1. G. V. Vinogradov, Yu. G. Yanovsky,
A. I. Isayev, and V. A. Kargin, "Effect of Vibrations on
Viscoelastic Behavior of Amorphous
Polymers", Proceedings of the Academy of Sciences of the
USSR, Phys. Chem. Sect. v. 197, 1075-1078,
1969.
2. G. V. Vinogradov, Yu. G. Yanovsky,
and A. I. Isayev, "Viscoelastic Behavior of an Amorphous
Polymer under Oscillations of Large
Amplitude", J. Polymer Sci., A-2, v. 8, 1239-60, 1970.
3. A. I. Isayev and Yu. G. Yanovsky, "Vibrorheometer
Having Coaxial Cylinders", Industrial
Laboratory,
v. 36, No. 12, 1950-54, 1970.
4. G. V. Vinogradov,
Yu. G. Yanovsky and A. I. Isayev, "Influence of Vibrations
(Cyclic
Deformations with
Large Amplitudes) upon Viscoelastic Properties of a Polypropylene
Melt", J.
Eng. Phys., v.19.,
No. 3, 1053-58, 1970.
5. A. I. Isayev, Yu.
G. Yanovsky, G. V. Vinogradov, and L. A. Gordievsky, "Mechanical
Parameters
of Dispersed Systems
under Cyclic Deformation with Various Amplitudes", J. Eng.
Phys., v. 18,
No. 6, 675-78, 1970.
6. G. V. Vinogradov, Yu. G. Yanovsky, A. I. Isayev,
V. P. Shatalov and V. G. Shalganova, "Effect of
Vibration
on the Viscoelastic Behavior of Monodisperse Polybutadienes",
Intern. J. Polymeric
Materials,
v. 1, No. 1, 17-30, 1971; Intern. Chem. Eng., v. 12, No. 2, 234-239,
1972; J. Eng.
Physics, v. 20,
No. 3, 273-279, 1971; Rubber Chem. Technol., v. 45, No. 4, 1082-1093,
1972.
7. G. V. Vinogradov, Yu. G. Yanovsky,
V. N. Pokrovsky, V. P. Shatalov, E. K. Borisenkova, V. G.
Shalganova,
V. V. Barancheeva, A. I. Isayev and V. A. Grechanowsky, "Critical
Conditions of
Deformation and
Viscoelastic Properties of Linear Polymers in the Fluid State",
Soviet Plastics,
No. 5, 11-19,
1971.
8. A. I. Isayev, "Universal Relaxation
Characteristics of Polymeric Systems", J. Eng. Physics,
v. 23, No. 5, 1406-12, 1972.
9. A. I. Isayev, G. V. Berezhnaya and A. Ya. Malkin, "Universal
Super-Elasticity Characteristics of
Polymeric
Systems", J. Eng. Phys., v. 24, No. 1, 69-73, 1973.
10. A. I. Isayev, "General Characterization of Relaxation Properties
and High Elasticity of Polymer
Systems",
J. Polym. Sci., Phys. Ed., v. 11, No. 11, 2123-2133, 1973.
11. G. P. Andrianova and A. I. Isayev, "Viscoelastic Properties
of Polypropylene Melts Modified by
Small
Additions", Polym. Sci. USSR, v. 15, No. 8, 2086-90, 1973.
12. A. I. Isayev, K. D. Vachagin and A. M. Neberezhnov,
"Engineering Method for Calculating the
Flow
of Polymers in Noncircular Channels", J. Eng. Phys., v. 27,
No. 2, 998-1002, 1974.
13. A. I. Isayev, V. A. Zolotarev
and G. V. Vinogradov, "Viscoelastic Properties of Bitumens
under
Continuous and Cyclic Deformations",
Rheol. Acta, v. 14, No. 2, 135-144, 1975.
14. Nguen
Vin Chii, A. I. Isayev, A. Ya. Malkin, G. V. Vinogradov and I. Yu.
Kirchevskaya, "The
Viscosity
and Viscoelastic Properties of Mixtures and Block Copolymers of
the Polybutadiene
with Polyisoprene",
Polym. Sci. USSR, v. 17, No. 4, 983-989, 1975.
15.
V. I. Brizitsky, G. V. Vinogradov, A. I. Isayev and Yu. Ya, Podolsky,
"Birefringence
Measurement
of Normal and Tangential Stresses in Polymer Flows", J. Eng.
