Alumni Dissertations and Theses

Click on the column headings below to sort the table.
To search for specific alumni or dissertations, press CTRL+F or COMMAND+F to use your browser's search feature.

DPE Alumni
Last Name First Name      Degree       Year       Thesis/Dissertation
Acharya Sunil Ph.D. 2005 Micromechanics of Asperity Interaction in Wear - A Numerical Approach
Adames Juan Ph.D. 2007 Characterization of Polymeric Binders for Metal Injection Molding (MIM) Process
Adebayo Gbolarumi Ph.D. 2001 Design, Validation and Implementation of On-Line Measurement Techniques to Study the Phase Behavior of Partially Miscible PMMA/PaMSAN Blends Under Quiescent and Flow Conditions, and Application to Filled-PVC in Quiescent Mode
Adewale Ajayi Ph.D. 1993 Experimental and Theoretical Isothermal Flow Studies in Modular Intermeshing Counter-Rotating Twin Screw Extruders
Adewale Kolapo Ph.D. 1996 Modeling of Melt Flow Instabilities of High Molecular Weight Polymer with Narrow Molecular Weight Distribution
Adwani Sunil M.S. 2003 The Use of Excimer Laser Evaluation of Processing Effects in Injection Molded PS and PC
Agarwal Sheel M.S. 2000 Development and Application of Lambourn Type Abrasion Tester on NR and SBR Blends
Agrawal Aparna Ph.D. 2023 Multifunctional Aerogels through Structural and Morphology Control: Additive Manufacturing and Coatings Aided Approach
Ahmad Nazir Nadzrinahamin Ph.D. 2011 Modification and Characterization of Nafion Perfluorinated Ionomer Membrane for Polymer Electrolyte Fuel Cells
Ahn Dae Up Ph.D. 2007 Well-Aligned 3-Dimensional Self-Assembly in Block Copolymers and Their Nanotechnological Applications
Ahn Sungtae Ph.D. 2003 The Influence of Additives and Additive Migration on Rheological Properties and Processing of Polymer Melt Compounds
Ahn Yongjin M.S. 1994 Wear of Slipping Wheels
Al-Munif Munif Hamad M.S. 2003 Enhancement of Mechanical Properties of Polyethylene Terephthalate Via In-Situ Compatibilization Process with Linear Low Density Polyethylene Modified with Glycidyl Methacrylate and Organic Clay
Al-Salloum Mohammed M.S. 2021 Use of Pyrolyzed Soybean Hulls as Filler in Polyamide-6
Al-Yamani Faisal M.S. 2005 A Route to Enhanced Intercalation in Rubber Silicate Nanocomposites
Albehaijan Hamad M.S. 2017 Approaches to Enhance Filler-Polymer Interactions and Cure Properties of Rubber Compounds
Albehaijan Hamad Ph.D. 2020 Approaches Toward Optimum Mechanoelectrical and Electrochemical Performance of Ion Containing Polymer Composites
Almazrou Yaser M.S. 2018 Effects of Mobile Nanoparticles on the Morphology and Topography of Polysulfone/Polyimide Thin Films
Almazrou Yaser Ph.D. 2023 Development and Optimization of Flexoelectric and Electrochemical Performance of Multifunctional Polymer Electrolyte Membranes for Energy Harvesting and Storage
Alrashed Maher M.S. 2013 Polyurethane/Polysiloxane Ceramer Nanocomposite Coating for Aircraft Applications
Alrashed Maher Ph.D. 2017 Organic/Inorganic Hybrid Coatings for Anticorrosion Applications
Alyamac Elif Ph.D. 2009 Self-Stratifying Coatings
Ammar Ali M.S. 2012 The Morphology and Mechanical Properties of Polysulfone/Polyimide Nanocomposite Films
Ammar Ali Ph.D. 2018 Reduction of Graphene Oxide using Microwave and its Effect on Polymer Nanocomposites Properties
Ariza Nathan M.S. 2018 An Investigation on Compressive Mechanical Properties of Syndiotactic Polystyrene Gels and the Conductive Behavior of Syndiotactic Polystyrene Ionogels
Asiri Abdulaziz M.S. 2003 A Novel Economical Method to Improve the Toughness of Carbon/Epoxy Long Fiber Components by the Integration of Carbon/Epoxy Tow Loops Core
AstiKevinM.S.2016Evaluation of the Efficacy of Zinc Sulfonated EPDM Ionomer as an Impact Modifier for Polyamide6
Aussawasathien Darunee Ph.D. 2006 Electrospun Conducting Nanofiber-Based Materials and Their Characterizations: Effects of Fiber Characteristics on Properties and Applications
Ayrom Keuchel Haleh Ph.D. 1997 Development of Spatial Structural Hierarchy in Injection Molded Isotactic Polypropylene
Ayyer Ravishankar M.S. 2003 Rheology of Polyamide-6/Montmorillonite Based Silicate Polymer/Layered Nanocomposites
Azari Arsalan M.S. 1988 Shear-Free Squeezing Flow of Polymer Melts - Equibiaxial Stretching
Azmoudeh Mohammad M.S. 1992 Synergistic Processing Strategies in Forging of Polymer-Metal Powder Mixtures
Babrowicz Robert M.S. 1989 The Effect of Polystyrene Domain Structure on the Rheological Behavior and Adhesive Performance in a Styrene-Isoprene-Styrene Pressure Sensitive Adhesive
Baena Johanna Ph.D. 2006 Processing and Kinetic Studies of the Reactive Blends of Poly(vinylchloride) and Thermoplastic Polyurethanes
Bahl Kushal M.S. 2010 Optimum Process Conditions for Production of Thermally Conductive Polymer Compounds Using Boron Nitride
BahlKushalPh.D.2014Towards Development of Lignin Reinforced Elastomeric Compounds with Reduced Energy Dissipation
Bai Lan M.S. 2001 The Effects of Filler Volume Fraction and Film Thickness on Resistivity of Conductive Adhesives
Bajpai Vardhan Ph.D. 2005 Syntheses, Characterization and Applications of Micro-/Nano-Structured Conducting Polymers and Carbon Nanotubes
Bakan Murat Ph.D. 2015 Development of Polymer Resin-based Wet Friction Sheet Materials and Understanding their Interactions with Automatic Transmission Fluids
Ban Kyun Ha Ph.D. 2008 Mechanism and Significance of Slip and New Mixing Elements During Flow in Modular Intermeshing Co-Rotating Twin Screw Extruders
Bandyopadhyay Diya Ph.D. 2012 Controlling Polymer Thin Film Instabilities via Tuning of Polymer-Substrate Interactions and Suppression of Capillary Waves
Bang Dae-Suk Ph.D. 1996 Theoretical and Experimental Flow Studies in Modular Tangential Counter-Rotating Twin Screw Extruders
Bas Gamze Ph.D. 2017 Predictive Modeling for Rate Dependent Toughened-Adhesive Behavior During Impact
Bas Serkan Ph.D. 2009 Synthesis of Hybrid Latexes and Polymerization Kinetics of Functional Latexes
Basak Sayan Ph.D. 2023 Structure-Property Relationships of High CIS 1.4 Polybutadiene Based Shape Memory Polymers
Basutkar Monali Ph.D. 2018 Directed Self-Assembly of Nanostructured Block Copolymer Thin Films via Dynamic Thermal Annealing
BatraSaurabhPh.D.2014Field Assisted Self Assembly for Preferential Vertical Alignment of Particles and Phases using a Novel Roll-to-Roll Processing Line
Bawiskar Santosh M.S. 1992 Simulation of Heat Transfer: Warpage and Residual Stresses in Rotational Molding
Bawiskar Santosh Ph.D. 1997 Experimental and Theoretical Investigation of Solids Conveying, Melting and Global Behavior in Self Wiping Co-Rotating Twin Screw Extruders
