Click here to return to the DPE Alumni Page. Click on the column headings below to sort the table. Hit CTRL+F to search for a specific alumni or dissertation.
| Last Name | First Name | Degree | Year | Thesis/Dissertation |
|---|---|---|---|---|
| Acharya | Sunil | Ph.D. | 2005 | Micromechanics of Asperity Interaction in Wear - A Numerical Approach |
| Adames | Juan | Ph.D. | 2007 | Characterization of Polymeric Binders for Metal Injection Molding (MIM) Process |
| Adebayo | Gbolarumi | Ph.D. | 2001 | Design, Validation and Implementation of On-Line Measurement Techniques to Study the Phase Behavior of Partially Miscible PMMA/PaMSAN Blends Under Quiescent and Flow Conditions, and Application to Filled-PVC in Quiescent Mode |
| Adewale | Ajayi | Ph.D. | 1993 | Experimental and Theoretical Isothermal Flow Studies in Modular Intermeshing Counter-Rotating Twin Screw Extruders |
| Adewale | Kolapo | Ph.D. | 1996 | Modeling of Melt Flow Instabilities of High Molecular Weight Polymer with Narrow Molecular Weight Distribution |
| Adwani | Sunil | M.S. | 2003 | The Use of Excimer Laser Evaluation of Processing Effects in Injection Molded PS and PC |
| Agarwal | Sheel | M.S. | 2000 | Development and Application of Lambourn Type Abrasion Tester on NR and SBR Blends |
| Ahmad Nazir | Nadzrinahamin | Ph.D. | 2011 | Modification and Characterization of Nafion Perfluorinated Ionomer Membrane for Polymer Electrolyte Fuel Cells |
| Ahn | Dae Up | Ph.D. | 2007 | Well-Aligned 3-Dimensional Self-Assembly in Block Copolymers and Their Nanotechnological Applications |
| Ahn | Sungtae | Ph.D. | 2003 | The Influence of Additives and Additive Migration on Rheological Properties and Processing of Polymer Melt Compounds |
| Ahn | Yongjin | M.S. | 1994 | Wear of Slipping Wheels |
| Al-Munif | Munif Hamad | M.S. | 2003 | Enhancement of Mechanical Properties of Polyethylene Terephthalate Via In-Situ Compatibilization Process with Linear Low Density Polyethylene Modified with Glycidyl Methacrylate and Organic Clay |
| Alyamac | Elif | Ph.D. | 2009 | Self-Stratifying Coatings |
| Al-Yamani | Faisal | M.S. | 2005 | A Route to Enhanced Intercalation in Rubber Silicate Nanocomposites |
| Ammar | Ali | M.S. | 2012 | The Morphology and Mechanical Properties of Polysulfone/Polyimide Nanocomposite Films |
| Asiri | Abdulaziz | M.S. | 2003 | A Novel Economical Method to Improve the Toughness of Carbon/Epoxy Long Fiber Components by the Integration of Carbon/Epoxy Tow Loops Core |
| Aussawasathien | Darunee | Ph.D. | 2006 | Electrospun Conducting Nanofiber-Based Materials and Their Characterizations: Effects of Fiber Characteristics on Properties and Applications |
| Ayrom Keuchel | Haleh | Ph.D. | 1997 | Development of Spatial Structural Hierarchy in Injection Molded Isotactic Polypropylene |
| Ayyer | Ravishankar | M.S. | 2003 | Rheology of Polyamide-6/Montmorillonite Based Silicate Polymer/Layered Nanocomposites |
| Azari | Arsalan | M.S. | 1988 | Shear-Free Squeezing Flow of Polymer Melts - Equibiaxial Stretching |
| Azmoudeh | Mohammad | M.S. | 1992 | Synergistic Processing Strategies in Forging of Polymer-Metal Powder Mixtures |
| Babrowicz | Robert | M.S. | 1989 | The Effect of Polystyrene Domain Structure on the Rheological Behavior and Adhesive Performance in a Styrene-Isoprene-Styrene Pressure Sensitive Adhesive |
| Baena | Johanna | Ph.D. | 2006 | Processing and Kinetic Studies of the Reactive Blends of Poly(vinylchloride) and Thermoplastic Polyurethanes |
| Bahl | Kushal | M.S. | 2010 | Optimum Process Conditions for Production of Thermally Conductive Polymer Compounds Using Boron Nitride |
| Bai | Lan | M.S. | 2001 | The Effects of Filler Volume Fraction and Film Thickness on Resistivity of Conductive Adhesives |
| Bajpai | Vardhan | Ph.D. | 2005 | Syntheses, Characterization and Applications of Micro-/Nano-Structured Conducting Polymers and Carbon Nanotubes |
| Ban | Kyun Ha | Ph.D. | 2008 | Mechanism and Significance of Slip and New Mixing Elements During Flow in Modular Intermeshing Co-Rotating Twin Screw Extruders |
| Bandyopadhyay | Diya | Ph.D. | 2012 | Controlling Polymer Thin Film Instabilities via Tuning of Polymer-Substrate Interactions and Suppression of Capillary Waves |
| Bang | Dae-Suk | Ph.D. | 1996 | Theoretical and Experimental Flow Studies in Modular Tangential Counter-Rotating Twin Screw Extruders |
| Bas | Serkan | Ph.D. | 2009 | Synthesis of Hybrid Latexes and Polymerization Kinetics of Functional Latexes |
| Bawiskar | Santosh | M.S. | 1992 | Simulation of Heat Transfer: Warpage and Residual Stresses in Rotational Molding |
| Bawiskar | Santosh | Ph.D. | 1997 | Experimental and Theoretical Investigation of Solids Conveying, Melting and Global Behavior in Self Wiping Co-Rotating Twin Screw Extruders |
| Beers | Adam | M.S. | 1999 | Deformation Behavior and Structural Development of Polyethylene Naphthalate/Polycarbonate Blends |
| Belatreche | Mehdi Jean | M.S. | 2002 | A Theoretical and Experimental Study of Liquid Crystalline Polymers |
| Beltran Osuna | Angela | M.S. | 2011 | Evaluation of Antifouling Materials Based on Silica Gels |
| Benes | Michal | M.S. | 2002 | Improved Properties of Short Fiber Rubber Composites through Nanoscale Co-reinforcement |
| Bhuva | Nihir | M.S. | 2003 | Polymer Blends Comprising Nano-Clay for Enhanced Permeation Barrier in Packaging Applications |
| Bicakci Jenkins | Sirarpi | Ph.D. | 2000 | Miscibility, Uniaxial Deformation Behavior and Annealing Studies in Binary and Ternary Blends of Poly(ethylene naphthalate), Poly(ether imide), and Poly(ether ether ketone) |
| Birman | Vyacheslav | Ph.D. | 1999 | Studies of High Deborah Number Flows of Polymer in Channels and Pipes |
| Boles | David | M.S. | 1994 | The Effect of Mold Cavity Geometry on Orientation Development in Injection Molding of Thermotropic Liquid Crystalline Polymers |
| Bora | Sunil | M.S. | 1992 | Development of a Device for Obtaining Uniform Thickness in Thermoforming of Barrier Materials |
| Brenno | Steve | M.S. | 2004 | A Process Route to the Synthesis of Polymer Matrix Nanocomposites with Mixed-Geometry Inclusions |
| Buddhiranon | Sasiwimon | Ph.D. | 2012 | Phytochemical Modification of Biodegradable/Biocompatible Polymer Blends with Improved Immunological Responses |
| Bumm | Sug Hun | Ph.D. | 2010 | Mixing Studies and Simulation of Compounding Chopped Fiber and Silica Filler into Thermoplastics in a Modular Co-Rotating Twin Screw Extruder |
| Cai | Feng | M.S. | 1992 | Rubber Modified Copolyester Thermoplastic Elastomer |
| Cano | Camilo | Ph.D. | 2005 | Polyimide Microstructures from Powdered Precursors: Phenomenological and Parametric Studies on Particle Inflation |
| Cao | Du | M.S. | 1995 | A Study of Elastic Recovery of Rubber Vulcanizates Within Very Short Time Intervals for Dynamic Sealing Applications |
| Cao | Feina | Ph.D. | 2008 | Shape Memory Polyurethane Nanocomposites |
| Cao | Yuanmei | Ph.D. | 2012 | Antireflective Polyimide Based Films |
| Cardenas | Salvador | M.S. | 2000 | Effect of Glass Fibers on the Behavior of LCP/PEI Blends |
| Carrillo | Antonio | Ph.D. | 2008 | Residual Stresses and Birefringence in Gas-Assisted Injection Molding of Amorphous Polymers: Simulation and Experiment |
| Catignani | Umberto | M.S. | 1996 | Molecular Weight Effect on Growth, Nucleation, and Crystallization Rates of I-PP and Predictions of Morphology and Crystallization During Quenching |
| Cavak | Murat | M.S. | 1999 | Fatigue Strength Studies in Polyvinyl Chloride Pipe Joints |
| Cha | Jae Hyug | Ph.D. | 2001 | Polymer Modification with Various Monomers in a Batch Mixer and a Twin Screw Extruder: Experiment and Kinetic Modeling |
| Chakraborty | Ruby | Ph.D. | 2008 | Development of Novel Cycloaliphatic Siloxanes for Thermal and UV-Curable Applications |
| Chamulitrat | Sutin | M.S. | 1993 | Dynamic Vulcanization of Thermoplastic Copolyester Elastomer/Nitrile Rubber Blends: Effect of Curing System |
| Chandrasekaran | Neelakandan | Ph.D. | 2010 | Miscibility, Morphology and Biocompatibility Studies of Novel Hemodialysis Membranes with Enhanced Anti-Oxidant and Anti-Inflammatory Properties |