Phys, v, 29, No. 6,
1479-84, 1975.
16. A. Ya. Malkin, A. I. Isayev and G. V. Vinogradov,
"Power Estimate of the Effectiveness of
Vibrational
Thinning of Polymer and Filled Systems", Polymer Mechanics,
v. 11, No. 3, 349-444,
1975.
17. V. A. Zolotarev, A. I. Isayev and G. V. Vinogradov,
"Viscoelastic Properties of Bitumens in
Continuous
and Cyclic Deformations", J. Eng. Phys. V. 29, No. 2, 1055-1061,
1975.
18. V. I. Brizitsky, C. V. Vinogradov, A. I.
Isayev and Yu. Ya. Podolsky, "Polarization Optical
Investigation
of Normal and Shear Stresses in Flow of Polymers", J. Appl.
Polymer Sci., v. 20,
No. 1, 25-40,
1976.
19. A. I. Isayev, A. A. Konstantinov, A. K.
Kulapov, B. A. Rogov, A. B. Bystrov and A. A. Shakhrai,
"VR-72
Vibrorheometer for Determining the Viscoelastic Properties of Polymers",
Polymer
Mechanics, No. 3, 502-506,
1976.
20. V. Z. Volkov, V. P. Fikhman, G. V. Vinogradov
and A. I. Isayev, "The Entrance Effects in
Viscoelastic
Fluid Flow in Cylindrical Nozzles", J. Eng. Physics, v. 32,
No. 1, 51-55, 1977.
21. G. V. Vinogradov, A.
I. Isayev, V. I. Brizitsky, Yu. Ya. Podolsky, A. Ya. Malkin and
M. P.
Zabugina, "Die Swell,
Normal Stress and Viscoelastic Deformations in Polymer Flow",
Polymer
Mechanics, v. 13, No.
1, 112-117, 1977.
22. G. V. Vinogradov, A. I. Isayev,
V. A. Zolotarev and E. A. Verebskaya, "Rheological Properties
of
Road Bitumens", Rheol.
Acta, v. 16, No. 3, 266-281, 1977.
23. A. N. Prokunin,
A. I. Isayev and E. Kh. Lipkina, "Parallel Superpositionof
Oscillatory Motion on
the Steady
Flow of Polymeric Liquids", Polymer Mechanics, v. 13, No. 4,
589-94, 1977.
24. V. G. Vinogradov, A. I. Isayev,
D. A. Mustafayev and Yu. Ya, Podolsky, "Polarization-Optical
Investigation of Polymers in Fluid
and High-elastic States Under Oscillatory Deformation", J.
Appl. Polymer Sci., v. 22, No. 3,
665-677, 1978.
25. V. I. Brizitsky, G. V. Vinogradov,
A. I. Isayev and Yu. Podolsky, "Extensional Stresses During
Polymer Flow in Ducts", J. Appl.
Polymer Sci., v. 22, No. 3, 751-767, 1978.
26. G.
V. Vinogradov, A. I. Isayev and E. V. Katsyutsevich, "Critical
Regimes and Oscillatory
Deformation
of Polymeric Systems Above Glass Transition and Melting Temperatures",
J. Appl.
Polymer Sci., v. 22,
No. 3, 727-749, 1978.
27. A. I.
Isayev and D. Katz, "Large Amplitude Cyclic Deformation of
a Crosslinked Epoxy Resin in
the
Transition Zone", Intern. J. Polymeric Materials, v. 8, 25-43,
1980.
28. D. Katz, Y. Smooha and A. I. Isayev, "Dynamic
Properties of an Unfilled and Filled Epoxy Resin
Subjected
to Extensional Creep", J. Materials Science, v. 15, 1167-1174,
1980.
29. A. I. Isayev and C. A. Hieber, "Toward
a Viscoelastic Modeling of the Injection Molding of
Polymers",
Rheol. Acta, v. 19, 168-182, 1980.
30. A. I. Isayev,
D. Katz and Y. Smooha, "Dynamic Properties of Crosslinked Epoxy
Resin at Large
Cyclic and Static
Deformation", Polym. Eng. Sci., v. 21, No. 9, 566-570, 1981.
31. R. K. Upadhyay, A. I. Isayev and S. F. Shen, "Transient
Shear Flow Behavior of Polymeric
Fluids
According to the Leonov Model", Rheol. Acta, v. 20, No. 5,
443-457, 1981.