Beers Adam M.S. 1999 Deformation Behavior and Structural Development of Polyethylene Naphthalate/Polycarbonate Blends
Belatreche Mehdi Jean M.S. 2002 A Theoretical and Experimental Study of Liquid Crystalline Polymers
Beltran Osuna Angela M.S. 2011 Evaluation of Antifouling Materials Based on Silica Gels
Benavides Gonzalez Rafael Ph.D. 2013 Gas Jet Process for Production of Sub-micron Fibers
Benes Michal M.S. 2002 Improved Properties of Short Fiber Rubber Composites through Nanoscale Co-reinforcement
Bethea Robert M.S. 2014 The Effects of Carbon Black Reinforcement Systems on Crosslinked Shape Memory Elastomers
Bhadauriya Sonal Ph.D. 2019 Relaxation Behaviour of Patterned Composite Polymer Surfaces and Underlying Compensation Phenomenon
Bhaway Sarang Ph.D. 2016 Fabrication of Block Copolymer Templated Mesoporous Metal Oxide Composites for Energy Storage Applications
Bhuva Nihir M.S. 2003 Polymer Blends Comprising Nano-Clay for Enhanced Permeation Barrier in Packaging Applications
Bicakci Jenkins Sirarpi Ph.D. 2000 Miscibility, Uniaxial Deformation Behavior and Annealing Studies in Binary and Ternary Blends of Poly(ethylene naphthalate), Poly(ether imide), and Poly(ether ether ketone)
Birman Vyacheslav Ph.D. 1999 Studies of High Deborah Number Flows of Polymer in Channels and Pipes
Boles David M.S. 1994 The Effect of Mold Cavity Geometry on Orientation Development in Injection Molding of Thermotropic Liquid Crystalline Polymers
Bora Sunil M.S. 1992 Development of a Device for Obtaining Uniform Thickness in Thermoforming of Barrier Materials
Bouscher Robert Ph.D. 2021 Advancements in Powder Coating Processing and in Real-Time Film Formation Analysis of Thermoset Coatings
Brenno Steve M.S. 2004 A Process Route to the Synthesis of Polymer Matrix Nanocomposites with Mixed-Geometry Inclusions
Brostowitz Nicole Ph.D. 2014 Shape Memory Rubber Bands and Supramolecular Ionic Copolymer
Buddhiranon Sasiwimon Ph.D. 2012 Phytochemical Modification of Biodegradable/Biocompatible Polymer Blends with Improved Immunological Responses
Bumm Sug Hun Ph.D. 2010 Mixing Studies and Simulation of Compounding Chopped Fiber and Silica Filler into Thermoplastics in a Modular Co-Rotating Twin Screw Extruder
Cai Feng M.S. 1992 Rubber Modified Copolyester Thermoplastic Elastomer
Cai Liang M.S. 2016 Graft Copolymer Aerogels from Sulfonated Syndiotactic Polystyrene Functionalized with a Quaternary Phosphonium-containing Raft Agent
Cai Zhuoyun M.S. 2018 Influence of Applied Voltage on Dewetting of Polymer Thin Films
Cano Camilo Ph.D. 2005 Polyimide Microstructures from Powdered Precursors: Phenomenological and Parametric Studies on Particle Inflation
Cao Du M.S. 1995 A Study of Elastic Recovery of Rubber Vulcanizates Within Very Short Time Intervals for Dynamic Sealing Applications
Cao Feina Ph.D. 2008 Shape Memory Polyurethane Nanocomposites
CaoJinweiM.S.2014Phase Diagram Approach to Control of Ionic Conductivity and Electrochemical Stability of Solid Polymer Electrolyte Membrane for Li-Ion Battery Application
Cao Jinwei Ph.D. 2018 Bioelectricity Inspired Polymer Electrolyte Membranes for Sensing and Energy Harvesting Applications
Cao Yuanmei Ph.D. 2012 Antireflective Polyimide Based Films
Cardenas Salvador M.S. 2000 Effect of Glass Fibers on the Behavior of LCP/PEI Blends
Carrillo Antonio Ph.D. 2008 Residual Stresses and Birefringence in Gas-Assisted Injection Molding of Amorphous Polymers: Simulation and Experiment
Catignani Umberto M.S. 1996 Molecular Weight Effect on Growth, Nucleation, and Crystallization Rates of I-PP and Predictions of Morphology and Crystallization During Quenching
Cavak Murat M.S. 1999 Fatigue Strength Studies in Polyvinyl Chloride Pipe Joints
Cha Jae Hyug Ph.D. 2001 Polymer Modification with Various Monomers in a Batch Mixer and a Twin Screw Extruder: Experiment and Kinetic Modeling
Chai Qinyuan M.S. 2013 Synthesis and Characterization of Ionically Crosslinked Networks
Chakraborty Ruby Ph.D. 2008 Development of Novel Cycloaliphatic Siloxanes for Thermal and UV-Curable Applications
Chamulitrat Sutin M.S. 1993 Dynamic Vulcanization of Thermoplastic Copolyester Elastomer/Nitrile Rubber Blends: Effect of Curing System
Chandrasekaran Neelakandan Ph.D. 2010 Miscibility, Morphology and Biocompatibility Studies of Novel Hemodialysis Membranes with Enhanced Anti-Oxidant and Anti-Inflammatory Properties
Chang Do-Hoon Ph.D. 2000 Comparison of Reactive Extrusion in Different Continuous Mixing Machines
Chang I-Ta Ph.D. 2012 Excimer Laser Ablation of Polymer-Clay Nanocomposites
Chang Ming-Chi M.S. 1996 Miscibility Phase Diagrams of the Mixtures of Side-On Side-Chain Liquid Crystalline Polymers and Low Molar Mass Liquid Crystals
Chang Sukky Ph.D. 1997 Effect of Chemical Structure on Phase Transition-Rheology-Morphology Relationships in Main-Chain Liquid-Crystalline Polymers
Chang Teng Ph.D. 2015 Studies of Genistein Modified Poly(ether sulfone)/Poly(vinyl pyrrolidone) and Poly(vinyl chloride)/Epoxidized Soybean Oil Blends with Enhanced Blood-compatibility for Biomedical Applications
Chang Young-Wook Ph.D. 1993 Internal Fracture of Rubber Blocks
Chapa Garza Jose M.S. 2013 A Comparative Study of the Morphology of Flow and Spin Coated P3HT:PCBM Films
Chen Cheng-Chung Ph.D. 1992 Influence of Compatibilizers on Morphological and Mechanical Properties of Polymer Blends
Chen Chiu-Yen M.S. 1993 Characterization of Phase Morphologies and Mechanical Properties of Blends of Isotactic Polypropylene and Ethylene Propylene Diene Terpolymer
Chen Haifeng M.S. 1996 Fatigue Strength Studies in Polyethylene Pipe Joints
Chen Hongyan M.S. 2008 Simulations of Shearing Rheology of Thermotropic Liquid Crystalline Polymers
Chen Jianhua Ph.D. 1995 Isothermal Thickening and Thinning Processes in Low-Molecular-Mass Poly(ethylene oxide) Fractions Crystallized From the Melt
Chen Keke Ph.D. 2019 Roll-to-Roll Manufacturing and Real-Time Characterization of Bio-Functional Polymers
Chen Long M.S. 2013 Self Stratifying Coatings
Chen Po Yun M.S. 2020 Role of Ionic Liquid in Electroactive Polymer Electrolyte Membrane for Energy Harvesting and Storage
Chen Shide M.S. 1991 Miscibility and Phase Segregation Studies in Poly-p-phenylene Denzobisoxazole/Polyamides Molecular Composites
Chen Wenhe M.S. 2019 Tribological Interactions between Virgin Hair Fibers at Nanoscale
Chen Xiaocheng M.S. 2017 Synthesis of 10-Carboxy-N-Decyl-N, N'-Dimethydecyl-1-Ammonium Bromide as Organogelator