| Chang | Do-Hoon | Ph.D. | 2000 | Comparison of Reactive Extrusion in Different Continuous Mixing Machines |
| Chang | I-Ta | Ph.D. | 2012 | Excimer Laser Ablation of Polymer-Clay Nanocomposites |
| Chang | Ming-Chi | M.S. | 1996 | Miscibility Phase Diagrams of the Mixtures of Side-On Side-Chain Liquid Crystalline Polymers and Low Molar Mass Liquid Crystals |
| Chang | Sukky | Ph.D. | 1997 | Effect of Chemical Structure on Phase Transition-Rheology-Morphology Relationships in Main-Chain Liquid-Crystalline Polymers |
| Chang | Young-Wook | Ph.D. | 1993 | Internal Fracture of Rubber Blocks |
| Chen | Cheng-Chung | Ph.D. | 1992 | Influence of Compatibilizers on Morphological and Mechanical Properties of Polymer Blends |
| Chen | Chiu-Yen | M.S. | 1993 | Characterization of Phase Morphologies and Mechanical Properties of Blends of Isotactic Polypropylene and Ethylene Propylene Diene Terpolymer |
| Chen | Haifeng | M.S. | 1996 | Fatigue Strength Studies in Polyethylene Pipe Joints |
| Chen | Hongyan | M.S. | 2008 | Simulations of Shearing Rheology of Thermotropic Liquid Crystalline Polymers |
| Chen | Jianhua | Ph.D. | 1995 | Isothermal Thickening and Thinning Processes in Low-Molecular-Mass Poly(ethylene oxide) Fractions Crystallized From the Melt |
| Chen | Shide | M.S. | 1991 | Miscibility and Phase Segregation Studies in Poly-p-phenylene Denzobisoxazole/Polyamides Molecular Composites |
| Chidambaram | Anand | M.S. | 1995 | Reactive Blending of Waste Rubber with Thermoplastics |
| Chittavanich | Pongsith | M.S. | 2009 | Pigmented UV-Curable Alkyd |
| Chiu | Fang-Chyou | M.S. | 1991 | Basic Studies of Miscibility and Interdiffusion of Vinyl Chloride Polymers and Poly(e-caprolactone) Blends |
| Chiu | Hao-Wen | M.S. | 1995 | Phase Behavior in Mixtures of Side-Chain Liquid Crystalline Polymers and Low Molar Mass Liquid Crystals |
| Chiu | Hao-Wen | Ph.D. | 1998 | Phase Equilibria and Self-Organizing Behavior of Side-Chain Liquid Crystalline Polymer Mixtures |
| Cho | Jae Whan | Ph.D. | 1998 | Development of Phase Morphology in Blending for Modular Co-rotating and Counter-Rotating Twin Screw Extruders |
| Cho | Myung Ho | Ph.D. | 1991 | Structure Development and Deformation Mechanism During Biaxial Stretching of Gelation Crystallized Ultrahigh Molecular Weight Polyethylene Films |
| Choi | Cheol-Ho | Ph.D. | 2000 | Comparative Study of Structure Development in Melt Processing (polyethylene and isotactic polyolefins: polypropylene, polybutylene and poly-4-methylpentene-1) |
| Choi | Dongman | Ph.D. | 2002 | Structure Development of Polypropylenes of Varying Stereo Forms and Tacticity in Melt Spinning, Tubular Blown Film Extrusion and Injection Molding |
| Choi | Jae Hyuck | M.S. | 1999 | Synthesis of Side Chain Liquid Crystalline Polymer and Phase Separation Behavior and Phase Morphology of LCP/K-21 Mixtures |
| Choi | Jonghan | Ph.D. | 2001 | A Study of Structure Evolution During Deformation and Subsequent Heat-Setting Process in Poly(ethylene terephthalate) and Poly(ether imide) Binary Miscible Blends |
| Choi | Kyungwoo | Ph.D. | 2001 | Processing and Characterization of a Petroleum Isotropic Pitch, a Synthetic Mesophase Pitch, and their Blends for the Preparation of Carbon Fibers and Moldings |
| Choi | Soobum | Ph.D. | 2003 | Rheology, Phase Transition and Morphology of ABA-Type and ABC-Type Triblock Copolymers |
| Chu | Lih-Long | M.S. | 1991 | Experiments and Analysis of Polymerization of Methyl Methacrylate in a Model Twin-Screw Extruder |
| Chu | Lih-Long | Ph.D. | 1995 | Flow Analysis of Polymerization in a Model Twin Screw Extruder |
| Chu | Ming-Hou | M.S. | 1990 | Deformation Behavior and Dynamic Filler-Rubber Interaction of Poly(ethyl Acrylate) and Filled Compounds |
| Chun | Hyunaee | Ph.D. | 1997 | Effect of Molecular Characteristics on Strength of Elastomer |
| Chun | Seung Bum | Ph.D. | 1999 | Morphology of Ternary Polymer Blends Containing a Block Copolymer as Compatibilizing Agent |
| Chung | Oansuk | Ph.D. | 1998 | The Effects of Polymer Selection and Dynamic Vulcanization on the Morphology and Properties of Rubber/Plastic Blends |
| Churdpunt Ruksakulpiwat | Yupaporn | Ph.D. | 1999 | Quiescent and Shear-Induced Crystallization of Ziegler-Natta and Metallocene Based Isotactic Polypropylenes |
| Costantino | Gregory | M.S. | 1995 | Thermal and Pressure Buildup During the Abrasion of Elastomers |
| Cronin | Steven | M.S. | 1998 | The Effect of Composition and Processing Conditions on the Structure Development in Injection Molded Dynamically Vulcanized PP/EPDM Blends |
| Dariush | Bahman | M.S. | 1995 | Effect of Fillers on Spin Welding of Polypropylene |
| Das | Pritam | M.S. | 2004 | Internet Controlled Thermoplastic Impregnation of Glass Roving with Pultrusion |
| Dayal | Pratyush | Ph.D. | 2007 | Dynamics and Morphology Development in Electrospinning of Polymer Solutions |
| Demiray | Mehmet | M.S. | 1996 | Effect of Processing Conditions on Crystallinity and Microstructure of Injection Moldings of Polypropylenes of Various Molecular Weights |
| Deng | Jone-Shin | Ph.D. | 1990 | Basic Study of Injection Molding of Rubber Compounds |
| Deshpande | Swati | M.S. | 2000 | Rheological Modeling of Silica Filled SBR |
| Dharaiya | Dhawal | M.S. | 2002 | Studies on Ternary Blends of Polybutylene Terephthalate and Polyamide 6 with Phenoxy Resins |
| Dharaiya | Dhawal | Ph.D. | 2006 | Effects of Nanoclay and Conductive Carbon Black on Morphology Development in Chaotic Mixing of Immiscible Polymers |
| Diao | Bing | M.S. | 1997 | Basic Study of Continuous Ultrasonic Devulcanization of Unfilled Silicone Rubber |
| Ding | Ran | M.S. | 1994 | Self-Reinforced Prepregs, Laminates and Injection Moldings of LCP/LCP Blends |
| Ding | Ran | Ph.D. | 1997 | Chemorheology of Filled Rubber Compounds |
| Dirama | Taner | M.S. | 2002 | Processing Behavior of Layered Silicate Nanocomposites in Film Blowing |
| Doni | Shashishekhar | M.S. | 2001 | Shear-Induced Migration of Particles in Filled Polymers : Effects on Conductivity and Mechanical Properties |
| Du | Ling | Ph.D. | 2008 | Highly Conductive Epoxy/Graphite Polymer Composite Bipolar Plates in Proton Exchange Membrane (PEM) Fuel Cells |
| Duan | Yannan | Ph.D. | 2012 | Fundamental Studies on Polymer and Organic-Inorganic Hybrid Nanoparticles Reinforced Silica Aerogels |
| Duran | Hatice | Ph.D. | 2004 | Anisotropical Patterned Photopolymerization-Induced Phase Separation of Self-Assembled Nano-Composites with Liquid Crystals and Multi Functional Monomers |
| Dworak | David | Ph.D. | 2005 | Synthesis, Characterization, and Evaluation of Cycloaliphatic Substituted Silane Monomers and Polysiloxanes for Photo-Curable Aerospace Coatings |
| Dziczkowski | Jamie | Ph.D. | 2008 | Advances in Acrylic-Alkyd Hybrid Synthesis and Characterization |
| Dzienis Drum | Krystle | M.S. | 2010 | Mechano-optical Behavior and Structure Development in Nylon MXD6 Films Biaxially Stretched and the Effect on Oxygen Permeability Properties |
| Ebner | Karl | M.S. | 1992 | An Experimental Investigation of Polypropylene Degradation in Different Processing Machines |
| Echeverri | Mauricio | Ph.D. | 2012 | Phase Diagram Approach to Fabricating Electro-Active Flexible Films: Highly Conductive, Stretchable Polymeric Solid Electrolytes and Cholesteric Liquid Crystal Flexible Displays |
| Erden | Numan | M.S. | 2009 | Polyurethane-Polybenzoxazine Based Shape Memory Polymers |
| Ertekin | Ayca | Ph.D. | 2008 | Analysis of Wetting, Flow and Final Properties of Resin Transfer Molded Epoxy-Glass Fiber Composites Enriched with Nanoscale Reinforcements |
| Extrand | Charles | Ph.D. | 1990 | Surface Studies of Polymers |
| Famili | Navid | Ph.D. | 1991 | Viscoelastic Modeling of Injection Molding of Thermoplastics |
| Fan | Shaobin | Ph.D. | 2000 | Macroscopic Phase Decomposition in Block Copolymers Driven by Thermooxidative Reactions |
| Fan | Xiyun Serene | Ph.D. | 1991 | Rheological Properties and Model for Particle Filled Polymer Melts |
| Feng | Li | Ph.D. | 2012 | Investigation of the Relationships between the Thermodynamic Phase Behavior and Gelation Behavior of a Series of Tripodal Trisamide Compounds |