32. A. I. Isayev and C. A. Hieber,
"Oscillatory Shear Flow of Polymeric Systems", J. Polymer
Sci.,
Polymer Physics Ed., v.
20, No. 3, 423-440, 1982.
33. C. A. Hieber, L. S.
Socha, S. F. Shen, K. K. Wang and A. I. Isayev, "Filling Thin
Cavities of
Variable Gap Thickness:
A Numerical and Experimental Investigation", Polym. Eng.
Sci., v. 23,
No. 1, 20-26, 1983.
34. A. I. Isayev, "Orientation Development
in the Injection Molding of Amorphous Polymers", Polym.
Eng. Sci., v. 23, No. 5, 271-88, 1983.
35. R. K. Upadhyay, A. I. Isayev and S. F. Shen, "Modeling
of Stresses in Multi-Step-Shear
Deformation
of Polymeric Fluids", J. Rheol., v. 27, No. 2, 155-169, 1983.
36. R. K. Upadhyay and A. I. Isayev, "Elongational
Flow Behavior of Polymeric Fluids According to
the
Leonov Model", Rheol. Acta, v. 22, 557-568, 1983.
37. R. K. Upadhyay and A. I. Isayev, "Nonisothermal Elongational
Flow of Polymeric Fluids
According
to the Leonov Model", J. Rheol., v. 28, 581-600, 1984.
38. A. I. Isayev and D. L. Crouthamel, "Residual
Stress Development in the Injection Molding of
Polymers",
Polymer Plastics Technology and Engineering, v. 22, No. 2, 177-232,
1984.
39. A. I. Isayev, "Unsteady Channel Flow
of Polymeric Fluids", J. Rheol., v. 28, 4, 411-438, 1984.
40. A. I. Isayev and B. Chung, "Flow of Polymeric
Melts in Short Tubes", Polym. Eng. Sci., v. 25, 5,
264-270,
1985.
41. A. I. Isayev and T. Hariharan, "Volumetric
Effects in the Injection Molding of Polymers", Polym.
Eng.
Sci., v. 25, 5, 271-278, 1985.
42. A. I. Isayev and
R. K. Upadhyay, "Two-Dimensional Viscoelastic Flows, Experimentation
and
Modelling", J. Non-Newt.
Fluid Mech., v. 19, 135-160, 1985.
43. Y. A. Ma,
J. L. White, F. C. Weissert, A. I. Isayev, N. Nakajima and K. Min,
"Flow Patterns in
Elastomers
and Their Carbon Black Compounds During Extrusion Through Dies",
Rubber Chem.
Technol., 58, 4,
815-829, 1985,
44. R. K. Upadhyay and A. I. Isayev,
"Simulation of Two-Dimensional Planar Flow of Viscoelastic
Fluid", Rheol. Acta, v. 25, 80-94,
1986.
45. A. Y. Isayev and A. D. Azari, "Viscoelastic
Effect in Compression Molding of Elastomers:
Shear-Free
Squeezing Flow", Rubber Chem. Technol., 59, 5, 868-882, 1986.
46. A. I. Isayev and N. Famili, "Simulation of Nonisothermal
Extrusion of Viscoelastic Melt in Slit
Die",
J. Plastic Film and Sheeting, v. 2, 269-297, 1986.
47. A. I. Isayev and M. Modic, "Self-Reinforced Melt Processible
Polymer Composites. Extrusion,
Compression
and Injection Molding", Polymer Composites, v. 8, 269-297,
1987.
48. J. L. White, Y. Wang, A. I. Isayev,
N. Nakajima, F. C. Weissert and K. Min, "Modeling of Shear
Viscosity Behavior and Extrusion Through
Dies of Rubber Compounds", Rubber Chem. Technol.,
60,
2, 337-360, 1987.
49. A. I. Isayev, and J. S. Deng,
"Nonisothermal Vulcanization of Rubber Compounds", Rubber
Chem. Technol., 61, 340-361, 1988.
50. A. I. Isayev, M. Sobhanie and J. S. Deng, "Two-Dimensional
Simulation of Injection Molding of
Rubber
Compounds", Rubber Chem. Technol., 61, 906-937, 1988.
51. A. I. Isayev and C. M. Wong, "Parallel Superposition of
Small and Large Amplitude Oscillations
upon
Steady Shear Flow of Polymer Fluids, J. Polym. Sci., Polymer Phys.,
26, 2303-2327,
1988.