Chen Yan M.S. 2014 Investigation of Single and Double Network Gels by Maximum Bubble Pressure Rheology
Chen Ying M.S. 2013 Simple Fabrication of Hierarchical Multiscale Patterned Flexible PDMS Film and Ice-retarding Property Study
Chen Ying Ph.D. 2017 Patterning Elastomer, Thermoplastics and Shape Memory Material by UV Lithography and Soft Lithography
Chen Yuxuan M.S. 2015 Morphology Development of Block Copolymer and Homopolymer Blend Films
Chen Zhiyuan M.S. 2018 Novel All-Solid-State Asymmetric Supercapacitors with Metal Selenides Electrodes and Highly Ionic-Conductive Gel Electrolyte
Cheng Yizi M.S. 2017 The Decoupling Behavior between Segmental Dynamics and Conductivity in Polymerized Ionic Liquids
Chidambaram Anand M.S. 1995 Reactive Blending of Waste Rubber with Thermoplastics
Chittavanich Pongsith M.S. 2009 Pigmented UV-Curable Alkyd
Chiu Fang-Chyou M.S. 1991 Basic Studies of Miscibility and Interdiffusion of Vinyl Chloride Polymers and Poly(e-caprolactone) Blends
Chiu Hao-Wen M.S. 1995 Phase Behavior in Mixtures of Side-Chain Liquid Crystalline Polymers and Low Molar Mass Liquid Crystals
Chiu Hao-Wen Ph.D. 1998 Phase Equilibria and Self-Organizing Behavior of Side-Chain Liquid Crystalline Polymer Mixtures
Cho Jae Whan Ph.D. 1998 Development of Phase Morphology in Blending for Modular Co-rotating and Counter-Rotating Twin Screw Extruders
Cho Myung Ho Ph.D. 1991 Structure Development and Deformation Mechanism During Biaxial Stretching of Gelation Crystallized Ultrahigh Molecular Weight Polyethylene Films
Cho Szu-Hao Ph.D. 2020 Facile and Fast Fabricatiion of Functional Thin Films via Polyelectrolyte Layer-by-Layer Assembly
Choi Cheol-Ho Ph.D. 2000 Comparative Study of Structure Development in Melt Processing (polyethylene and isotactic polyolefins: polypropylene, polybutylene and poly-4-methylpentene-1)
Choi Dongman Ph.D. 2002 Structure Development of Polypropylenes of Varying Stereo Forms and Tacticity in Melt Spinning, Tubular Blown Film Extrusion and Injection Molding
Choi Jae Hyuck M.S. 1999 Synthesis of Side Chain Liquid Crystalline Polymer and Phase Separation Behavior and Phase Morphology of LCP/K-21 Mixtures
Choi Jaesun Ph.D. 2013 Ultrasonically Aided Extrusion of Rubber Nanocomposites and Rubber Blends
Choi Jonghan Ph.D. 2001 A Study of Structure Evolution During Deformation and Subsequent Heat-Setting Process in Poly(ethylene terephthalate) and Poly(ether imide) Binary Miscible Blends
Choi Kyungwoo Ph.D. 2001 Processing and Characterization of a Petroleum Isotropic Pitch, a Synthetic Mesophase Pitch, and their Blends for the Preparation of Carbon Fibers and Moldings
Choi Soobum Ph.D. 2003 Rheology, Phase Transition and Morphology of ABA-Type and ABC-Type Triblock Copolymers
Chu Lih-Long M.S. 1991 Experiments and Analysis of Polymerization of Methyl Methacrylate in a Model Twin-Screw Extruder
Chu Lih-Long Ph.D. 1995 Flow Analysis of Polymerization in a Model Twin Screw Extruder
Chu Ming-Hou M.S. 1990 Deformation Behavior and Dynamic Filler-Rubber Interaction of Poly(ethyl Acrylate) and Filled Compounds
Chun Hyunaee Ph.D. 1997 Effect of Molecular Characteristics on Strength of Elastomer
Chun Seung Bum Ph.D. 1999 Morphology of Ternary Polymer Blends Containing a Block Copolymer as Compatibilizing Agent
Chung Oansuk Ph.D. 1998 The Effects of Polymer Selection and Dynamic Vulcanization on the Morphology and Properties of Rubber/Plastic Blends
Churdpunt Ruksakulpiwat Yupaporn Ph.D. 1999 Quiescent and Shear-Induced Crystallization of Ziegler-Natta and Metallocene Based Isotactic Polypropylenes
Cobaj Anisa Ph.D. 2019 The Effects of Urethane Methacrylates on the Film Properties of Acrylic-Urethane Hybrid Latexes
Coben Collin M.S. 2020 Use of Pyrolyzed Soybean Hulls as Fillers in Polyolefins
Costantino Gregory M.S. 1995 Thermal and Pressure Buildup During the Abrasion of Elastomers
Cronin Steven M.S. 1998 The Effect of Composition and Processing Conditions on the Structure Development in Injection Molded Dynamically Vulcanized PP/EPDM Blends
Crowder Matthew M.S. 2017 Rheological Analysis of Uncrosslinked Rubber Compounds and the Characterization of an Apparatus for Forming an Elastomeric Strip
Cui Xiaoyu M.S. 2017 Polycation Reinforced Sulfonated Syndiotactic Polystyrene Gels and Self-Healing Latex Containing Polyelectrolyte Multilayers
Dabke Udayan M.S. 2022 Processing and Engineering Properties of HDPE/Pyrolyzed Soybean Hulls/Carbon Black Composites
Dariush Bahman M.S. 1995 Effect of Fillers on Spin Welding of Polypropylene
Das Pritam M.S. 2004 Internet Controlled Thermoplastic Impregnation of Glass Roving with Pultrusion
Dayal Pratyush Ph.D. 2007 Dynamics and Morphology Development in Electrospinning of Polymer Solutions
Demiray Mehmet M.S. 1996 Effect of Processing Conditions on Crystallinity and Microstructure of Injection Moldings of Polypropylenes of Various Molecular Weights
DengGuodongM.S.2014Self-Assembly of Poly(ethylene oxide)-Block-Poly(ethyl acrylate)-Block-Polystyrene with Phenolic Resins
Deng Guodong Ph.D. 2018 Synthesis and Characterization of Ionically Cross-Linked Networks through the Use of Ion-Pair Comonomer
Deng Jone-Shin Ph.D. 1990 Basic Study of Injection Molding of Rubber Compounds
Deshpande Swati M.S. 2000 Rheological Modeling of Silica Filled SBR
Dharaiya Dhawal M.S. 2002 Studies on Ternary Blends of Polybutylene Terephthalate and Polyamide 6 with Phenoxy Resins
Dharaiya Dhawal Ph.D. 2006 Effects of Nanoclay and Conductive Carbon Black on Morphology Development in Chaotic Mixing of Immiscible Polymers
Diao Bing M.S. 1997 Basic Study of Continuous Ultrasonic Devulcanization of Unfilled Silicone Rubber
Diaz Vela Daniel Ph.D. 2018 Origins and Implications of Translational/Reorientational Decoupling in Bulk and Nanoconfined Glass-Forming Liquids
Ding Ran M.S. 1994 Self-Reinforced Prepregs, Laminates and Injection Moldings of LCP/LCP Blends
Ding Ran Ph.D. 1997 Chemorheology of Filled Rubber Compounds
Dirama Taner M.S. 2002 Processing Behavior of Layered Silicate Nanocomposites in Film Blowing
Dolog Rostyslav Ph.D. 2013 Shape Memory Behavior of Ionomers and Their Compounds
Dong Hui M.S. 2015 Devulcanization of Waste EPDM Rubber and Manufacturing of Polypropylene (PP)/Waste EPDM Thermoplastic Elastomers using Ultrasonically Aided Extrusion
Doni Shashishekhar M.S. 2001 Shear-Induced Migration of Particles in Filled Polymers : Effects on Conductivity and Mechanical Properties
Du Ling Ph.D. 2008 Highly Conductive Epoxy/Graphite Polymer Composite Bipolar Plates in Proton Exchange Membrane (PEM) Fuel Cells