| Feng | Wenlai | Ph.D. | 2004 | The Reclaiming of Butyl Rubber and In-Situ Compatibilization of Thermoplastic Elastomer by Powerful Ultrasound |
| Festa | Daniel | M.S. | 1993 | The Instrumented Spin Welding of Filled and Unfilled Thermotropic Liquid Crystalline Polymer |
| Fiorentini | Francesca | Ph.D. | 2004 | Fundamentals of Structuring During Mixing and Deformation of Rubber Compounds Studied by Real Time Sensing Techniques |
| Fong | Dinghuei | M.S. | 2005 | Finite Element Analysis of Compressive Stress Relaxation in Ethylene/Acrylic Elastomer |
| Fong | Yat-Pui | M.S. | 1999 | Evaluation of Phase Morphology and Dispersion of Polymer Blends with Ultrasound Waves |
| Fotoohi-Ghiam | Farid | M.S. | 1990 | Injection Molding of Polymer Blends |
| Fu | Yao-Tsung | Ph.D. | 2011 | Molecular Simulation of Dispersion and Mechanical Stability of Organically Modified Layered Silicates in Polymer Matrices |
| Fujiyama-Novak | Jane | Ph.D. | 2009 | The Rolel of Nanoclay on the Deformation Behavior of Polypropylene/Maleic Anhydride Modified Polypropylene Films and Fibers in Full and Partially Molten State Processing |
| Gagov | Atanas | Ph.D. | 2007 | Instabilities in Elongation Flows of Polymers at High Deborah Numbers |
| Gaikwad | Sanjeev | M.S. | 1994 | A Study of Dynamic Vulcanization of Polycarbonate and Fluoroelastomer Blends |
| Galle | Fred | M.S. | 1997 | Experimental Study of Flow Mechanisms and Mixing in a Kobe Steel Nex-t Continuous Mixer |
| Garcia-Ramirez | Rafael | M.S. | 1991 | The Effect of a Mobile Boundary on the Extrusion of Polymers |
| Garza-Lopez | Tito | M.S. | 2000 | Ablation and Adhesion Behavior Evaluation of Polypropylene Backed Pressure Sensitive Adhesive Tapes Using the Excimer Laser |
| Gautam | Keshav | M.S. | 1999 | Optoelectronic Studies on Novel Conjugate Polymer Systems |
| Gerrard | David | Ph.D. | 2000 | Dynamic and Kinematic Effects in the Friction and Wear of Rubber |
| Getzie | Travis | Ph.D. | 2012 | Magneto-Optical and Rheological Behaviors of Oil-Based Ferrofluids and Magnetorheological Fluids |
| Ghanem | Mahmoud | M.S. | 2004 | The Effect of Processing Conditions on the Structural Gradients Developed in Injection Molded Bacterial Poly (3Hydroxy Butyrate-Co-3Hydroxy Valerate) Parts |
| Ghose Belcher | Sayata | Ph.D. | 2004 | Recycling of Polyurethane Rubber and Foam by the Application of High Power Ultrasound |
| Ghosh | Sudip | M.S. | 1994 | Crystallization Behavior and Processing-Structure-Property Relationship in Binary Blends of PPS |
| Gintert | Michael | Ph.D. | 2007 | A Novel Approach to Obtain High Performance Layered Silicate Thermoset Polyimide Matrix Nanocomposites |
| Glogovsky | Todd | M.S. | 1991 | A Model of Stress Softening for a Carbon Filled Rubber |
| Gmerek | Michael | M.S. | 1993 | Shear-Induced Crystallization in Injection Molding of Thermoplastics: Modeling and Experiment |
| Gomatam | Rajesh | Ph.D. | 2002 | Modeling Fatigue Behavior of Electronically Conductive Silver Filled Adhesive |
| Gowrishankar | Sunil | M.S. | 1999 | Stiffness and Vibrational Behavior and Design of Composite Cylindrical Helical Springs Manufactured using Filament Winding |
| Graves | David | M.S. | 1998 | On-Line Measurements of Crystallization of Low Density Polyethylenes Using Integrated Fiber Optic Laser Raman Spectroscopy, Light Depolarization and Small Angle Laser Light Scattering Techniques |
| Gu | Chang-Il | Ph.D. | 2000 | Reactive Blending of Treated Waste Rubber With Polyamides and Their Monomer |
| Guenthner | Andrew | Ph.D. | 2000 | Evaporation-Induced Solidification and Morphology Development in Polymer Fibers and Films |
| Guha | Abhishek | M.S. | 2003 | Synthesis and Characterization of Polypropylene Microfibers Containing Carbon Nanofibers and Single Walled Carbon Nanotubes |
| Guhathakurta | Soma | Ph.D. | 2009 | Anhydrous State Proton and Lithiium Ion Conducting Solid Polymer Electrolytes Based on Sulfonated Bisphenol-a-poly(Arylene Ethers) |
| Gunes | Ibrahim Sedat | Ph.D. | 2009 | Analysis of Shape Memory Properties of Polyurethane Nanocomposites |
| Gunes | Kaan | Ph.D. | 2009 | In-Situ Ultrasonic Compatibilization of Binary Blends of Flexible Chain Polyesters and Wholly Aromatic Liquid Crystalline Polymers |
| Guo | Jiao | Ph.D. | 2010 | Development of Ion Conductive Polymer Gel Electrolytes and Their Electrochemical and Electromechanical Behavior Studies |
| Guo | Xiaoping | Ph.D. | 1999 | Crystallization, Microstructure, Residual Stresses and Birefringence in Injection Molding of Semicrystalline Polymer: Simulation and Experiment |
| Ha | Seung-Kyu | M.S. | 1997 | Continuous Polymerization and Copolymerization of Lauryl Lactam in a Modular Intermeshing Corotating Twin Screw Extruder |
| Halthore | Ramprasad | M.S. | 1999 | Study on the Effect of Pigments on Mechanical Properties of Injection Molded Polypropylene |
| Han | Min | M.S. | 1990 | Wall Slip of Rubber and Rubber Compounds: Influence of Materials of Construction and Additives |
| Han | Peter | M.S. | 1991 | A Fundamental Study of the Rheology and Mold Filling of Sheet Molding Compounds |
| Han | Peter | Ph.D. | 1995 | A Basic Study of the Rheological Properties of Structurally-Complex Polymer Systems Including Thermoplastic Elastomers |
| Hassan | Mohamed | Ph.D. | 2004 | Novel True Stress-True Strain-Birefringence Measurement Systems for Real Time Measurement During Biaxial Stretching and Heat Setting Polymer Films "Application on PET Films |
| Havet | Guy | Ph.D. | 2000 | Experimental Investigation and Modeling of the Rheology of Silica-Polystyrene Mixtures |
| He | Chunxia | M.S. | 1999 | Studies of Flows of Polyisobutylene in Long Circular and Square Dies |
| He | Fang | M.S. | 1997 | Fatigue and Stress Relaxation Behavior of High-Density Polyethylene |
| He | Lijuan | M.S. | 1997 | Viscoelastic Behavior of Narrow Molecular Weight Distributed Polybutadienes |
| Hill Marko | Meagan | M.S. | 2005 | Adding Value to Recycled Polyethylene Through the Addition of Multi-Scale Reinforcements |
| Hindi | Majid | Ph.D. | 1989 | Mechanochemical Fatigue and Heat Build-Up in Elastomers |
| Hindi | Rick | M.S. | 2001 | Thermomechanical Analysis of a 2 Ply Composite Laminate Test: Investigation of Damage Evolution from Socketing to Bridging |
| Hinojosa-Falcon | Luis | M.S. | 2003 | Plasticization and Stabilization Effects on the Mechanical and Thermal Properties of Plasticized PVC Nanocomposites |
| Hong | Chang Kook | Ph.D. | 2001 | The Application of Powerful Ultrasound to Devulcanization of Rubbers and Compatibilization of Polymer Blends |
| Hong | Chang Min | Ph.D. | 2005 | Investigation of Shear-Induced Migration of Filler Particles in Molding Flows |
| Hong | Myeong-Ho | Ph.D. | 2004 | Structure Development of Cyclopolyolefins and Polystyrenes in Melt Spinning and Film Stretching Process |
| Hong | Myung-Hyuk | Ph.D. | 1997 | Theoretical and Experimental Studies in Modular Intermeshing Counter-Rotating Twin Screw Extruders |
| Howard | Faith | M.S. | 2001 | Reactive Dispersion of Waste Ground Rubber With Polyolefin |
| Hsiung | Chang-Meng | Ph.D. | 1990 | Processing-Structure-Property Relationship and Simulation of Structure Gradients in Injection Molding of Semi-Crystalline Aromatic Polycondensates |
| Hu | Benfei | M.S. | 1992 | Theoretical and Experimental Study of Internal Mixers |
| Hu | Peng | M.S. | 1996 | Racheting of Polyethylene Pipe |
| Huang | Tsang-Min | Ph.D. | 2010 | Phase Equilibria of Mesophase Transitions in Binary Liquid Crystal Mixtures Involving Induced Ordered Phases |
| Huang | Wenyi | Ph.D. | 2006 | Synthesis, Characterization and Rheology of Functional and Heterocyclic Liquid-Crystalline Polymers |
| Huang | Yeong-Hua | Ph.D. | 1991 | One- and Two-Dimensional Channel Flow of a Viscoelastic Plastic Material: Simulation and Experimentation |
| Huang | Yiyun | M.S. | 1995 | Self-Reinforced Prepregs, Laminates and Injection Moldings of HDPE/LCP Blends |
| Huarng | Jyh-Chiarng | M.S. | 1987 | Miscibility and Morphology Studies for Ternary Blends |
| Ihm | Dong Joon | Ph.D. | 1994 | Compatibilization, Morphology and Mechanical Properties of Polyethylene Terephthalate/Polyethylene Blends |