52. M. Sobhanie and A. I. Isayev, "Viscoelastic Simulation
of Flow of Rubber Compounds", Rubber
Chem.
Technol., 62, 5, 939-956 (1989).
53. C. M. Wong and
A. I. Isayev, "Orthogonal Superposition of Small and Large
Amplitude
Oscillations Upon Steady
Shear Flow of Polymeric Fluids", Rheol. Acta, 28, 176-189 (1989).
54. A. I. Isayev, C. M. Wong and X. Zeng, "Flow
of Thermoplastics in an Annular Die Under
Orthogonal
Oscillations", J. Non-Newt. Fluid Mech., 34, 375-397 (1990).
55. A. I. Isayev and Xiyun Fan, "Viscoelastic Plastic
Constitutive Equation for Flow of Particle Filled
Polymers",
J. Rheol., 34, 1, 35-54 (1990).
56. A. I. Isayev
and Y.-H. Huang, "Unsteady Flow of Rubber Compounds at Injection
Molding
Conditions", Advances
in Polymer Technology, 9, No. 3, 167-180 (1989).
57. M. Sobhanie, J. S. Deng and A. I. Isayev, "Simulation and
Experimental Studies of Injection
Molding
of Rubber Compounds", J. Appl. Polym. Sci., Applied Polymer
Symposium, 44,
115-165 (1989).
58. C. M. Wong, C. H. Chen and A. I. Isayev, "Flow
of Thermoplastics in an Annular Die under
Parallel
Oscillations", Polymer Eng. Sci., 31,1514-1584(1990).
59. J. S. Deng and A. I. Isayev, "Injection Molding
of Rubber Compounds- Experimentation and
Simulation",
Rubber Chem. Technol., 64, 2, 296-324 (1991).
60.
A. I. Isayev, C. M. Wong and X. Zeng, "Effect of Oscillations
During Extrusion on Rheology and
Mechanical
Properties of Polymers", Advances in Polymer Technology, 10,
No. 1, 31-45 (1990).
61. T. Limtasiri and A. I. Isayev,
"Blends of Thermotropic Polyester with Poly(phenylene Oxide)",
J.
Appl. Polym. Sci., 42, 2923-2932
(1991).
62. P. R. Subramanian and A. I. Isayev, "Blends
of Thermotropic Polyester with Poly(phenylene
Sulfide)",
Polymer, 32, 1961-1969 (1991).
63. A. Mehta and A.
I. Isayev, "The Dynamic Properties, Temperature Transitions
and Thermal
Stability of PEEK-Thermotropic
Liquid Crystalline Polymer Blends", Polym. Eng. Sci., 31,
963-970 (1991).
64. A. Mehta
and A. I. Isayev, "Rheology, Morphology and Mechanical Characteristics
of
PEEK-LCP Blends", Polym.
Eng. Sci., 31, 971-980 (1991).
65. A. I. Isayev and
S. Mandelbaum, "Effect of Ultrasonic Waves on Foam Extrusion",
Polym. Eng.
Sci., 31, 1051-1056
(1991). Abstract
66. A. I. Isayev
and Toru Hosaki, "Temperature in Rubber Moldings During Injection
Molding Cycle:
Simulation and
Experimentation", Journal of Elastomers and Plastics, 23, 176-191
(1991).
67. A. Buchman and A. I. Isayev, "Water
Absorption of Some Thermoplastic Composites", SAMPE
Journal,
31, No. 4, 30-36 (1991).
68. A. Buchman and A. I.
Isayev, "Quality Assurance of Various Thermoplastic Composites",
SAMPE Journal, 31, No. 4, 19-27 (1991).
69. H. J. Kang, E. Buchman and A. I. Isayev, "Measurement
of Processing Variables in
Manufacturing
of Thermoplastic Composites", SAMPE Journal, 31, No. 5, 21-27
(1991).
70. A. I. Isayev and P. R. Subramanian ,
"Blends of a Liquid Crystalline Polymer with Polyether
Ether Ketone", Polym. Eng. Sci.,
32, 85-93 (1992).
71. R. Garcia-Ramirez and A. I.
Isayev, "Helical Flow of a Viscoelastic Fluid-an Approximation
Towards Rotational Extrusion",
J. Rheol., 36, 1183-1211 (1992).
72. S. Akhtar and
A. I. Isayev, "Self-Reinforced Composites of Two Thermotropic
Liquid Crystalline
Polymers",
Polym. Eng. Sci., 33, 32-42 (1993).