Duan Di M.S. 2016 Organic/Inorganic Epoxy Hybrid Coatings for Anticorrosion Application
Duan Yannan Ph.D. 2012 Fundamental Studies on Polymer and Organic-Inorganic Hybrid Nanoparticles Reinforced Silica Aerogels
Duan Yipin M.S. 2017 Mechanical Properties of Supramolecular Nanocomposite Hydrogels formed by Solution Assembly of Graphene Oxide with Polyelectrolytes
Duran Hatice Ph.D. 2004 Anisotropical Patterned Photopolymerization-Induced Phase Separation of Self-Assembled Nano-Composites with Liquid Crystals and Multi Functional Monomers
Dworak David Ph.D. 2005 Synthesis, Characterization, and Evaluation of Cycloaliphatic Substituted Silane Monomers and Polysiloxanes for Photo-Curable Aerospace Coatings
Dziczkowski Jamie Ph.D. 2008 Advances in Acrylic-Alkyd Hybrid Synthesis and Characterization
Dzienis Drum Krystle M.S. 2010 Mechano-optical Behavior and Structure Development in Nylon MXD6 Films Biaxially Stretched and the Effect on Oxygen Permeability Properties
Ebner Karl M.S. 1992 An Experimental Investigation of Polypropylene Degradation in Different Processing Machines
Echeverri Mauricio Ph.D. 2012 Phase Diagram Approach to Fabricating Electro-Active Flexible Films: Highly Conductive, Stretchable Polymeric Solid Electrolytes and Cholesteric Liquid Crystal Flexible Displays
Emami Fatemesadat Ph.D. 2013 Thermodynamically Consistent Interatomic Potentials for Silica to Design Specifically Binding Peptides: Role of Surface Chemistry, pH, and Amino Acid Sequence
Erden Numan M.S. 2009 Polyurethane-Polybenzoxazine Based Shape Memory Polymers
Ertekin Ayca Ph.D. 2008 Analysis of Wetting, Flow and Final Properties of Resin Transfer Molded Epoxy-Glass Fiber Composites Enriched with Nanoscale Reinforcements
Extrand Charles Ph.D. 1990 Surface Studies of Polymers
Famili Navid Ph.D. 1991 Viscoelastic Modeling of Injection Molding of Thermoplastics
Fan Shaobin Ph.D. 2000 Macroscopic Phase Decomposition in Block Copolymers Driven by Thermooxidative Reactions
Fan Xiyun Serene Ph.D. 1991 Rheological Properties and Model for Particle Filled Polymer Melts
Farrell Erin Ph.D. 2021 Development of Emulsion-Templated Polyimide Aerogel Monoliths and Sheets
Fei Pengzhan Ph.D. 2013 Investigation of a Side-Chain Crystalline Shape Memory Block Copolymer and Maximum Bubble Pressure Rheology of Organogels
Feng Chenrun M.S. 2017 Physical and Electrochemical Investigations of Various Dinitrile Plasticizers in Highly Conductive Polymer Electrolyte Membranes for Lithium Ion Battery Applications
Feng Jiawei M.S. 2017 Compatibility and Shape Memory Effect Study of Maleated Ethylene Propylene Copolymer(MAn-g-EPM)/Fatty Acid Blends
Feng Lei Ph.D. 2013 Synthesis and Characterization of Ionically Bonded Diblock Copolymers
Feng Li Ph.D. 2012 Investigation of the Relationships between the Thermodynamic Phase Behavior and Gelation Behavior of a Series of Tripodal Trisamide Compounds
Feng Wenlai Ph.D. 2004 The Reclaiming of Butyl Rubber and In-Situ Compatibilization of Thermoplastic Elastomer by Powerful Ultrasound
Feng Yixiao M.S. 2018 Zinc Aluminum Phosphate Pigmented Polyurethane/Polysiloxane Coatings for Anticorrosion
Festa Daniel M.S. 1993 The Instrumented Spin Welding of Filled and Unfilled Thermotropic Liquid Crystalline Polymer
Fiorentini Francesca Ph.D. 2004 Fundamentals of Structuring During Mixing and Deformation of Rubber Compounds Studied by Real Time Sensing Techniques
Fong Dinghuei M.S. 2005 Finite Element Analysis of Compressive Stress Relaxation in Ethylene/Acrylic Elastomer
Fong Yat-Pui M.S. 1999 Evaluation of Phase Morphology and Dispersion of Polymer Blends with Ultrasound Waves
Fonner Adam M.S. 2019 An Investigation on Syndiotactic Polystyrene Aerogel Coating of Macroporous Fabric via Dip Coating Method
Fotoohi-Ghiam Farid M.S. 1990 Injection Molding of Polymer Blends
Fu Guopeng M.S. 2013 Molecular Complexation and Phase Diagrams of Urea/Polyethylene Glycol Mixtures
Fu Guopeng Ph.D. 2017 Investigation on Structure-Property Relationships in Highly Ion-Conductive Polymer Electrolyte Membranes for All-Solid-State Lithium Ion Batteries
Fu Qiang M.S. 2017 Polymer-templated Crystallization of Perovskite Film and Conductive Ionomer Doped Perovskite Film for High Performance of Perovskite Solar Cells
Fu Xuewei M.S. 2015 Graphene/V2O5 Hybrid Aerogels as Electrode Materials for Electrochemical Capacitors
Fu Yao-Tsung Ph.D. 2011 Molecular Simulation of Dispersion and Mechanical Stability of Organically Modified Layered Silicates in Polymer Matrices
Fujiyama-Novak Jane Ph.D. 2009 The Rolel of Nanoclay on the Deformation Behavior of Polypropylene/Maleic Anhydride Modified Polypropylene Films and Fibers in Full and Partially Molten State Processing
Gagov Atanas Ph.D. 2007 Instabilities in Elongation Flows of Polymers at High Deborah Numbers
Gaikwad Sanjeev M.S. 1994 A Study of Dynamic Vulcanization of Polycarbonate and Fluoroelastomer Blends
Galle Fred M.S. 1997 Experimental Study of Flow Mechanisms and Mixing in a Kobe Steel Nex-t Continuous Mixer
Gao Tongzhai Ph.D. 2014 Anticorrosive Organic/Inorganic Hybrid Coatings
Gao Xiang Ph.D. 2017 Ultrasound Assisted Extrusion and Properties of Polycarbonate/Carbon Nanotubes Composites and Cast Films
Garcia Buduen Romny M.S. 2013 Evaluation of the Role of Hydrodynamic Shear on Breakage of Thermally Conductive Particles during Compound Preparation
Garcia-Ramirez Rafael M.S. 1991 The Effect of a Mobile Boundary on the Extrusion of Polymers
Garza-Lopez Tito M.S. 2000 Ablation and Adhesion Behavior Evaluation of Polypropylene Backed Pressure Sensitive Adhesive Tapes Using the Excimer Laser
Gautam Keshav M.S. 1999 Optoelectronic Studies on Novel Conjugate Polymer Systems
Geng Yan M.S. 2013 Emulsion Polymerized Monodisperse Silica-Polymer Core-Shell Nanoparticles for Antireflective Coatings
Gerrard David Ph.D. 2000 Dynamic and Kinematic Effects in the Friction and Wear of Rubber
Getzie Travis Ph.D. 2012 Magneto-Optical and Rheological Behaviors of Oil-Based Ferrofluids and Magnetorheological Fluids
Ghanem Mahmoud M.S. 2004 The Effect of Processing Conditions on the Structural Gradients Developed in Injection Molded Bacterial Poly (3Hydroxy Butyrate-Co-3Hydroxy Valerate) Parts
Ghose Belcher Sayata Ph.D. 2004 Recycling of Polyurethane Rubber and Foam by the Application of High Power Ultrasound
Ghosh Monoj Ph.D. 2016 Fabrication of Inorganic Oxide Nanofibers using Gas Jet Fiber Spinning Process and their Applications in Photocatalytic Oxidation
Ghosh Sudip M.S. 1994 Crystallization Behavior and Processing-Structure-Property Relationship in Binary Blends of PPS
