581, 2001.
  7. G. D. Shyu, A. I. Isayev and C. T. Li, “Photoviscoelastic Behavior of Amorphous Polymers during Transition from the Glassy to Rubbery State”, J. Polym. Sci., Phys. Ed., 39, 2252-2262, 2001.

2002

  1. C. K. Hong and A. I. Isayev, “Blends of Ultrasonically Devulcanized and Virgin Carbon Black Filled NR”, J. Materials Science, 37, 385-388, 2002.
  2. C. K. Hong and A. I. Isayev, “Continuous Ultrasonic Devulcanization of NR/SBR Blends”, J. Applied Polymer Science 83, 160-168, 2002.
  3. Y. C. Liang and A. I. Isayev, “Self-reinforced Polypropylene/LCP Prepregs and Laminates”, Polymer Composites, 23, 702-722, 2002.
  4. Y. C. Liang and A. I. Isayev, “Self-reinforced Polypropylene/LCP Extruded Strands and Their Moldings”, Polymer Engineering and Science, 42, 994-1018, 2002.
  5. J. S. Oh and A. I. Isayev, “Ultrasonically Treated Polypropylene/Ground Tire Rubber Blends”, Rubber Chem. Technol., 75, 617-625, 2002.
  6. C. K. Hong and A. I. Isayev, “Ultrasonic Devulcanization of Unfilled SBR Under Static and Continuous Conditions”, Rubber Chem. Technol., 75, 133-142, 2002.
  7. Jin-Woong Shin and A. I. Isayev, “Experimental Study of Gas Penetration in the Gas-Assisted Injection Molding”, J. Injection Molding Technol., 6, 314-330, 2002.
  8. S. E. Shim, S. Ghose and A. I. Isayev, “Formation of Bubbles during Ultrasonic Treatment of Cured Polydimethylsiloxane”, Polymer, 43, 5535-5543, 2002.
  9. S. E. Shim, J. C. Parr, E. D. von Meerwall and A. I. Isayev, “NMR Relaxation and Pulsed Gradient NMR Diffusion Measurements of Ultrasonically Devulcanized Polydimethylsiloxane”, J. Phys. Chem., B, 106, 12072-12078, 2002.

2003

  1. J. Yun, A. I. Isayev, S. H. Kim and M. Tapale, “Comparative Analysis of Ultrasonically Devulcanized Unfilled SBR, NR and EPDM Rubbers’, J. Appl. Polym. Sci., 88, 434-441, 2003.
  2. J. Yun and A. I. Isayev, “Superior Mechanical Properties of Ultrasonically Recycled EPDM Rubber”, Rubber Chem. Technol., 76, 253-270, 2003; Gummi Fasern Kunststoffe, 55, 10, 628-637, 2002.
  3. S. E. Shim, A. I. Isayev, and E. von Meerwall, “Molecular Mobility of Ultrasonically Devulcanized Filled Polydimethylsiloxane Elastomers”, J. Polym. Sci., Phys. Ed., 41, 454-465, 2003.
  4. G. Havet and A. I. Isayev, “A Thermodynamic Approach to the Rheology of Highly Interactive Filler- Polymer Mixtures: Part II-Comparison with Polystyrene/Nanosilica Mixtures”, Rheologica Acta, 42, 47-55, 2003.
  5. A. I. Isayev and C. K. Hong, “Novel Ultrasonic Process for In-situ Copolymer Formation and Compatibilization of Immiscible Polymers”, Polym. Eng. Sci., 43, 91-101, 2003.
  6. S. E. Shim and A. I. Isayev, “Effects of the Presence of Water on Ultrasonic Devulcanization of Polydimethylsiloxane”, J. Appl. Polym. Sci., 88, 2630-2638, 2003 .
  7. C. T. Li and A. I. Isayev, “Interface Development and Encapsulation in Simultaneous Co-injection Molding of Disk: Part I: Two-dimensional Modeling and Formulation”, J. Appl. Polym. Sci., 88, 2300-2309, 2003.
  8. C. T. Li, D. J. Lee and A. I. Isayev, “ Interface Development and Encapsulation in Simultaneous Co-injection Molding of Disk. Part II: Two-dimensional Simulation and Experiment”, J. Appl. Polym. Sci., 88, 2310-2318, 2003.
  9. S. Ghose and A. I. Isayev, “Recycling of Unfilled Polyurethane Rubber Using High Power Ultrasound’, J. Appl. Polym. Sci., 88, 980-989, 2003.
  10. V. V. Yashin and A. I. Isayev, “On the Theory of Radical Depolymerization: A Rigorous Solution”, J. Polym. Sci., Phys. Ed., 41, 965-982, 2003.
  11. J. Yun and A. I. Isayev, "Recycling of Roofing Membrane Rubber by Ultrasonic Devulcanization”, Polym. Eng. Sci., 43, 809-821, 2003.
  12. J. S. Oh, A. I. Isayev and M. A. Rogunova, “Continuous Ultrasonic Process for In-situ Compatibilization of Polypropylene/Natural Rubber Blends”, Polymer, 44, 2337-2349, 2003.
  13. A. I. Isayev, “Ultrasonic-aided Extrusion for Recycling of Rubbers and Copolymerization of Polymer Blends”, Elastomer, 38, 38-50, 2003.
  14. C. K. Hong and A. I. Isayev, “An application of high-power ultrasound to rubber recycling”, Elastomer, 38(2), 103-121, 2003.
  15. G. D. Shyu, A. I. Isayev and C. T. Li, “Residual Thermal Birefringence in Freely Quenched Plates of Amorphous Polymers: Simulation and Experiment”, J. Polym. Sci., Phys. Ed., 41, 1850-1867, 2003.
  16. J. S. Oh, S. Ghose and A. I. Isayev, “Effects of Ultrasonic Treatment on Unfilled Butadiene Rubber”, J. Polymer Science, Polym. Phys. Ed., 41 (22), 2959-2968, 2003.
  17. G. D. Shyu, A. I. Isayev and H. S. Lee, “Numerical Simulation of Flow-Induced Birefringence in Injection Molded Disk”, Korea-Australia Rheology Journal, 15, 159-166, 2003.
  18. A. I. Isayev, C. K. Hong and K. J. Kim, “Continuous Mixing and Compounding of Polymer/Filler and Polymer/ Polymer Mixtures with the Aid of Ultrasound”, Rubber Chem. Technol., 76, 923-947, 2003.