| Isayeva | Irada | M.S. | 1997 | Studies of Miscibility, Crystallization and Structure-Property Relation of Blends of Two Semicrystalline Polymers: Poly(vinylidene fluoride) and Poly(1.4-butylene adipate) |
| Iskander | Suzette | M.S. | 1994 | Blends of Copolyester Thermoplastic Elastomer with Nitrile Rubber |
| Jain | Sachin | M.S. | 2000 | Nanocomposites of High Performance Thermoplastic Polymers Using Epoxy as Processing Aid |
| Jarukumjorn | Kasama | Ph.D. | 1999 | On-Line Monitoring of Grafting Monomers onto Low Density Polyethylene in a Model Twin Screw Extruder by Fiber Optic Raman Spectroscopy |
| Jenkins | John | M.S. | 2007 | Ultrasonic Decrosslinking of Crosslinked Polyethylene |
| Jeong | Jae-Hyeuk | Ph.D. | 2003 | A Study of Complex Channel Flows of Polymer Melts |
| Jeung | Soondeuk | Ph.D. | 2005 | The Studies of Polyurethane and Polyethylene Oxide Electrolites with Various Salts |
| Jha | Kshitij | Ph.D. | 2012 | Polarization and Self-Assembly at Metal-Organic Interfaces: Models and Molecular-Level Processes |
| Jiang | Qibo | Ph.D. | 2008 | Modeling Flow, Melting, Solids Conveying and Global Behavior in Modular Intermeshing Counter-Rotating Twin Screw Extruders |
| Jimenez | Guillermo | Ph.D. | 2007 | Characterization of PMMA and TPU Carbon Nanofiber Composites Produced by Chaotic Mixing |
| Joshi | Prashant | Ph.D. | 1999 | Viscoelastic Modeling of Filled, Crosslinked Rubbers |
| Jung | Chang Do | Ph.D. | 2005 | Synthesis of Thermoplastic Polyurethanes and Polyurethane Nanocomposites Under Chaotic Mixing Conditions |
| Jung | Ho-Chul | Ph.D. | 2004 | Investigation of Melting in Modular Intermeshing Co-Rotating Twin Extruder |
| Kadota | Masanori | M.S. | 1997 | The Evolution of Structural Hierarchy in Co-Injection Molded Polystyrene Polypropylene Polymer Pairs |
| Kaewpanya Magaraphan | Rathanawan | M.S. | 1993 | Adhesion of High Density Polyethylene and Polypropylene |
| Kalan | Steven | M.S. | 2011 | Surface Modification of Silicon Through Thermal Annealing and Rinsing of Solvent Cast Polystyrene Films |
| Kalkan | Zehra | Ph.D. | 2006 | Generation of Advanced Polyamide-6,6 Nanocomposites via Interfacial Polycondensation |
| Kalvani | Bimal | M.S. | 1991 | An Investigaton of EMI Shielding Composites Made By Incorporating Low-Melting Point Metals into Thermoplastics |
| Kamruzzaman | Mohammad | M.S. | 2003 | An Investigation of Harmonic Properties of Carbon Nanotubes and Their Hexagonal Arrays |
| Kang | Ho-Jong | Ph.D. | 1989 | Structure Development and Dynamics in Double Bubble Tubular Film Processing |
| Kanuga | Karnav | Ph.D. | 2006 | A Fundamental Study on the Non-Linear Mechano-Optical Behavior of Polyethylene Naphthalate, Its Blends with Polyetherimide and its Nanocomposites |
| Karmarkar | Uday | M.S. | 2000 | Mechanical Adhesion Analysis of Multi-Stepped Double Scarf Joints with Void and Disbond Effects |
| Ke | Linping | Ph.D. | 2010 | Dispersion Characteristics of Nanocomposites Based on Functionalized Block Copolymers |
| Keawwattana | Wirunya | Ph.D. | 2002 | Phase Behavior, Crystallization and Morphological Development in Blends of Polypropylene (PP) Isomers and Poly (Ethylene-Octene) Copolymer |
| Keuchel | Kenneth | M.S. | 1994 | Instrumented Spin Welding of Polypropylene |
| Keum | Jongmin | Ph.D. | 2004 | Engineering Analysis of Devolatilization and Reactive Processing |
| Khanolkar | Amit | M.S. | 2000 | Effect of Interfacial Weight Loss by Silver Migration on the Pull-Out Strength of Silver Wire Embedded in an Adhesive Matrix |
| Kiehl | Christopher | M.S. | 1992 | Nondestructive In-Line Monitoring of the Polymerization of Methyl Methacrylate with Ultrasound |
| Kim | Byong-Jun | Ph.D. | 2002 | Reactive Extrusion of E-Caprolactone Polymers and Application of Poly(Lauryl-B-Caprolactone) as a Compatibilizing Agent in Blends Containing Poly(Vinyl Chloride) |
| Kim | Byoungjoo | Ph.D. | 1996 | Studies of Thermal/Peroxide Induced Degradation and Maleation of Polypropylene in a Modular Intermeshing Twin Screw Extruder |
| Kim | Do | Ph.D. | 2003 | Phase Equilibria and Dynamics of Thermally Induced and Polymerization-Induced Phase Separations in Main-Chain Liquid Crystalline Polymer Mixtures |
| Kim | Dong-Ok | Ph.D. | 2000 | Effect of Pendent Side Groups on the Rheology, Mesophase Structure, Molecular Packing, and Conformational Properties of Thermotropic Liquid-Crystalline Polymers |
| Kim | Eung Gun | M.S. | 1991 | Plastic Effects in Peeling Polyethylene Films |
| Kim | Eung Kyu | Ph.D. | 2000 | Investigation of Transient Flow and Element Analysis in Modular Intermeshing Co-Rotating Twin Screw Extruders |
| Kim | Hyunjung | M.S. | 1997 | Mechanical Behavior and Adhesion of Block Copolymer/Polystyrene Pairs |
| Kim | In | Ph.D. | 2004 | Development of New Generation of Copolymers via Reactive Extrusion in a Twin Screw Extruder and Application in Various PVC Blends |
| Kim | Jeong-Cheol | Ph.D. | 1995 | The Influence of Processing History on Structural Characteristics of Poly(ethylene 2,6 naphthalene dicarboxylate) and Poly(ether imide) Blends |
| Kim | Jin Kuk | Ph.D. | 1990 | Analysis of Flow and Mixing in an Internal Mixer with Different Rotor Designs |
| Kim | Jongdae | Ph.D. | 2004 | A Study of Structure Formation on PET, PBT, and PS Surfaces by Excimer Laser Ablation |
| Kim | Kwang-Jea | Ph.D. | 1998 | Rheology, Processing, and Characterization of Isotropic, Anisotropic, and Mixed Particle Filled Polymer System |
| Kim | Kyuk Hyun | Ph.D. | 2004 | Flow Induced Crystallization and Birefringence Development of Semicrystalline Polymers in Injection Molding and Fiber Spinning Process |
| Kim | Myung Hwan | Ph.D. | 1990 | Theoretical and Experimental Studies of Flow Behavior in Modular Non-Intermeshing Counter-Rotating Twin Screw Extruders |
| Kim | Nam Hyung | Ph.D. | 2009 | Injection-Compression and Co-Injection Moldings of Amorphous Polymers: Viscoelastic Simulation and Experiment |
| Kim | Namil | Ph.D. | 2010 | Photoisomerization- and Photopolymerization-induced Phase Trnasitions in Mixtures of Photoresponsive Chromophores and Reactive Mesogens |
| Kim | Pan Jong | Ph.D. | 1993 | Flow Visualization and Study of Chemical Reactions in a Modular Intermeshing Co-Rotating Twin Screw Extruder |
| Kim | Pan Soo | Ph.D. | 1996 | Flow and Mixing Characteristics in an Intermeshing Counter-Rotating Rotor Internal Mixer |
| Kim | Seok-Ho | Ph.D. | 1998 | Continuous Ultrasonic Devulcanization of Sulfur Cured SBR Vulcanizates |
| Kim | Won-Ho | Ph.D. | 1992 | Local Deformation of Rubber Seals |
| Kim | Won-Kook | M.S. | 1993 | Phase Behavior and Dynamics of Phase Separation in a Mixture of Polystyrene and Liquid Crystal |
| Kim | Younghoon | Ph.D. | 2004 | A Study of Polymer/Clay Nanocomposite Formation by Melt-Intercalation Process |
| Ko | Che-Chian | Ph.D. | 1994 | Phase Separation and Chemical Reactions in Blends of Polycarbonate with Polymethyl Methacrylate Isomers |
| Ko | Dong-Hwi | M.S. | 1991 | Enhancement of Electrical Properities of Uniaxially and Biaxially Processed Poly-p-phenylene Sulfide Film |
| Kochar | Lalit Singh | M.S. | 1986 | High Pressure Vulcanization of Elastomers |
| Konishi | Yuma | M.S. | 2004 | Nanoparticle Induced Carbon Black Network Self-Assembly and Structural Hierarchy Development in Injection-Molded Conductive Composites |
| Koombhongse | Piyawit | Ph.D. | 2001 | Phase Behavior and Morphology of SAN/PMMA Under High Flow Rates |
| Kothari Suri | Shipra | M.S. | 2000 | Vulcanization Induced Phase Separation in Blends of Syndiotactic Polypropylene and Metallocene Catalysed Ethylene Propylene Diene Terpolymer |
| Kumar | Rishi | Ph.D. | 2010 | Manufacturing of Polymer Nanocomposites Containing Carbon Nanotubes and Carbon Nanofibers Using Ultrasound Assisted Extrusion Process |
| Kumar | Sumeet | M.S. | 1998 | Selective Use of Rubber Toughening to Optimize Lap Joint Strength |
| Kuttappa | Sanjay | M.S. | 1994 | Static and Dynamic Characteristics of Rubber Compounds |
| Kuznicki | Jason | M.S. | 2005 | Water Uptake and Fracture Behavior of Epoxy/Clay Nanocomposites Used for Bonding Granite |