Gintert Michael Ph.D. 2007 A Novel Approach to Obtain High Performance Layered Silicate Thermoset Polyimide Matrix Nanocomposites
Glogovsky Todd M.S. 1991 A Model of Stress Softening for a Carbon Filled Rubber
Gmerek Michael M.S. 1993 Shear-Induced Crystallization in Injection Molding of Thermoplastics: Modeling and Experiment
Gomatam Rajesh Ph.D. 2002 Modeling Fatigue Behavior of Electronically Conductive Silver Filled Adhesive
Gong Ziyuan M.S. 2019 Effect of Sodium Dodecyl Sulfate on the Structure and Rheological Properties of Pluronic F108 - Poly(acrylic acid) Coacervates
Gowrishankar Sunil M.S. 1999 Stiffness and Vibrational Behavior and Design of Composite Cylindrical Helical Springs Manufactured using Filament Winding
Graves David M.S. 1998 On-Line Measurements of Crystallization of Low Density Polyethylenes Using Integrated Fiber Optic Laser Raman Spectroscopy, Light Depolarization and Small Angle Laser Light Scattering Techniques
Grolman Danielle Ph.D. 2017 Self-Organization and Controlled Spatial Distribution of Cellulosic Nanofillers in Polymer Thin Films
Gu Chang-Il Ph.D. 2000 Reactive Blending of Treated Waste Rubber With Polyamides and Their Monomer
Gu Senlong M.S. 2013 Effect of Polybenzoxazine on Properties of Shape-memory Polyurethanes with Glassy and Crystalline Soft Segments
Gu Senlong Ph.D. 2016 Building Blocks and Their Effects on Polymer Aerogel Properties
Gu Zipeng M.S. 2018 Emulsion Templated Polyimide Aerogel Foam and Hybrid Aerogel Foam as Absorbents for Oil Cleanup
Guenthner Andrew Ph.D. 2000 Evaporation-Induced Solidification and Morphology Development in Polymer Fibers and Films
Guha Abhishek M.S. 2003 Synthesis and Characterization of Polypropylene Microfibers Containing Carbon Nanofibers and Single Walled Carbon Nanotubes
Guhathakurta Soma Ph.D. 2009 Anhydrous State Proton and Lithiium Ion Conducting Solid Polymer Electrolytes Based on Sulfonated Bisphenol-a-poly(Arylene Ethers)
Gunes Ibrahim Sedat Ph.D. 2009 Analysis of Shape Memory Properties of Polyurethane Nanocomposites
Gunes Kaan Ph.D. 2009 In-Situ Ultrasonic Compatibilization of Binary Blends of Flexible Chain Polyesters and Wholly Aromatic Liquid Crystalline Polymers
Guo Hao M.S. 2018 Role of Chemical Surface Preference in Translational and Reorientational Nanoconfinement
Guo Jiao Ph.D. 2010 Development of Ion Conductive Polymer Gel Electrolytes and Their Electrochemical and Electromechanical Behavior Studies
Guo Xiaoping Ph.D. 1999 Crystallization, Microstructure, Residual Stresses and Birefringence in Injection Molding of Semicrystalline Polymer: Simulation and Experiment
Guo Yingmin M.S. 2016 Continuous Ultrasonic Process for Devulcanization of Rubbers Suitable for Incorporation in New Tires
Guo Yuanhao M.S. 2013 Reinforcement of Hydrogels by Nanofiber Network
Guo Yuanhao Ph.D. 2016 Functional Polymer Film Roll-to-Roll Manufacturing by Field Assisted Alignment of Nanoparticles/Phases in Thickness "Z" Direction
Guo Yuelei M.S. 2018 Investigation of Silicone Rubber Blends and Their Shape Memory Properties
Guo Yuewei M.S. 2021 Variation in the Properties of Ionomers Synthesized by Ionic Functionalization Pre- and Post-Polymerization
GuptaSahilPh.D.2014Structure-Property Relationships in Polymers for Dielectric Capacitors
Guzman Gustavo Ph.D. 2016 Bimodal Amphiphilic Polymer Con etworks: Structure-Property Characterization, Processing and Applications
Ha Seung-Kyu M.S. 1997 Continuous Polymerization and Copolymerization of Lauryl Lactam in a Modular Intermeshing Corotating Twin Screw Extruder
Halthore Ramprasad M.S. 1999 Study on the Effect of Pigments on Mechanical Properties of Injection Molded Polypropylene
Han Min M.S. 1990 Wall Slip of Rubber and Rubber Compounds: Influence of Materials of Construction and Additives
Han Peter M.S. 1991 A Fundamental Study of the Rheology and Mold Filling of Sheet Molding Compounds
Han Peter Ph.D. 1995 A Basic Study of the Rheological Properties of Structurally-Complex Polymer Systems Including Thermoplastic Elastomers
Hasheminasab Sayyed Abed M.S. 2020 Bismaleimide Methacrylated Polyimides-Polyester Hybrid UV-Curable Powder Coating
Hassan Mohamed Ph.D. 2004 Novel True Stress-True Strain-Birefringence Measurement Systems for Real Time Measurement During Biaxial Stretching and Heat Setting Polymer Films "Application on PET Films
Havet Guy Ph.D. 2000 Experimental Investigation and Modeling of the Rheology of Silica-Polystyrene Mixtures
HayirliogluArzuPh.D.2014Directed Assembly of Block Copolymer Films via Surface Energy Tunable Elastomers
He Chunxia M.S. 1999 Studies of Flows of Polyisobutylene in Long Circular and Square Dies
He Fang M.S. 1997 Fatigue and Stress Relaxation Behavior of High-Density Polyethylene
He Lijuan M.S. 1997 Viscoelastic Behavior of Narrow Molecular Weight Distributed Polybutadienes
He Ruixuan Ph.D. 2016 Studies on Ionic Conductivity and Electrochemical Stability of Plasticized Photopolymerized Polymer Electrolyte Membranes for Solid State Lithium Ion Batteries
He Zhouying Ph.D. 2015 Organic/Inorganic Hybrid Coatings for Anticorrosion
Hill Marko Meagan M.S. 2005 Adding Value to Recycled Polyethylene Through the Addition of Multi-Scale Reinforcements
Hindi Majid Ph.D. 1989 Mechanochemical Fatigue and Heat Build-Up in Elastomers
Hindi Rick M.S. 2001 Thermomechanical Analysis of a 2 Ply Composite Laminate Test: Investigation of Damage Evolution from Socketing to Bridging
Hinojosa-Falcon Luis M.S. 2003 Plasticization and Stabilization Effects on the Mechanical and Thermal Properties of Plasticized PVC Nanocomposites
Hong Chang Kook Ph.D. 2001 The Application of Powerful Ultrasound to Devulcanization of Rubbers and Compatibilization of Polymer Blends
Hong Chang Min Ph.D. 2005 Investigation of Shear-Induced Migration of Filler Particles in Molding Flows
Hong Myeong-Ho Ph.D. 2004 Structure Development of Cyclopolyolefins and Polystyrenes in Melt Spinning and Film Stretching Process
Hong Myung-Hyuk Ph.D. 1997 Theoretical and Experimental Studies in Modular Intermeshing Counter-Rotating Twin Screw Extruders
Howard Faith M.S. 2001 Reactive Dispersion of Waste Ground Rubber With Polyolefin
Hoy Thomas M.S. 2016 Optimizing Solvents for a Quinary System
Hsiung Chang-Meng Ph.D. 1990 Processing-Structure-Property Relationship and Simulation of Structure Gradients in Injection Molding of Semi-Crystalline Aromatic Polycondensates
Hu Benfei M.S. 1992 Theoretical and Experimental Study of Internal Mixers
Hu Peng M.S. 1996 Racheting of Polyethylene Pipe