2004

  1. J. Yun, V. V. Yashin and A. I. Isayev, “Ultrasonic Devulcanization of Carbon Black Filled Ethylene Propylene Diene Monomer Rubber”, J. Appl. Polym. Sci., 91, 1646-1656, 2004.
  2. W. Feng and A. I. Isayev, “In-situ Ultrasonic Compatibilization of PP/EPDM Blends during Ultrasound Aided Extrusion”, Polymer, 45 , 1207-1216, 2004.
  3. C. H. Scuracchio, A. I. Isayev and R.E.S. Bretas, “Blends of PS with SBR Devulcanized by Ultrasound: Rheology and Morphology", Journal of Elastomers and Plastics, 36, 45-75, 2004.
  4. J. Yun and A. I. Isayev, “Blends of Ultrasonically Devulcanized and Virgin Carbon Black Filled EPDM Rubbers”, J. Appl. Polym. Sci., 92, 132-138, 2004.
  5. S. E. Shim and A. I. Isayev, “Rheology and Structure of Precipitated Silica and Polydimethylsiloxane System, Rheol. Acta, 43, 127-136, 2004.
  6. V. V. Yashin, C. K. Hong and A. I. Isayev, “Thermomechanical Degradation of SBR During Ultrasonic Treatment Under the Static Conditions”, Rubber Chem. Technol., 77, 50-77, 2004.
  7. J. S. Oh, A. I. Isayev, T. Wagler, P. L. Rinaldi and E. von Meerwall, “Molecular Mobility and Structure of Ultrasonically Treated Unfilled Butadiene Rubber”, J. Polym. Sci., Phys. Ed., 42, 1875-1887, 2004.
  8. S. Ghose, A. I. Isayev, and E . von Meerwall, “Effect of Ultrasound on Thermoset Polyurethane: NMR Relaxation and Diffusion Measurements”, Polymer, 45, 3709-3720, 2004.
  9. J. S. Oh and A. I. Isayev, “Continuous Ultrasonic Devulcanization of Unfilled Butadiene Rubber”, J. Applied Polymer Science, 93, 3, 1166-1174, 2004.
  10. C. T. Li and A. I. Isayev, “Interface Evolution and Penetration Behavior During Two-component Transfer Molding. Part I: Modeling and Formulation”, Polym. Eng. Sci., 44 ,4, 687-696, 2004.
  11. C. T. Li, A. I. Isayev and R. L. Warley, “Interface Evolution and Penetration Behavior During Two-component Transfer Molding. Part II: Simulation and Experiment”, Polym. Eng. Sci., 44 ,4, 697-713, 2004
  12. S. Ghose and A. I. Isayev, “Improved Properties of Blends of Ultrasonically Treated Unfilled Polyurethane Rubber”, Polym. Eng. Sci., 44, 4, 794-804, 2004
  13. C. T. Li and A. I. Isayev, “Primary and Secondary Gas Penetration during Gas-assisted Injection Molding. Part I: Formulation and Modeling”, Polym. Eng. Sci., 44, 5, 983-991, 2004.
  14. C. T. Li, J. W. Shin, A. I. Isayev and H. S. Lee “Primary and Secondary Gas Penetration during Gas-assisted Injection Molding. Part II: Simulation and Experiment”, Polym. Eng. Sci., 44, 5, 992-1002, 2004.
  15. Sayata Ghose and A. I. Isayev, “Continuous Process for Recycling of Polyurethane Foam”, J. Cellular Plastics, 40, 3, 167-189, 2004 .
  16. S. E. Shim, V. V. Yashin and A. I. Isayev, “Enviromentally-Friendly Physico-Chemical Rapid Ultrasonic Recycling of Fumed Silica Filled Poly(dimethyl siloxane) Vulcanizate, Green Chemistry, 6, 291-294, 2004.
  17. V. V. Yashin and A. I. Isayev, “The Effect of Polydispersity on Structure of Ultrasonically Treated Rubbers”, Polymer, 45 , 17, 6083-6094, 2004.
  18. Sayata Ghose and A. I. Isayev “Ultrasonic devulcanization of carbon black filled polyurethane rubber", J. Elast. Plastics, 36, 3, 213-239, 2004.
  19. W. Feng and A. I. Isayev, “Continuous Ultrasonic Devulcanization of Unfilled Butyl Rubber”, J. Appl. Polym. Sci., 94, 3, 1316-1325, 2004.
  20. W. Feng and A. I. Isayev, “In-situ Ultrasonic Compatibilization of Unvulcanized and Dynamically Vulcanized PP/EPDM Blends”, Polym. Eng. Sci., 44, 11, 2019-2028, 2004.
  21. J. S. Oh, A. I. Isayev and E. von Meerwall, “Molecular Mobility in Ultrasonically Devulcanized Unfilled Butadiene Rubber”, Rubber Chem. Technol., 77, 4, 745-758, 2004.
  22. C. T. Li, A. I. Isayev and R. L. Warley, “Simulation and Experimental Studies of Interface Development and Penetration in Multi-component Transfer Molding of Rubber Compounds”, Rubber Chem. Technol., 77, 5, 873-890, 2004.
  23. W. Feng, A. I. Isayev and E. D. von Meerwall, “Molecular Mobility in Ultrasonically Treated Butyl Gum and Devulcanized Butyl Rubber”, Polymer, 45, 25, 8459-8467, 2004.