73. Y. H. Huang
and A. I. Isayev, "An Experimental Study of Planar Entry Flow
of Rubber
Compound", Rheol.
Acta, 32, 270-276 (1993).
74. A. I. Isayev and Y.
H. Huang, "Two-Dimensional Planar Contraction and Expansion
Flow of a
Viscoelastic Plastic
Medium", Rheol. Acta, 32, 181-191 (1993).
75.
F. Cai and A. I. Isayev, "Dynamic Vulcanization of Thermoplastic
Copolyester Elastomer/Nitrile
Rubber
Alloys I: Various Mixing Methods", J. Elast. Plast., 25, 74-89
(1993); Advances in
Elastomers,
1, 153-168 (1994).
76. F. Cai and A. I. Isayev, "Dynamic
Vulcanization of Thermoplastic Copolyester Elastomer/Nitrile
Rubber Alloys II: Rheology, Morphology
and Properties", J. Elast. Plast. 25, 249-265 (1993).
77. T. W. Chan, G. D. Shyu and A. I. Isayev, "Reduced Time
Approach to Nonisothermal Kinetics.
Part
1: Dynamic Rate and Master Curve from Isothermal Data", Rubber
Chemistry and
Technology, 66,
849-864 (1993).
78. T. W. Chan and A. I. Isayev,
"Quiescent Polymer Crystallization: Modeling and Measurements",
Polym. Eng. Sci., 34, 461-471 (1994).
79. A. I. Isayev, Y. Holdengreber, R. Viswanathan and
S. Akhtar, "Self-Reinforced
Thermoplastic-LCP
Prepregs and Laminates", Polymer Composites, 15, No.4, 254-260
(1994).
80. A. I. Isayev, R. J. Scavuzzo and Y. Kuroyama,
"Injection Molding of Rubber Compounds: Cavity
Filling,
Packing and Flash Formaton? J. Appl. Polym. Sci., Applied Polymer
Symposium, 53,
233-252 (1994).
81. G. D. Shyu, T. W. Chan and A. I. Isayev, "Reduced
Time Approach to Curing Kinetics, Part 2:
Master
Curve from Nonisothermal Data", Rubber Chemistry and Technology,
67, 314-328 (1994).
82. A. I. Isayev and X. Fan,
"Steady and Oscillatory Flow of Silicon-Propylene Ceramic Compound",
J. Mater. Sci., 29, 2931-2938 (1994).
83. T. W. Chan, G. D. Shyu and A. I. Isayev, "Master
Curve Approach to Polymer Crystallization
Kinetics",
Polym. Eng. Sci., 35, 733-740 (1995).
84. R. Ding
and A. I. Isayev, "Self-Reinforced LCP-LCP Blends, Prepregs
and Laminates", J.
Thermoplastic
Composite Materials, 8, 208-224 (1995).
85. R. Viswanathan
and A. I. Isayev, "Blends of a PPO-PS alloy with a Liquid
Crystalline Polymer",
J.
Appl. Polym. Sci., 55, 1117-1129 (1995).
86. A. I.
Isayev and R. Viswanathan, "Self-Reinforced Prepregs and Laminates
of a PPO-PS Alloy
with a Liquid
Crystalline Polymer", Polymer, 36, 1585-1596 (1995).
87. A. I. Isayev, T. W. Chan, K. Shimojo and M. Gmerek, "Injection
Molding of Semicrystalline
Polymers,
Part 1: Material Characterization", J. Appl. Polym. Sci., 55,
807-819 (1995).
88. A. I. Isayev, T. W. Chan, M.
Gmerek and K. Shimojo, "Injection Molding of Semicrystalline
Polymers, Part 2: Modeling and Experimentation",
J. Appl. Polym. Sci., 55, 821-838 (1995).
89. A.
I. Isayev, J. Chen and A. Tukachinsky, "Novel Ultrasonic Technology
for Devulcanization of
Waste Rubbers",
Rubber Chemistry and Technology, 68, 267-280 (1995); Abstract
Gummi Fasern Kunststoffe,
48, 550-559 (1995).