Hu Yongan Ph.D. 2023 Study of Urethane Methacrylates in Acrylic Latexes: The Effect of Bulky Alkyl Terminal Groups and Self-Healing Behavior
Hu Yongan M.S. 2019 Influences of Monomer Hydrophobicity on Secondary Nucleation in Emulsion Polymerization
Hu Yupeng M.S. 2015 Electrospun Nanofibers for Programmable Drug Delivery System Sequentially Targeting Inflammation and Infection
Huang Chongwen Ph.D. 2016 Rheology of Oligomeric Sulfonated Polystryene Ionomers
Huang Keyuan Ph.D. 2015 Decrosslinking of Crosslinked Polyethylene via Ultrasonically Aided Extrusion
Huang Rundong M.S. 2020 Tribological Behavior of Ionic Liquid Nanoconfined between Hydrophilic and Hydrophobic Surfaces
Huang Shifeng M.S. 2019 Investigation of Interfacial Dynamics Between Active Surfaces Ranging from Soft Biomacromolecules to Hard Inorganic Surfaces
Huang Shuyue M.S. 2018 Coacervation and Phase Behavior of Aqueous Solutions of Oppositely Charged Polyelectrolytes
Huang Tsang-Min Ph.D. 2010 Phase Equilibria of Mesophase Transitions in Binary Liquid Crystal Mixtures Involving Induced Ordered Phases
Huang Wenyi Ph.D. 2006 Synthesis, Characterization and Rheology of Functional and Heterocyclic Liquid-Crystalline Polymers
Huang Yeong-Hua Ph.D. 1991 One- and Two-Dimensional Channel Flow of a Viscoelastic Plastic Material: Simulation and Experimentation
Huang Yiyun M.S. 1995 Self-Reinforced Prepregs, Laminates and Injection Moldings of HDPE/LCP Blends
Huang Zixu M.S. 2018 Flexible Perovskite Hybrid Solar Cells Through Organic Salt Treated Conducting Polymer as the Transparent Electrode
Huarng Jyh-Chiarng M.S. 1987 Miscibility and Morphology Studies for Ternary Blends
Hung Jui-Hsiang Ph.D. 2018 Efficient Computational Strategies Enabling Insights into the Glass Transition
Huq Abul Ph.D. 2015 Interfacial and Solvent Processing Control of Phenyl-C61-Butyric Acid Methyl Ester (PCBM) Incorporated Polymer Thin Films
Hutjens Charles M.S. 2013 Morphology Control for Model Block Copolymer/Nanoparticle Thin Film Nano-Electronic Devices on Conductive Substrates
Ihm Dong Joon Ph.D. 1994 Compatibilization, Morphology and Mechanical Properties of Polyethylene Terephthalate/Polyethylene Blends
Isayeva Irada M.S. 1997 Studies of Miscibility, Crystallization and Structure-Property Relation of Blends of Two Semicrystalline Polymers: Poly(vinylidene fluoride) and Poly(1.4-butylene adipate)
Iskander Suzette M.S. 1994 Blends of Copolyester Thermoplastic Elastomer with Nitrile Rubber
Jadhav Sainath Ph.D. 2022 Development of an Epoxy Mixed-Matrix Composite System Using an Ionic Liquid-Based Coordination Polymer
Jaeger Tamara Ph.D. 2020 Insights into Physical Aging of Thermally-quenched and Solvent-cast Polymers from Molecular Dynamics Simulation
Jain Sachin M.S. 2000 Nanocomposites of High Performance Thermoplastic Polymers Using Epoxy as Processing Aid
Jarukumjorn Kasama Ph.D. 1999 On-Line Monitoring of Grafting Monomers onto Low Density Polyethylene in a Model Twin Screw Extruder by Fiber Optic Raman Spectroscopy
Javadi Ali Ph.D. 2017 Methacrylated Poly(ethylene Glycol)s as Precursors for Superplasticizers and UV-Curable Electrical Contact Stabilization Materials
Jenkins John M.S. 2007 Ultrasonic Decrosslinking of Crosslinked Polyethylene
Jeong Jae-Hyeuk Ph.D. 2003 A Study of Complex Channel Flows of Polymer Melts
Jeong Jisoo Ph.D. 2023 Sulfur Cathodes and Silicon Anodes for High-Energy Density and High-Power Density Applications: The Way to the Next Generation Batteries
Jeung Soondeuk Ph.D. 2005 The Studies of Polyurethane and Polyethylene Oxide Electrolites with Various Salts
Jha Kshitij Ph.D. 2012 Polarization and Self-Assembly at Metal-Organic Interfaces: Models and Molecular-Level Processes
Ji Shuxin M.S. 2017 Electrostatically Active Aerogels for Air Filtration and Synthesis of Syndiotatic Polystyrene Aerogel Microparticles
Ji Xiang M.S. 2016 The Influence of Assembly pH and Clay Inclusion on the Actuation of Polyelectrolyte Multilayers
Jian Pei-Zhen Ph.D. 2019 Fabrication of Solvent and Temperature Sensitive Polymer Bilayer Bending Actuators
JiangFanhuiM.S.2014Real-Time Optical and Mechano-Optical Studies during Drying and Uniaxial Stretching of Polyetherimide Films from Solution
Jiang Haowei M.S. 2018 Time-Salt Superposition in Polyelectrolyte Complexes and Enhanced Mechanical Properties of Three-Dimensional Printing by Core-Shell Structured Thermoplastics
Jiang Qibo Ph.D. 2008 Modeling Flow, Melting, Solids Conveying and Global Behavior in Modular Intermeshing Counter-Rotating Twin Screw Extruders
Jimenez Guillermo Ph.D. 2007 Characterization of PMMA and TPU Carbon Nanofiber Composites Produced by Chaotic Mixing
Jin Chenxi M.S. 2020 Fabrication of Non-Spherical Polyimide Aerogel Microparticles
Jin Weize M.S. 2015 Relative Alignment of CZA (Cold Zone Anneal) Polymerm in Nano Imprinted Films
Joo Minjung Ph.D. 2016 Silane Terminated Macromonomers with Nanoparticles and Surface Segregation of Fluorinated Moieties
Joshi Prashant Ph.D. 1999 Viscoelastic Modeling of Filled, Crosslinked Rubbers
Jung Chang Do Ph.D. 2005 Synthesis of Thermoplastic Polyurethanes and Polyurethane Nanocomposites Under Chaotic Mixing Conditions
Jung Ho-Chul Ph.D. 2004 Investigation of Melting in Modular Intermeshing Co-Rotating Twin Extruder
Kadota Masanori M.S. 1997 The Evolution of Structural Hierarchy in Co-Injection Molded Polystyrene Polypropylene Polymer Pairs
Kaewpanya Magaraphan Rathanawan M.S. 1993 Adhesion of High Density Polyethylene and Polypropylene
Kalan Steven M.S. 2011 Surface Modification of Silicon Through Thermal Annealing and Rinsing of Solvent Cast Polystyrene Films
Kalkan Zehra Ph.D. 2006 Generation of Advanced Polyamide-6,6 Nanocomposites via Interfacial Polycondensation
Kalvani Bimal M.S. 1991 An Investigaton of EMI Shielding Composites Made By Incorporating Low-Melting Point Metals into Thermoplastics
Kamruzzaman Mohammad M.S. 2003 An Investigation of Harmonic Properties of Carbon Nanotubes and Their Hexagonal Arrays
Kang Ho-Jong Ph.D. 1989 Structure Development and Dynamics in Double Bubble Tubular Film Processing
Kanuga Karnav Ph.D. 2006 A Fundamental Study on the Non-Linear Mechano-Optical Behavior of Polyethylene Naphthalate, Its Blends with Polyetherimide and its Nanocomposites
Karmarkar Uday M.S. 2000 Mechanical Adhesion Analysis of Multi-Stepped Double Scarf Joints with Void and Disbond Effects
Ke Linping Ph.D. 2010 Dispersion Characteristics of Nanocomposites Based on Functionalized Block Copolymers