| Kwa | Teik Lim | M.S. | 2006 | Development of On-Line True Stress-Strain-Electrical Conductivity Uniaxial Tensile Stretching Measurement System & its Utility in Thermo-Mechano-Electrical Behavior of Carbon Black (CB) Filled PolyLactic Acid (PLA), Binary & its Nanoclay (NC) Ternary Nano |
| Kwak | Seung-Yeop | M.S. | 1989 | PVC-Plasticizer Interaction in Plastisol Processing: Effect of the Homologous Series of Plasticizers on Gelation and Fusion Behavior |
| Kwak | Seung-Yeop | Ph.D. | 1992 | Investigation of Morphology on Progress of Mixing PVC With Different Polymers: Structure and Mechanical Behavior After Mixing |
| Kwon | Keehae | Ph.D. | 2005 | Anisotropic Shrinkage in Injection Moldings of Semicrystalline and Amorphous Polymers: Simulation and Experiment |
| Kwon | Youngdon | Ph.D. | 1994 | Studies of Viscoelastic Constitutive Equations and Some Flow Effects for Concentrated Polymeric Fluids |
| Kye | Hyoungsan | Ph.D. | 1995 | Continuous Polymerization of Caprolactam and Reactive Blending in a Modular Intermeshing Corotating Twin Screw Extruder Integrated with Polyamide Fiber Melt Spinning |
| Lai | Sun-Mou | Ph.D. | 1993 | Effect of Interfacial Bonding on the Strength of Adhesion |
| Lalgudi | Basker | M.S. | 2000 | An Experimental Investigation of Rheology and Chemorheology of Styrene Butadiene Rubber (SBR) and Natural Rubber (NR) |
| Laokijcharoen | Pasaree | Ph.D. | 2000 | The Phase Morphology of Blends of Natural Rubber with Crystalline Hydrocarbon Plastics |
| Lapshin | Sergey | Ph.D. | 2006 | Experimental and Theoretical Study of Polyolefin-Clay Nanocomposites Prepared Using High Power Ultrasound |
| Larentzos Rubino | Evangelia | M.S. | 2000 | The Effect of Ground Silica Fillers on the Processing Properties of Silicone Compounds |
| Lee | Byoung Jo | Ph.D. | 2009 | Nucleating Agent-Assisted Preparation of Polypropylene (PP)/Polyhedral Oligomeric Silsesquioxane (POSS) Nanocomposites and Their Characterization |
| Lee | Byung-Hwa | Ph.D. | 2001 | Experimental and Theoretical Studies of Reactive Extrusion Process in Twin Screw Extruders: Formation of Polycaprolactam and Block Copolymers |
| Lee | Dong Jae | Ph.D. | 1998 | Experimental and Theoretical Study of Sandwich Injection Molding Process |
| Lee | Eon-Seok | Ph.D. | 1997 | Influence of Fluoropolymers on the Extrusion Characteristics of Thermoplasltic Melts |
| Lee | Hak-Soo | Ph.D. | 1991 | Thermodynamics and Kinetics of Phase Separation in Functional Prepolymer Mixtures and Networks |
| Lee | Jaehyung | Ph.D. | 1999 | Dynamics of Polymerization Induced Phase Separation in Reactive Polymer Blends |
| Lee | Je-Kyun | Ph.D. | 1998 | Morphology Evolution in Polymer Blend During Compounding and Subsequent Processing |
| Lee | Jeong | Ph.D. | 1991 | Fundamental Properties and Structure Development in Solid State Processed Vinylidene Fluoride/Trifluorethylene Copolymers |
| Lee | Keun Yong | Ph.D. | 2005 | Structure and Properties of Polymer Blend Nanocomposites |
| Lee | Kyung Min | Ph.D. | 2002 | Phase Transition, Rheology, and Morphology of Block Copolymers and Side-Chain Liquid-Crystalline Polymers |
| Lee | Nam Seok | M.S. | 1990 | Miscibility of Blends of CIS-1,4 Polyisoprene-Butadiene-Styrene Copolymers and Polybutadiene |
| Lee | Seung Wook | M.S. | 1992 | Fundamental Studies on Crystallization Kinetics and Necking Behavior of Polyethylene 2,6-Naphthalate |
| Lee | Shi-Ho | Ph.D. | 1996 | Influence of Viscosity Ration on Mixing and Melting of Immiscible Polymer Blends in a Modular Intermeshing Corotating Twin Screw Extruder |
| Lee | Sung-Duk | M.S. | 1989 | Critical Comparison of Methods of Measurement of Carbon Black Dispersion in Rubber Compounds |
| Lewis | Ivor | M.S. | 1992 | Rheological and Process/Mechanical Properties of Estaloc Polyurethane |
| Li | Chengtao | Ph.D. | 2003 | Two Component Co-Injection and Transfer Molding and Gas-Assisted Injection Molding of Polymers: Simulation and Experiment |
| Li | Guo | M.S. | 1995 | Kinetics of Quiescent and Shear-Induced Crystallization: Molecular Weight Effects |
| Li | Hang | M.S. | 1999 | Structure Development in Melt Spinning Filaments and Biaxially Stretched Films from Poly(Butylene Terephthalate) Based TPE's |
| Li | Li Li | M.S. | 1995 | Effects of Particulate Filler Type, Size and Surface Treatment on Rheological Behavior of Filled Rubber Compounds |
| Li | Sinan | Ph.D. | 2007 | Design and Construction of Nanoarchitectural Metal Derivatives-Carbon Nanotype Hybrids |
| Liang | Songxin | M.S. | 1998 | Phase Behavior in Mixtures of Smectic-LC/polymer, Nematic-LC/polymer and Smetic-LC/side-on side-chain Liquid Crystalline Polymer |
| Liang | Yi Cheng | Ph.D. | 2000 | Experimental and Theoretical Study of Self-Reinforced Polypropylene/LCP Blends |
| Lim | Dong-Soo | Ph.D. | 1991 | Miscibility and Dynamic Behavior of Phase Decomposition in Binary Mixtures of Polycarbonate and Poly(methyl Methacrylate) Stereoisomers |
| Lim | Soon-Ho | Ph.D. | 1991 | Particle Orientation Development and Directional Growth Phenomena in Processed Filled Thermoplastic Compounds |
| Lin | Heng | M.S. | 2003 | The Effects of High Intensity Ultrasonic Waves on Polypropylene, Polyamide 6 and Their Blends |
| Lin | Tsui-Hsun | Ph.D. | 2009 | Birefringence, Anisotropic Shrinkage and Luminance in Injection Molded Light-Guide Plate: Modeling and Experiment |
| Liu | Chengjun | M.S. | 2000 | Chemical and Viscoelastic Effects on Electrical Conduction by Emeraldine Salt in Powder and Composite Adhesive Forms |
| Liu | Dan | M.S. | 2000 | Mixing Silica and Other Fillers into Elastomers in NEX-T Continuous Mixer |
| Liu | Jung-Liang | Ph.D. | 1992 | Does Gel in Nitrile Rubber Affect the Properties of its Blend with Polyvinylchloride? A Fundamental investigation on the Tensile Property, Tear Resistance and Fracture Toughness |
| Liu | Yuqing | Ph.D. | 2011 | Synthesis and Characterization of Well-Defined, Amphiphilic, Ionic Copolymers |
| Lopez-Gonzalez | Francisco | M.S. | 1998 | Rheology, Curing Kinetics and Dielectric Analysis of Polymer Concretes |
| Lu | Hui | M.S. | 2001 | The Influence of Excimer Laser Irradiation on the Morphology, Ablation Rate, Thermal Properties, and Ultrasonic Welding Strength of Thermoplastic Polymers |
| Lu | Weijun | M.S. | 2000 | Extrusion Characterization and Melting Mechanism of Thermoplastic Elastomer and Thermoplastics |
| Luo | Tengli | M.S. | 1997 | Rubber/Plastic Blends Based on Ultrasonically Devulcanized Ground Rubber Tire |
| Lyu | Min-Young | Ph.D. | 1997 | Theoretical and Experimental Studies of a Buss Kneader |
| Madan | Sanjeev | Ph.D. | 1989 | Plastic Deformation and Recovery of Semi-Crystalline Polymers |
| Maffei | Mario | M.S. | 2006 | Characterization of Foaming Phenomena of Polypropylene Filled with Azodicarbonamide and Silica |
| Mahanth | Satishkumar | M.S. | 1993 | Processing-Structure-Property Relationships in Melt Spun Poly (vinylidene flouride)/ Poly(methyl methacrylate) Blends |
| Marquina | Edgar | M.S. | 2010 | Use of Dynamic Mechanical Testing, EACS and SEM Image Analysis to Study the Properties of Polypropylene/Calcium Carbonate Nanocomposites |
| Martins | Carla | Ph.D. | 2004 | Mechano Optical Behavior of PET and PEN Under Linear and Programmed Deformation Rate Profiles |
| Matkar | Rushikesh | Ph.D. | 2007 | Phase Diagrams and Kinetics of Solid-Liquid Phase Transitions in Crystalline Polymer Blends |
| Mehta | Atul | M.S. | 1990 | Self-Reinforced Fiber Composites of PEEK and Thermotropic Liquid Crystalline Polymer |
| Mehta | Rujul | Ph.D. | 2003 | Spatio-Temporal Growth of Polymer Single Crystals, Hedites and Spherulites During Isothermal Crystallization |
| Meksupha | Pawiga | M.S. | 1996 | Miscibility Study of Halogen Flame Retardant Polymer Blends |
| Melnikov | Alexei | Ph.D. | 2010 | Damage and Fatigue in Cross-linked Rubbers |
| Meng | Scott | Ph.D. | 2004 | Phase Equilibria and Morphology Development in Liquid Crystal/Photo-Curable Monomer Mixtures Undergoing Pattern Photo-Polymerization |
| Miller | Kent | Ph.D. | 2012 | Production of Poly(lactic acid) Biodegradable Films and the Introduction of a Novel Initiation Method for Free Radical Polymerization via Magnetic Fields |