90. A. Tukachinsky, D. Schworm
and A. I. Isayev, "Devulcanization of Waste Tire Rubber by
Powerful Ultrasound", Rubber
Chemistry and Technology, 69, 92-103 (1996). Abstract
91. V. Yu.
Levin, S. H. Kim, A. I. Isayev, J. Massey and E. von Meerwall, "Ultrasound
Devulcanization of Sulfur Vulcanized
SBR: Crosslink Density and Molecular Mobility", Rubber
Chemistry and Technology, 69, 104-114
(1996) Abstract
92. A. I. Isayev, S. P.
Yushanov and J. Chen, "Ultrasonic Devulcanization of Rubber
Vulcanizates.
Part 1: Process
Model", J. Appl. Polym. Sci., 59, 803-813 (1996). Abstract
93. A. I. Isayev,
S. P. Yushanov and J. Chen, "Ultrasonic Devulcanization of
Rubber Vulcanizates.
Part 2: Simulation
and Experiment", J. Appl. Polymer Sci., 59, 815-824 (1996).
Abstract
94. A. I. Isayev and M.
Wan, "Injection Molding of Rubber Compound with Rheology Affected
by
Vulcanization, Part 1: Material
Characterization", Rubber Chemistry and Technology, 69,
277-293 (1996).
95.
M. Wan and A. I. Isayev, "Injection Molding of Rubber Compound
with Rheology Affected by
Vulcanization,
Part 2: Modeling and Experiment", Rubber Chemistry and Technology,
69,
294-312 (1996).
96. A. I. Isayev, S. P. Yushanov, D. Schworm and A. Tukachinsky,
"Modeling of Ultrasonic
Devulcanization
of Tyre Rubbers and Comparison with Experiments", Plastics,
Rubber and
Composites Processing
and Applications, 24, 1-12 (1996). Abstract
97. A. I. Isayev,
D. Cao and B. Dinzburg, "Elastic Recovery of Rubber Vulcanizates
at Very Short
Times", J.
Elastomers and Plastics, 28, 344-381 (1996).
98.
S. P. Yushanov, A. I. Isayev and V. Yu. Levin, "Percolation
Simulation of the Network
Degradation
during Ultrasonic Devulcanization", J. Polymer Science, Physics
Ed., 34,
2409-2418 (1996) Abstract
99. A. I. Isayev,
S. P. Yushanov, S. H. Kim and V. Yu. Levin, "Ultrasonic Devulcanization
of Waste
Rubbers: Experimentation
and Modeling", Rheologica Acta, 35, 616-630 (1996). Abstract
100. V. Yu.
Levin, S. H. Kim and A. I. Isayev, "Vulcanization of Ultrasonically
Devulcanized SBR
Elastomers",
Rubber Chemistry and Technology, 70, 120-128 (1997) Abstract;
Gummi
Fasern Kunststoffe, 51, 898-905 (1998). Abstract
101. A. I.
Isayev and B. F. Catignani, "Crystallization and Microstructure
in Quenched Slabs of
Various Molecular
Weight Polypropylenes", Polymer Engineering and Science, 37,
1526-1539
(1997).
102. M. Sobhanie, A. I. Isayev and X. Fan, "Viscoelastic-Plastic
Rheological Model for Particle
Filled
Polymer Melts", Rheologica Acta, 36, 66-81 (1997).
103. W. Bu and A. I. Isayev, "Prepregs and Laminates of Polyetherimide
Reinforced by
Thermotropic LCP",
J. Applied Polymer Science, 64, 329-340 (1997).
104.
S. T. Johnston, J. Massey, E. von Meerwall, S. H. Kim, V. Yu. Levin
and A. I. Isayev,
"Ultrasound
Devulcanization of SBR: Molecular Mobility of Gel and Sol",
Rubber Chemistry and
Technology,
70, 183-193 (1997). Abstract
105. A. I.
Isayev, S. H. Kim and V. Yu. Levin, "Reclaimed SBR with Superior
Mechanical
Properties", Rubber
Chemistry and Technology, 70, 194-201 (1997). Abstract
106. V. Yu.
Levin, S. H. Kim and A. I. Isayev, "Effect of Crosslink Type
on the Ultrasound
Devulcanization
of SBR Vulcanizates", Rubber Chemistry and Technology, 70,
641-649
(1997). Abstract
107. S. P.
Yushanov, A. I. Isayev and S. H. Kim, "Ultrasonic Devulcanization
of SBR Rubber:
Experimentation
and Modeling Based on Cavitation and Percolation Theories",
Rubber
Chemistry and Technology,
71, 168-190 (1998). Abstract
108. T. Luo
and A. I. Isayev, “Rubber/Plastic Blends Based on Devulcanized Ground
Tire Rubber?