Keawwattana Wirunya Ph.D. 2002 Phase Behavior, Crystallization and Morphological Development in Blends of Polypropylene (PP) Isomers and Poly (Ethylene-Octene) Copolymer
Keuchel Kenneth M.S. 1994 Instrumented Spin Welding of Polypropylene
Keum Jongmin Ph.D. 2004 Engineering Analysis of Devolatilization and Reactive Processing
Khanolkar Amit M.S. 2000 Effect of Interfacial Weight Loss by Silver Migration on the Pull-Out Strength of Silver Wire Embedded in an Adhesive Matrix
Kiehl Christopher M.S. 1992 Nondestructive In-Line Monitoring of the Polymerization of Methyl Methacrylate with Ultrasound
Kim Byong-Jun Ph.D. 2002 Reactive Extrusion of E-Caprolactone Polymers and Application of Poly(Lauryl-B-Caprolactone) as a Compatibilizing Agent in Blends Containing Poly(Vinyl Chloride)
Kim Byoungjoo Ph.D. 1996 Studies of Thermal/Peroxide Induced Degradation and Maleation of Polypropylene in a Modular Intermeshing Twin Screw Extruder
Kim Do Ph.D. 2003 Phase Equilibria and Dynamics of Thermally Induced and Polymerization-Induced Phase Separations in Main-Chain Liquid Crystalline Polymer Mixtures
Kim Dong-Ok Ph.D. 2000 Effect of Pendent Side Groups on the Rheology, Mesophase Structure, Molecular Packing, and Conformational Properties of Thermotropic Liquid-Crystalline Polymers
Kim Eung Gun M.S. 1991 Plastic Effects in Peeling Polyethylene Films
Kim Eung Kyu Ph.D. 2000 Investigation of Transient Flow and Element Analysis in Modular Intermeshing Co-Rotating Twin Screw Extruders
Kim Hyunjung M.S. 1997 Mechanical Behavior and Adhesion of Block Copolymer/Polystyrene Pairs
Kim In Ph.D. 2004 Development of New Generation of Copolymers via Reactive Extrusion in a Twin Screw Extruder and Application in Various PVC Blends
Kim Jeong-Cheol Ph.D. 1995 The Influence of Processing History on Structural Characteristics of Poly(ethylene 2,6 naphthalene dicarboxylate) and Poly(ether imide) Blends
Kim Jin Kuk Ph.D. 1990 Analysis of Flow and Mixing in an Internal Mixer with Different Rotor Designs
Kim Jongdae Ph.D. 2004 A Study of Structure Formation on PET, PBT, and PS Surfaces by Excimer Laser Ablation
Kim Kwang-Jea Ph.D. 1998 Rheology, Processing, and Characterization of Isotropic, Anisotropic, and Mixed Particle Filled Polymer System
Kim Kyuk Hyun Ph.D. 2004 Flow Induced Crystallization and Birefringence Development of Semicrystalline Polymers in Injection Molding and Fiber Spinning Process
Kim Myung Hwan Ph.D. 1990 Theoretical and Experimental Studies of Flow Behavior in Modular Non-Intermeshing Counter-Rotating Twin Screw Extruders
Kim Nam Hyung Ph.D. 2009 Injection-Compression and Co-Injection Moldings of Amorphous Polymers: Viscoelastic Simulation and Experiment
Kim Namil Ph.D. 2010 Photoisomerization- and Photopolymerization-induced Phase Trnasitions in Mixtures of Photoresponsive Chromophores and Reactive Mesogens
Kim Pan Jong Ph.D. 1993 Flow Visualization and Study of Chemical Reactions in a Modular Intermeshing Co-Rotating Twin Screw Extruder
Kim Pan Soo Ph.D. 1996 Flow and Mixing Characteristics in an Intermeshing Counter-Rotating Rotor Internal Mixer
Kim Seok-Ho Ph.D. 1998 Continuous Ultrasonic Devulcanization of Sulfur Cured SBR Vulcanizates
Kim Sung Jun Ph.D. 2016 Monolithic Aerogels and Their Applications in Airborne Nanoparticle Filtration
Kim Won-Ho Ph.D. 1992 Local Deformation of Rubber Seals
Kim Won-Kook M.S. 1993 Phase Behavior and Dynamics of Phase Separation in a Mixture of Polystyrene and Liquid Crystal
Kim Younghoon Ph.D. 2004 A Study of Polymer/Clay Nanocomposite Formation by Melt-Intercalation Process
Ko Che-Chian Ph.D. 1994 Phase Separation and Chemical Reactions in Blends of Polycarbonate with Polymethyl Methacrylate Isomers
Ko Dong-Hwi M.S. 1991 Enhancement of Electrical Properities of Uniaxially and Biaxially Processed Poly-p-phenylene Sulfide Film
Kochar Lalit Singh M.S. 1986 High Pressure Vulcanization of Elastomers
Konishi Yuma M.S. 2004 Nanoparticle Induced Carbon Black Network Self-Assembly and Structural Hierarchy Development in Injection-Molded Conductive Composites
Koombhongse Piyawit Ph.D. 2001 Phase Behavior and Morphology of SAN/PMMA Under High Flow Rates
Kothari Suri Shipra M.S. 2000 Vulcanization Induced Phase Separation in Blends of Syndiotactic Polypropylene and Metallocene Catalysed Ethylene Propylene Diene Terpolymer
Kumar Rishi Ph.D. 2010 Manufacturing of Polymer Nanocomposites Containing Carbon Nanotubes and Carbon Nanofibers Using Ultrasound Assisted Extrusion Process
Kumar Sumeet M.S. 1998 Selective Use of Rubber Toughening to Optimize Lap Joint Strength
Kuttappa Sanjay M.S. 1994 Static and Dynamic Characteristics of Rubber Compounds
Kuznicki Jason M.S. 2005 Water Uptake and Fracture Behavior of Epoxy/Clay Nanocomposites Used for Bonding Granite
Kwa Teik Lim M.S. 2006 Development of On-Line True Stress-Strain-Electrical Conductivity Uniaxial Tensile Stretching Measurement System & its Utility in Thermo-Mechano-Electrical Behavior of Carbon Black (CB) Filled PolyLactic Acid (PLA), Binary & its Nanoclay (NC) Ternary Nano
Kwak Seung-Yeop M.S. 1989 PVC-Plasticizer Interaction in Plastisol Processing: Effect of the Homologous Series of Plasticizers on Gelation and Fusion Behavior
Kwak Seung-Yeop Ph.D. 1992 Investigation of Morphology on Progress of Mixing PVC With Different Polymers: Structure and Mechanical Behavior After Mixing
Kwon Keehae Ph.D. 2005 Anisotropic Shrinkage in Injection Moldings of Semicrystalline and Amorphous Polymers: Simulation and Experiment
Kwon Youngdon Ph.D. 1994 Studies of Viscoelastic Constitutive Equations and Some Flow Effects for Concentrated Polymeric Fluids
Kye Daniel Ph.D. 2022 Towards Designing of Polymeric Latent Humidity Sensor
Kye Hyoungsan Ph.D. 1995 Continuous Polymerization of Caprolactam and Reactive Blending in a Modular Intermeshing Corotating Twin Screw Extruder Integrated with Polyamide Fiber Melt Spinning
Lai Sun-Mou Ph.D. 1993 Effect of Interfacial Bonding on the Strength of Adhesion
Lai Tzu-Yu Ph.D. 2020 Phase Behavior Study and Thermoresponsive Bilayer Fabrication of Organogels
Lalgudi Basker M.S. 2000 An Experimental Investigation of Rheology and Chemorheology of Styrene Butadiene Rubber (SBR) and Natural Rubber (NR)
Lang Ryan M.S. 2013 Nanoconfinement Effects on the Glass Transition: A Study of Nanolayered and Freestanding Coarse-Grain Polymer Films
Laokijcharoen Pasaree Ph.D. 2000 The Phase Morphology of Blends of Natural Rubber with Crystalline Hydrocarbon Plastics
Lapshin Sergey Ph.D. 2006 Experimental and Theoretical Study of Polyolefin-Clay Nanocomposites Prepared Using High Power Ultrasound