| Miller | Ronald | M.S. | 1991 | Polyethyl Acrylate Viscoelastic Characterization, Interaction with Carbon Black, and Heat Aging of Vulcanizates |
| Mishra | Ratan | Ph.D. | 2012 | Simulation of Interfaces in Construction Materials: Tricalcium Silicate, Gypsum, and Organic Modifiers |
| Mitra Aravind | Arpita | M.S. | 2000 | Rheological, Kinetic and Chemorheological Studies of Gum SBR Compound |
| Modic | Michael | M.S. | 1986 | Self-Reinforced Melt Processible Polymer Composites |
| Montes | Sergio | Ph.D. | 1991 | Rheology and Processing of Carbon Black Compounds |
| Moon | Chae-Woo | Ph.D. | 1999 | Kinetic and Rheological Studies of Silica Filled SBR Compounds |
| Mukherjee | Partha | M.S. | 1989 | Phase Transformations in Hydroxypropyl Cellulose |
| Mulligan | Jake | Ph.D. | 2004 | Non-Linear Stress Optical Behavior of Poly L-Lactic Acid and its Nanocomposites During Stretching/Relaxation/Retraction from Amorphous Precursors |
| Nagaraj | Phaniraj | M.S. | 2003 | A Study of the Factors Affecting Performance of Layered Silicate Nanocomposites Using Styrene-Co-Acrylonitrile model Polymer System |
| Nah | Chang-Woon | Ph.D. | 1995 | Wear Mechanisms of Rubber Compounds |
| Nam | Joonhyun | Ph.D. | 1993 | Phase Transitions in a Thermotropic Copolyester and Phase Behavior of its Blends |
| Nanjudiah | Kumar | M.S. | 2003 | Development of Phototonic Crystals Induced by Pattern Photo-Polymerization via Holographic Interface Technique |
| Narayan | Kiran | M.S. | 1998 | A Unified Approach to Mechanical Adhesion by Finite Element Analysis of Straight Sections |
| Nebioglu | Ahmet | Ph.D. | 2006 | Network Formation and Thermo-Mechanical Properties of Photo-Curing Inorganic/Organic Hybrid Coatings |
| Negandhi | Nishant | M.S. | 2003 | The Use of Eximer Laser in Evaluation of Processing Effects in Injection Molded PET and PBT |
| Niemeyer | Matthew | M.S. | 1989 | Processing-Structure-Property Relationships in Cool Rolled PEEK Poly(ether ether Ketone) and PPS Poly(p-phenylene Sulfide) |
| Nirantar | Prasad | M.S. | 2001 | Optimization of Adhesively Bonded Single Lap Joints by Tapering of Adherends |
| Nwabunma | Domasius | M.S. | 1996 | Development of Birefringence-Free Optical Adhesives Via Optical Anisotropy Compensation : Blends of Reactive Copolymer and Homopolymer |
| Nwabunma | Domasius | Ph.D. | 1999 | Photopolymerization-Induced Phase Separation and Morphology Development in Liquid Crystal/Polymer Blends |
| Oh | Jeong-Seok | Ph.D. | 2003 | Applications of Powerful Ultrasound to Thermoplastic Elastomers and Rubbers |
| Okuno | Shigeki | Ph.D. | 1996 | Solvent-Dependent Plateau Modulus and Time-Dependent Dynamic Moduli of Plasticized Polymer Containing Multiple-Branched Molecules |
| Opalko | Robert | M.S. | 2008 | Mechanisms of Nanoparticle Induced Morphology Development in Immiscible Blends of Polypropylene/Polystyrene |
| Osanaiye | Gabriel | Ph.D. | 1994 | On the Rheological Properties of Suspensions, Filled Thermoplastics and Rubber Compounds |
| Oshiro | Tadashi | M.S. | 1999 | Application of the Ginzburg-Landau Theory to Polymer Crystallinization |
| Ou | Xuesong | Ph.D. | 2004 | Structural Mechanisms as Revealed by Real Time Mechano Optical Behavior of Polylactic Acid Films in Uni and Biaxial Deformation and Heat Setting Processes |
| Ou-Udomying | Boonharn | M.S. | 1993 | Development of High-Impact Polyamide Molding Resin, Blend of Nylon-66 with Poly(ethyl acrylate) Rubber |
| Ozisik | Rahmi | M.S. | 1996 | Phase Behavior and Structure Development in Melt Spun PEEK/PEI Blends |
| Ozturk | Ozgu | M.S. | 2004 | Optimization of Thermoplastic Impregnation of Glass Rovings with Pultrusion |
| Panchal | Jatin | M.S. | 1999 | Influence of Composition on Deformation Behavior in Blends of PEEK and PEI |
| Pande | Mumu | M.S. | 1999 | Wear Rate Investigation and Wear Particle Characterization of Silica-Silane and Carbon Black Reinforced Rubber |
| Paramonov | Pavlo | Ph.D. | 2005 | Theoretical Modeling of the Nanostructure Formation in Soft Condensed Matter Using Atomic Force Microscopy |
| Park | Dongkyu | M.S. | 1992 | Single Phase Blends of Bisphenol a Polycarbonate and Poly(Phenyl Methacrylate) |
| Park | Dongsik | Ph.D. | 2008 | Self-Assembled Patterns of Block Copolymer/Homopolymer Blends |
| Park | Ho-Sung | Ph.D. | 1990 | Fundamental Studies on Processing, Characterization & Properties of Poly-p-phenylene Terephthalamide/Polyamides Molecular & Particulate |
| Park | Jong-Hyun | Ph.D. | 2004 | A Study on Nanocomposites of Epoxy-Clay and Epoxy-Clay-Thermoplastic Polymer Systems |
| Park | Soo Jeoung | Ph.D. | 2008 | Photopolymerization-Induced Crystallization in Relation to Solid-Liquid Phase Diagrams of Blends of Poly(Ethylene Oxide)/ Multi-Functional Acrylate Monomers |
| Parnell | Shane | Ph.D. | 2002 | The Reactive Blending of a Thermoplastic Polyurethane In Situ with Poly(Vinyl Chloride) |
| Patel | Kalpesh | M.S. | 1994 | Thermal and Reaction Induced Phase Separation in Thermoset/Thermoplastic Blends |
| Patel Keskar | Nisha | M.S. | 2000 | Reactive Compatibilization of PBT/PPO Blends Using Low Molecular Weight Epoxies |
| Patil | Ajeeta | M.S. | 2004 | Synthesis and Microfabrication of Aligned Carbon Nanotubes |
| Pattanayak | Asim | Ph.D. | 2005 | Clay-Tethered Thermoplastic Polyurethane Nanocomposites by Bulk Polymerization Methods |
| Pedraza | Erika | M.S. | 2006 | A Study of the Effects of Functionality on Certain Aspects of Cross-Linkable Latex Systems |
| Perilla | Jairo | Ph.D. | 2004 | A Study of the Relationship Between the Morphology and Rheology of Immiscible Polymer Blends with Temporal Changes in the Interfacial Area |
| Pitia | Emmanuel | Ph.D. | 2012 | Composite Proton Exchange Membrane Based on Sulfonated Organic Nanoparticles |
| Pratiwada | Chaitanya | M.S. | 2012 | High Fidelity Detection of Defects in Polymer Films Using Surface-Modified Nanoparticles |
| Prieto | Alberto | M.S. | 2001 | Wood Flour Composites of High Temperature Polymers by Reaction Induced Phase Separation |
| Puatrakul | Tithinun | Ph.D. | 2000 | Studies of Ionic Conductivity of Uniaxially Stretched Polymer Electrolytes Films |
| Puttarudraiah | Amrutheswar | M.S. | 2003 | Upgrading Recycled Waste Stream Polyethylene by Modification with Nanoscale Clay Hybrids |
| Rajaraman | Hariharan | M.S. | 1992 | Effect of Fillers on the Spin Welding Behavior of Poly-p-phenylene Sulfide Resins |
| Rajput | Pankaj | M.S. | 2003 | Long Term Migration Effects on the Pull-Out Strength of Silver Wire Embedded in an Adhesive Matrix |
| Ramanujam | Anand | M.S. | 1998 | Phase Behavior and Vulcanization Induced Phase Separation in Blends of Syndiotactic PP and Ethylene Propylene Diene Terpolymer |
| Ramirez-Huerta | Mayela | M.S. | 2004 | Influence of Blend Composition on Structure Development During Uniaxial Stretching of Poly(vinyl chloride)/Poly(e-Caprolactone) |
| Ramirez-Huerta | Mayela | Ph.D. | 2009 | Steric and Anchimeric Effects on the Hydrolysis of Oligoesters and their Influence on End-Use Polyurethane Coatings |
| Randall | Jason | Ph.D. | 2010 | Tailoring Structure Property Relationships and Elastic Phenomenon in Native and Polymer Reinforced Silica Aerogels |
| Rathi | Pankaj | Ph.D. | 2009 | Theoretical Modeling of Morphology Development in Blends of Semicrystalline Polymers Undergoing Photopolymerization |
| Razzaghi-Kashani | Mehdi | M.S. | 1997 | Analytical Simulation of Mechanical Processes of Wear for Rubber Vulcanizates |
| Razzaghi-Kashani | Mehdi | Ph.D. | 2000 | A Numerical Approach Towards Understanding the Mechanism of Fatigue Wear in Tread Vulcanizates During Rolling of Tires |
| Reagan | Michael | M.S. | 2009 | Electric Charging and Nanostructure Formation in Polymeric Films Using Combined Amplitude-Modulated Atomic Force Microscopy Assisted Electrostatic Nanolithography and Electric Force Microscopy |
| Rhee | Sangkeun | Ph.D. | 2000 | Structure Development of Polyamides (=Nylons) in Film Extrusion and Stretching Processes |
| Rottmayer | Christopher | M.S. | 2004 | Optimization of Epoxy Bonding to Granite Based on Fracture Considerations |
| Roy | Sayantan | Ph.D. | 2011 | Polyhedral Oligomeric Silsesquioxane-Sorbitol Non-Covalent Interactions: Effects on the Reinforcement of Isotactic Polypropylene Spun Fibers |