J. Elastomers and
Plastics, 30, 133-160 (1998). Abstract
109. B. Diao, A.
I. Isayev, V. Yu. Levin and S. H. Kim, “Surface Behavior of Blends
of SBR with
Ultrasonically Devulacanized
Silicone Rubber? J. Applied Polymer Science, 69, 2691-2696
(1998).
Abstract
110. M. Tapale and A. I. Isayev,
“Continuous Ultrasonic Devulcanization of Unfilled NR
Vulcanizates?
J. Applied Polymer Science, 70, 2007-2019 (1998). Abstract
111. C. H.
Song and A. I. Isayev, “Nanocomposites of PET and PET/HBA Based
LCP? Journal of
Polymer Engineering,
18, 417-450 (1998).
112. A. I. Isayev and
M. Wan, “Injection Molding of Natural Rubber Compound: Simulation
and
Experimental Studies? Rubber
Chemistry and Technology, 71, 1059-1072 (1998).
113.
M. Sobhanie and A. I. Isayev, "Experimental and Theoretical
Investigation of Shear Flow of a
Filled
Polymer? J. Non-Newt. Fluid Mech., 85, 189-212 (1999).
114. B. Diao, A. I. Isayev and V. Yu. Levin, “Basic Study of Continuous
Ultrasonic Devulcanization
of
Silicone Rubber? Rubber Chemistry and Technology, 72, #1 (1999).
Abstract
115. B. de Carvalho, R.
E. S. Bretas and A. I. Isayev, “Crystallization and Microstructure
in
Quenched Slabs of Various Molecular
Weight Polypropylenes: Modified Modeling and
Experiments?
J. Applied Polymer Science, 73, 2003-2015 (1999).
116. X. Guo and A.
I. Isayev, “Crystallinity and Microstructure in Injection Moldings
of Isotactic
Polypropylenes. Part
I. A New Approach to Modeling and Model Parameters? Polym. Eng.
Sci.
(accepted).
117. X. Guo, A. I. Isayev and M. Demiray, “Crystallinity and Microstructure
in Injection Molding of
Isotactic
Polypropylenes. Part II. Simulation and Experiments? Polym. Eng.
Sci. (accepted).
118. V. V. Yashin and A. I. Isayev,
“A Model for Rubber Degradation Under Ultrasonic Treatment.
Part I: Acoustic Cavitation in Viscoelastic
Solid? Rubber Chem. Technol. (accepted).
119. S.
H. Kim and A. I. Isayev, “Continuous Ultrasonic Treatment of Uncured
and Sulfur-Cured
SBR: Effect of
Styrene Content? Rubber Chem. Technol. (under revision).
120. S. H. Kim, V. Yu. Levin and A. I. Isayev, “Effect of Carbon
Black on the Ultrasound
Devulcanization
of Sulfur Cured SBR Vulcanizates? Rubber Chemistry and Technology
(under
revision).
121. X. Guo and A.
I. Isayev, “Thermal Residual Stresses in Freely Quenched Slabs of
Semicrystalline Polymers: Simulation
and Experiment? J. Applied Polymer Science
(submitted).
122. Y. Churdpunt,
B. Catignani and A. I. Isayev, “Crystallization Kinetic and Growth
Rate Behavior
of Ziegler-Natta
and Metallocene Based Isotactic Polypropylenes? J. Polymer Science,
Physics
Ed. (submitted).
123. Y. Churdpunt and
A. I. Isayev, “Crystallization and Microstructure of Quenched Slabs
of
Ziegler-Natta and Metallocene
Based Isotactic Polypropylenes: Simulation and Experiment? J.
Polymer Science, Physics Ed. (submitted).
124. A. I. Isayev,
Y. Churdpunt and X. Guo, “Comparative Study of Ziegler-Natta and
Metallocene
Based Polypropylenes
in Injection Molding: Simulation and Experiment? Intern. Polym.
Process. (submitted).
125. Y. Churdpunt and
A. I. Isayev, “Comparison of Birefringence and Mechanical Properties
of
Injection Molded Metallocene
and Ziegler-Natta Based Isotactic Polypropylenes,?J. Polymer
Eng. (under revision). |