2005

  1. K. H. Kim, A. I. Isayev and K. H. Kwon, “Flow-induced Crystallization in Injection Molding of Polymers: Thermodynamic Approach”, J. Appl. Polym. Sci., 95, 3, 502-523 (2005).
  2. W. Feng and A. I. Isayev, “High Power Ultrasonic Treatment of Butyl Rubber Gum: Structure and Properties”, J. Polym. Sci., Phys. Ed., 43, 334-344 (2005).
  3. W. Feng and A. I. Isayev, “Blends of Ultrasonically Devulcanized Tire-Curing Bladder and Butyl Rubber”, J. Materials Science, 40, 2883-2889 (2005).
  4. Sayata Ghose and A. I. Isayev, “Ultrasonic Devulcanization of Unfilled Polyurethane Rubber Using Coaxial and Grooved Barrel Reactors: A Compartive Study”, J. Polym. Eng., 25 , No.4, 331-343 (2005).
  5. K. H. Kim, A. I. Isayev, K. Kwon and C van Sweden, “Modeling and Experimental Study of Birefringence in Injection Molding of Semicrystallline Polymers”, Polymer, 46, 12, 4183-4203 (2005).
  6. K. Kwon, A. I. Isayev and K. H. Kim, “Toward a Viscoelastic Modelling of Anisotropic Shrinkage in Injection Molding of Amorphous Polymers”, J. Appl. Polym. Sci., 98, 5, 2300-2313 (2005).
  7. A. I. Isayev, S. H. Kim and W. Feng, “Continuous Ultrasonic Treatment of Uncured and Sulfur-Cured SBR: Effect of Styrene Content”, Rubber Chem. Technol., 78., no. 4 (2005).
  8. W. Feng and A. I. Isayev, “Recycling of Tire-Curing Bladder by Ultrasonic Devulcanization”, Polym. Eng. Sci. (accepted).
  9. S. Lapshin and A. I. Isayev, “Continuous Process for Melt Intercalation of PP-Clay Nanocomposites with Aid of Power Ultrasound”, J. Vinyl Additive Technol. (accepted)
  10. J. Yun and A. I. Isayev, “The Effect of High Power Ultrasound on Ethylene Propylene Diene Monomer (EPDM) Gum in Extrusion Process”, J. Appl. Polym. Sci. (accepted Sept. 26)
  11. Keehae Kwon, A. I. Isayev, K. H. Kim and C. van Sweden, “Theoretical and Experimental Studies of Anisotropic Shrinkage in Injection Molding of Semicrystalline Polymers”, Polym. Eng. Sci. (accepted).

The University of Akron

Akron, OH 44325
Phone: 330-972-7111
Contact us
Send mail & deliveries to UA
Text-Only