| Sadeghi | Mohammad | M.S. | 1987 | Effect on Plasticizer type on Gelation and Fusion Behavior of Polyvinyl Chloride Plastisol |
| Saldanha Singh | Jeanne | M.S. | 1987 | Phase Separation Phenomena in Polymer Blends: Mechanisms and Controlled Morphology |
| Sanghvi | Mukesh | M.S. | 1991 | Rheology and Instabilities of Extrusion Coating Process |
| Sau | Madhusudan | Ph.D. | 2003 | Morphology Development in Chaotic Mixing of Polymers |
| Scavuzzo | Robert | M.S. | 1993 | Computer Simulation of the Filling and Post Filling Stages of the Injection Molding Cycle of a Rubber Compound |
| Schaal | Stephane | Ph.D. | 2000 | The Study and the Prediction of the Rheology and Processing of Tire Compounds |
| Schaible | Stephen | M.S. | 1992 | Investigations into Instrumented Spin Welding and Vibration Weldin of Poly(vinylidene) Fluoride |
| Schauber | David | M.S. | 2002 | The Behavior of Filament-Wound Carbon Fiber/Epoxy Composite Tubes Under Axial Compression |
| Schmidt | Ryan | M.S. | 2011 | Magnetic Nanoparticle Field Directed Self-Assembly: Magnetic Flux Line Mapping and Block Copolymer Driven Assembly |
| Scobbo | James | M.S. | 1986 | Behavior of Gum Elastomers and Carbon Black-Filled Compounds in Shear and Elongational Deformation: Effect of Gel, Filler and Elastomer Type |
| Scobbo | James | Ph.D. | 1989 | Rheology, Processing and Mechanical Properties of Thermoplastic/Graphite Fiber Composites |
| Seif | Sylvain | Ph.D. | 2009 | Temporally Programmed Stretching of Polymer Films: Influence of Nanoparticles |
| Sen | Taner | Ph.D. | 2003 | Investigation of Dynamics and Structure Development During Uniaxial Stretching of PET Films at Different Molecular Weights Using Fully Automated Spectral Birefringence Technique |
| Serhatkulu | Toprak | Ph.D. | 2000 | Crystallization and Birefringence Studies on Fast Structural Changes Followed by Non-Contact Spectral Birefringence and Raman Spectroscopy Techniques |
| Severe | Geralda | Ph.D. | 1999 | Characterization and Development of New Hydrogenated Acrylonitrile-Butadiene Rubber Blends |
| Shah | Jayesh | M.S. | 1991 | Continuous Filament Reinforced Thermoplastics for Automative Body Panels |
| Shah | Ketan | Ph.D. | 1987 | Characterization of Phase Behavior and Deformation Mechanisms of Polybutadienes, Styrene-Butadiene Copolymers and their Blends |
| Shah | Nipesh | M.S. | 1999 | Study of Interfacial Adhesion and Injection Molding of Liquid Crystalline Polymer Blends |
| Shah | Nirav | M.S. | 2001 | Design and Filament Winding of Composite Shield for Jet Engine Fan Blade Containment |
| Shah | Sachin | M.S. | 1992 | Influence of Injection Molding Variables on the Mechanical Properties of Filled PBTP Using a Statistical Design of Experiment |
| Shan | Haifeng | Ph.D. | 2006 | Structure Development in Melt Spinning, Cold Drawing and Cold Compression of Poly(ethylene-co-octene) with Different Octene Content) |
| Shen | Chungsea | Ph.D. | 1995 | Phase Equilibrium and Phase Separation Dynamics in Polymer Dispersed Liquid Crystals |
| Shieh | Woei-Jian | M.S. | 1990 | Processability of Silica Filled Compounds |
| Shim | Sang Eun | Ph.D. | 2002 | Ultrasound Devulcanization of Silica Filled Silicone Rubber: Processing, Property and Molecular Aspects |
| Shimojo | Kenichi | M.S. | 1993 | Characterization of Strain-Induced Crystallization in Relation to Injection Molding of Thermoplastics |
| Shin | Jin-Woong | Ph.D. | 2003 | The Effect of Processing Parameters on Pressure Development, Gas Penetration Length and Residual Wall Thickness in Gas Assisted Injection Molding |
| Shin | Kyung Chul | M.S. | 1989 | Influence of Carbon Black on Extrudate Swell and Shrinkage in Rubber Compounds |
| Shin | Kyung Chul | Ph.D. | 1994 | A Basic Study of a Pin Barrel Screw Extruder |
| Shockey | Frederick | M.S. | 1996 | Relaxation Modulus Approximation with Fractional Calculus |
| Shon | Keungjin | Ph.D. | 2003 | Mixing Studies in Modular Intermeshing Co-Rotating Twin Screw Extruder, Modular Counter-Rotating Twin Screw Extruder, Buss Kneader and Kobelco Nex-T Continuous Mixer |
| Shyu | Goang-Ding | Ph.D. | 1993 | Birefringence and Residual Stresses in Molded Articles of Amorphous Polymers |
| Silin | Maxim | Ph.D. | 2002 | Some Problems of Polymer Flows in Channels and Dies |
| Simhambhatla | Murthy | M.S. | 1990 | Fundamental Studies on Biaxial Stretching, Plasma Treatment, and Vacuum Metallization of Poly(ether ether ketone) (peek) Films |
| Simhambhatla | Murthy | Ph.D. | 1994 | The Rheological Modeling of Simple Flows of Unfilled and Filled Polymers |
| Simmons | Sean | M.S. | 1999 | Optimization of Adhesively Bonded Single Lap Joints by Adherend Notching |
| Sobhanie | Mohammed | M.S. | 1996 | Rheological Models for Particle Filled Polymers |
| Sohn | Min-Seok | M.S. | 1989 | Characterization of Rotational Molding Resin Powders and Study of Structure-Property of Rotationally Molded Sample |
| Song | Chang Hoon | M.S. | 1994 | Phase Separation and Electro-Optical Properties of Polymer Dispersed Liquid Crystal Films |
| Song | Chang Hoon | Ph.D. | 1999 | Self-Reinforced Composites of Polyesters and PET/HBA Based LCP |
| Song | Han Jong | M.S. | 1987 | Die Extrusion of Rubber Compounds : Flow Patterns and Extrudate Character |
| Song | Kwangjin | Ph.D. | 1998 | Structure Development of Polyester and their Blends in Film Formation Processes |
| Song | Lin | Ph.D. | 2010 | Chemical Modification of Starch and Preparation of Starch-based Nanocomposites |
| Song | Sang-Sub | Ph.D. | 1990 | Fundamental Study of Structure Development and Processing in Polycondensate Compounds |
| Soundarrajan | Prabhu | M.S. | 2003 | Electrochemical Devices Based on Conducting Polymers and Aligned Carbon Nanotubes |
| Sridhar | Siddhamalli | M.S. | 1998 | Toughening of Epoxy/Thermoplastic Composites via Reaction Induced Phase Separation |
| Srinivasan | Ashok | M.S. | 1992 | Nonlinear Modeling of Melt Flow Instability |
| Stadler | Michael | M.S. | 2004 | Viscoelastic Properties of Unreinforced and Reinforced Plastic Lumber |
| Su | Wen-Yi | M.S. | 1993 | In-situ Copolymerization and Compatibilization of Polyester and Polystyrene Blends |
| Subramaniam | Pazampalacode | M.S. | 1993 | Blends and Composites of a Liquid Crystal Polymre with an Engineering Thermoplastic |
| Sudhindrakumar | Guruprasad | M.S. | 2003 | A Novel Economical Method to Improve the Toughness of CArbon/Epoxy Long Fiber Components by the Integration of Glass Tow Loops Core |
| Suh | Chang Ho | Ph.D. | 1995 | Rheology and Processing of Talc Filled Thermoplastics |
| Suh | Jaein | Ph.D. | 2007 | Comparative Structure Development of Various Polyolefins in Injection Molding Process |
| Suh | Kenneth | M.S. | 1991 | Fundamental Studies of Flow of Elastomers and Thermoplastics and Their Blends in an Internal Mixer, and Their Properties |
| Sujan | Brijesh | M.S. | 2005 | Revulcanization of Ultrasonically Devulcanized Tire Rubber: Cure Kinetics and Physical Properties |
| Sun | Ximei | Ph.D. | 2007 | The Devulcanization of Unfilled and Carbon Black Filled Isoprene Rubber Vulcanizates by High Power Ultrasound |
| Sundarapandian | Senthil Kumar | M.S. | 1993 | Viscoelastic Characterization of Poly(ethyl acrylate) |
| Sunthonpagasit | Nongnard | M.S. | 2000 | Improving Ultrasonic Weld Strength of Polypropylene by Joint Design, Polar Additives, and by the Methods of Excimer Laser, and Solvent Treatment |
| Suppiah | Giritharan | M.S. | 2002 | Effects of Plasticizers with Various Molecular Weight and Structure on Properties of Polyvinyl Chloride and its Blend with Polyurethane |
| Suri | Atul | M.S. | 1999 | Electrical Conductivity and Characterization of Polypropylene and Chemically Modified Polypropylenes Filled with Copper Powder |
| Swaminathan | Suresh | M.S. | 1988 | Thermoplastic Fiber-Reinforced Composites Based on Liquid Crystalilne Polymers |
| Tandel | Vijay | M.S. | 1994 | Miscibility and Conductivity of Polyethylene Oxide and Polypropylene Oxide Blends Complexed With a Copper Salt |
| Tapale | Mayuresh | M.S. | 1998 | Continuous Ultrasonic Devulcanization of Unfilled Natural Rubber Vulcanizates |
| Teli | Samar | M.S. | 2002 | Stress States and Interference in Double Adhesive Layer Scarf and Butt Joints |
| Thakkar | Hemant | M.S. | 2003 | The Morphology, Rheology and Processing of Thermoplastic Vulcanizates and Their Nanocomposites |
| Thongtan | Roungrong | M.S. | 2006 | Morphological Study of Compatibilization of Immiscible Polymer Blends Using a Functionalized Block Copolymer |
| Tsai | Hsien-Yin | M.S. | 1992 | The Deformation and Instability of Phase Morphology of Fluoroelastomer and Polycarbonate Blends |
| Tsai | Hsien-Yin | Ph.D. | 1995 | Functionalization of Polystyrene and Low Density Polyethylene and Their Reactive Blending With Polyethylene Terephthalate |
| Tse | Joseph | M.S. | 1989 | Processing-Structure-Property Relationships in Biaxially stretched Poly (Butylene Terephthalate)/Poly(Ethylene Isophthalae) Blends |
| Ulcer | Yakup | Ph.D. | 1995 | Injection Molding of Slowly Crystallizing Polymers |
| Vadhar | Parimal | M.S. | 1985 | Co-Crystallization and Miscibility Studies of Ultra-High Molecular Weight Polyethylene Blends |
| Vaidya | Nitin | Ph.D. | 1999 | Rheology, Phase Behavior and Morphology of Blends Containing Diblock Copolymer |
| Valladares | David | M.S. | 2002 | Real Time Strain Induced Crystallization and Structural Hierarchy Time Evolution in Crosslinked Natural Rubber |
| Van Sweden | Chadwick | M.S. | 2000 | Effect of Processing Conditions on Microstructure and Mechanical Properties of Injection Molding of Polypropylenes of Various Molecular Weights |
| Varkey | Joseph | Ph.D. | 1999 | Industrial and Scientific Significance of Polymer-Solvent Interaction Through Viscoelastic Properties |
| Varma | Rajesh | M.S. | 1997 | Miscibility Studies of Blends of Block Copolymers and Asphalt |
| Varma | Tilak | M.S. | 1991 | Blends of Thermoplastics Polyamides and a Lliquid Crystal Polymer |
| Venkateswaran | Hari | M.S. | 1992 | A Fast Dual Wavelength Optical Technique to Study Crystallization in Pre-Oriented PET Films |
| Viswanathan | Ravishankar | M.S. | 1994 | Mixing, Injection Molding and Lamination of Liquid Crystal Polymer Blends |
| Vongpanish | Pratum | Ph.D. | 2000 | Engineering Polymer Blends Based Upon Phenolic-Modified Polyolefins |
| Wadley | Maurice | Ph.D. | 2011 | Synthesis and Morphology Characterization of Polydimethylsiloxane-Containing Block Copolymers |
| Walker | Eric | M.S. | 2000 | Effect of Fillers on Ultrasonic Welding of Polypropylene |
| Wan | Min | Ph.D. | 1995 | Injection Molding of Rubber Compound with Rheology Affected by Vulcanization |
| Wang | Chi | Ph.D. | 1992 | Fracture Mechanics of Model Fiber composites |
| Wang | Dongbiao | Ph.D. | 2005 | In-Line Monitoring and Analysis of Polymer Melting Behavior in an Intermeshing Counter-Rotating Twin-Screw Extruder by Ultrasound Waves |
| Wang | Lei | M.S. | 1998 | Reactive Processing for Enhancement of Adhesion of Polypropylene with Acidic Monomers |
| Wang | Min-Diaw | M.S. | 1989 | Processing-Structure-Property Relationships in Biaxially Stretched and Tubular Blown Thermoplastic Elastomer Films |
| Wang | Xiaojiang | Ph.D. | 2012 | Polyester Based Hybrid Organic Coatings |
| Wang | Xueyuan | Ph.D. | 2012 | Control and Characterization of Textured, Hydrophobic Ionomer Surfaces |
| Wang | Yeh | Ph.D. | 1988 | Analysis and Computer-Aided Design of Extrusion Dies for Shaping of Rubber Compounds |
| Wang | Yundong | Ph.D. | 1996 | Processing-Structure-Property Relationships in Injection Molded PVDF and Blends of PVDF and PMMA |
| Wang Cordry | Shanshan | Ph.D. | 2007 | Development of Polymer Electrolytes of Polyurethane and Polyether Modified Polysiloxane Blends with Lithium Salts |
| Wong | Chang Min | Ph.D. | 1990 | The Effects of Sound and Ultrasound Oscillations upon Polymer Extrusion |
| Woods | Rochelle | M.S. | 1992 | Instrumented Compaction of Polymer Powders and Processing Structure Property Relationships |
| Wu | Chonggang | Ph.D. | 2006 | Transesterification, Mechanical Properties and Rheology of Blends of Thermoplastic Polyester and Model Thermotropic Polyester |
| Wu | Jong-Pyo | Ph.D. | 1991 | A Unified View of Polymer Chain Orientation in Complex Orientation State |
| Wutticharoenwong | Kosin | Ph.D. | 2007 | Bio-Based Reactive Diluents and Thiol-Ene Photopolymerization for Environmentally Benign Coatings |
| Xie | Kefu | M.S. | 1992 | Development of an In-Situ Curemeter |
| Yingsheng | Ph.D. | 2011 | Finite Element Analysis of Drop Deformation in the Entrance Region of a Cylindrical Tube | |
| Xu | Haijun | Ph.D. | 2004 | Effect of Self Generated Thermal Field on Spatio Temporal Growth of Hierarchical Structures During Polymer Crystalization |
| Xu | Jingli | M.S. | 2000 | |
| Yalcin | Baris | Ph.D. | 2004 | The Role of Clay Nanoparticles on the Development of Structural Hierarchy in Injection Molding of Nylon 6 and Uniaxial Stretching of Poly(vinyl chloride) |
| Yan | Han | Ph.D. | 2011 | Electrospinning-Derived Carbon/Graphite Nanofiber Mats from a Polyimide-Mesophase Pitch Blend Precursor for Flexible Thermal Management Thin Films |
| Yandek | Greogory | Ph.D. | 2005 | Experimental and Theoretical Investigations of Polymerization-Induced Phase Separation in Modified Epoxy Composite Materials and Photonic Crystals |
| Yang | Jen-Chang | M.S. | 1989 | Miscibility Studies of Nafion Perflourinated Ionomer and Polyvinylidene Fluoride Blends |
| Yang | Jen-Chang | Ph.D. | 1992 | Miscibility and Phase Transformations in Rigid Rod Molecular Composities |
| Yang | Jinhai | Ph.D. | 2008 | Phase Morphology and Orientation Development of Polymer Blends in Melt Processing |
| Yang | Kumin | M.S. | 1995 | Effects of Shear Flow and Annealing on Morphology of Rapidly Precipitated Immiscible Polymer Blends |
| Yang | Zhiyi | Ph.D. | 2007 | Rheology of Miscible Polymer Blends with Hydrogen Bonding |
| Ye | Pin | M.S. | 1993 | Adhesion of Crosslinked Polyethylene |
| Yoon | Pil Joong | Ph.D. | 1999 | Effect of Thermal History on the Rheology of Thermoplastic Polyurethanes |
| Yoon | Yeo Cheol | M.S. | 1991 | Structure Development in Rolled Poly(Vinylidene Fluoride) Sheets |
| Youn | Yeo-O | Ph.D. | 2004 | Structure-Morphology-Rheology Relationships in Thermopastic Polyurethanes |
| Yu | Liqun | M.S. | 2000 | Injection Welding |
| Yu | Yishan | Ph.D. | 2000 | Structure Development in Melt Processing Isotactic Polypropylene, Polypropylene Blends/Compounds and Dynamically Vulcanized Polyolefin TPES |
| Yun | Jushik | Ph.D. | 2003 | Recycling of Waste Tires and EPDM Rubbers Using High Power Ultrasonic Devulcanization |
| Yun | Seunghee | Ph.D. | 1994 | Fiber-Matrix Adhesion in Single Fiber Model Composites |
| Zha | Weibin | Ph.D. | 2006 | Organoclay Nanocomposites Based on Vinylpyridine-Containing Block Copolymers |
| Zhai | Qingpu | M.S. | 1994 | Air Lubricated Die for Rubber Extrusion |
| Zhang | Wenjin | M.S. | 2000 | Inverse Gas Chromatographic Studies of the Filler-Filler and Filler-Rubber Interactions |
| Zhao | Wei | Ph.D. | 2011 | Flexible Transparent Electrically Conductive Polymer Films for Future Electronics |
| Zheng | Qiang | M.S. | 1990 | Phase Transformations in Thermotropic Liquid Crystalline Copolyesters and Realted Polymer Blends |
| Zhou | Jianguo | Ph.D. | 2007 | Processing of Generic Circuits by Conductive Adhesives: Geometrical and Rheological Considerations |
| Zhou | Ming | Ph.D. | 2006 | Synthesis, Characterization, Phase Behavior and Rheology of Combined Main-Chain/Side-Chain Liquid-Crystalline Polymers |
| Zhou | Xixian | Ph.D. | 1998 | Processing-Structure-Property Relationships in Uni- and Biaxially Stretched Binary and Ternary Blends |
| Zhu | Guangchong | M.S. | 1994 | Structure, Rheology and Mechanical Properties of Kaolin/Polyamide 6 In-Situ Composites and their Blends with Conventional Polyamides |
| Zhuang | Ping | M.S. | 1987 | Fundamental Studies on Blends of a Thermotropic Aromatic Polyester Liquid Crystal with Thermoplastics |
| Zook | Christopher | Ph.D. | 2000 | Investigation into the Dynamic Behavior of an Injection Molding Non-Return Valve |
| Zou Matthews | Kunrong | M.S. | 2004 | Organic-Inorganic Hybrid Coatings Based on Cycloaliphatic Linseed Oil Epoxide |