Larentzos Rubino Evangelia M.S. 2000 The Effect of Ground Silica Fillers on the Processing Properties of Silicone Compounds
Lazarenko Daria Ph.D. 2022 Understanding Bulk and Interfacial Behavior of Ionic Liquids-Containing Fluids Using Predictive Computational Tools
Lee Byoung Jo Ph.D. 2009 Nucleating Agent-Assisted Preparation of Polypropylene (PP)/Polyhedral Oligomeric Silsesquioxane (POSS) Nanocomposites and Their Characterization
Lee Byung-Hwa Ph.D. 2001 Experimental and Theoretical Studies of Reactive Extrusion Process in Twin Screw Extruders: Formation of Polycaprolactam and Block Copolymers
Lee Dong Jae Ph.D. 1998 Experimental and Theoretical Study of Sandwich Injection Molding Process
Lee Eon-Seok Ph.D. 1997 Influence of Fluoropolymers on the Extrusion Characteristics of Thermoplasltic Melts
Lee Hak-Soo Ph.D. 1991 Thermodynamics and Kinetics of Phase Separation in Functional Prepolymer Mixtures and Networks
Lee Jaehyung Ph.D. 1999 Dynamics of Polymerization Induced Phase Separation in Reactive Polymer Blends
Lee Je-Kyun Ph.D. 1998 Morphology Evolution in Polymer Blend During Compounding and Subsequent Processing
Lee Jehoon Ph.D. 2017 Synthesis, Characterization, and Applications of the Low Cross-Link Density Poly Acrylate Elastomers using Direct Reversible Addition Fragmentation Chain Transfer Cross-Linker
Lee Jeong Ph.D. 1991 Fundamental Properties and Structure Development in Solid State Processed Vinylidene Fluoride/Trifluorethylene Copolymers
Lee Jeongwoo Ph.D. 2015 Porous Carbon/TIO2 Composites as an Anode of Sodium Ion Batteries
Lee Keun Yong Ph.D. 2005 Structure and Properties of Polymer Blend Nanocomposites
Lee Kyung Min Ph.D. 2002 Phase Transition, Rheology, and Morphology of Block Copolymers and Side-Chain Liquid-Crystalline Polymers
Lee Nam Seok M.S. 1990 Miscibility of Blends of CIS-1,4 Polyisoprene-Butadiene-Styrene Copolymers and Polybutadiene
Lee Seung Wook M.S. 1992 Fundamental Studies on Crystallization Kinetics and Necking Behavior of Polyethylene 2,6-Naphthalate
Lee Shi-Ho Ph.D. 1996 Influence of Viscosity Ration on Mixing and Melting of Immiscible Polymer Blends in a Modular Intermeshing Corotating Twin Screw Extruder
Lee Sung-Duk M.S. 1989 Critical Comparison of Methods of Measurement of Carbon Black Dispersion in Rubber Compounds
Lewis Elizabeth Ph.D. 2020 Aging of Thin Glassy Polymers Probed by Ellipsometry and Mechanics
Lewis Ivor M.S. 1992 Rheological and Process/Mechanical Properties of Estaloc Polyurethane
LewisToddPh.D.2014Carbon Nanotube Composites Prepared by Ultrasonically Assisted Twin Screw Extrusion
Li Bohao M.S. 2013 Room Temperature Processed Molybdenum Oxide Thin Film as a Hole Extraction Layer for Polymer Photovoltaic Cells
Li Chao M.S. 2016 Tunable West Adhesion in Polyelectrolyte Multilayers
Li Cheng M.S. 2018 Synthesis of Ionically Crosslinked Polyelectrolytes by Homopolymerization of an Ion-Pair Comonomer
Li Chengtao Ph.D. 2003 Two Component Co-Injection and Transfer Molding and Gas-Assisted Injection Molding of Polymers: Simulation and Experiment
Li Guo M.S. 1995 Kinetics of Quiescent and Shear-Induced Crystallization: Molecular Weight Effects
Li Hang M.S. 1999 Structure Development in Melt Spinning Filaments and Biaxially Stretched Films from Poly(Butylene Terephthalate) Based TPE's
LiJiaxiM.S.2014Modified Soybean Oil-Extended SBR Compounds and Vulcanizates
Li Jiaxi Ph.D. 2017 Toward Replacement of Petroleum Plasticizer by Modified Soybean Oil in Rubbers
Li Jingyu M.S. 2015 A Novel µ-Fluidic Channel Assisted Encapsulation Technique for Layer-by-Layer Polymer Nano- and Microcarrier Fabrication
LiJiaxiM.S.2014Modified Soybean Oil-Extended SBR Compounds and Vulcanizates
Li Li Li M.S. 1995 Effects of Particulate Filler Type, Size and Surface Treatment on Rheological Behavior of Filled Rubber Compounds
Li Mingzhe M.S. 2014 Mechanical Properties and Swelling Behavior of BPEI-Metal Ion/PAA Polyelectrolyte Multilayer Films
Li Ran M.S. 2020 Research on Highly Conductive Solid-State Electrolyte Membrane and New Electrode Binder (FLEP 60) in Polymer Electrolyte Lithium Ion Half Cells
Li Sinan Ph.D. 2007 Design and Construction of Nanoarchitectural Metal Derivatives-Carbon Nanotype Hybrids
Li Tong M.S. 2015 Terrace Phenomenon of Block Copolymers (BCPs) via Cold Zone Annealing (CZA)
Li Wenhao M.S. 2019 Preparation of Janus Nanoparticles and its Application in Oil Industry
Li Wenqi M.S. 2014 Orderly Perforation of Polyester Films by Excimer Laser
Li Xindi M.S. 2018 Modification of Sulfonated Syndiotactic Polystyrene Aerogels Through Ionic Interactions
Li Yifan M.S. 2016 High Performance Perovskite Hybrid Solar Cell via Interfacial Engineering
Li Zhehui M.S. 2013 Barium Oxide as an Intermediate Layer for Polymer Tandem Solar Cell
Li Ziyan M.S. 2020 High Temperature Resistant Polyimide for UV Curable Powder Coatings
Liang Songxin M.S. 1998 Phase Behavior in Mixtures of Smectic-LC/polymer, Nematic-LC/polymer and Smetic-LC/side-on side-chain Liquid Crystalline Polymer
Liang Tian M.S. 2013 Continuous Devulcanization of Ground Tire Rubber of Different Particle Sizes Using an Ultrasonic Twin-Screw Extruder
Liang Tian Ph.D. 2017 Structure and Properties of Rubbers and their Blends Manufactured with Ultrasonically Assisted Extrusion
Liang Yi Cheng Ph.D. 2000 Experimental and Theoretical Study of Self-Reinforced Polypropylene/LCP Blends
Lim Dong-Soo Ph.D. 1991 Miscibility and Dynamic Behavior of Phase Decomposition in Binary Mixtures of Polycarbonate and Poly(methyl Methacrylate) Stereoisomers
Lim Soon-Ho Ph.D. 1991 Particle Orientation Development and Directional Growth Phenomena in Processed Filled Thermoplastic Compounds
Lin Che-Kuan Ph.D. 2022 Inhibition of Free Radical Cured Thermosetting Acrylic Coatings
Lin Heng M.S. 2003 The Effects of High Intensity Ultrasonic Waves on Polypropylene, Polyamide 6 and Their Blends
Lin Kehua M.S. 2016 Ellipsomery Measurements of Chemical Reactions and Diffusion Processes in Polymer Films
Lin Tsui-Hsun Ph.D. 2009 Birefringence, Anisotropic Shrinkage and Luminance in Injection Molded Light-Guide Plate: Modeling and Experiment
Lin Tzu-Jen Ph.D. 2013 Force Field Parameters, Molecular Models, and Adsorptions of Biomolecules on Hydroxyapatite at Aqueous Interfaces
Lin Wan-Hua M.S. 2017 Cellulose Aerogel Monoliths and Microparticles and their Applications in Drug Delivery System
Ling Zichen M.S. 2019 Ion Effects on Self-Healing Poly(acrylic acid) and Poly(methacrylic) Acid Gels
Lipowski Brian M.S. 2014 Phase Behavior of 12-Hydroxystearic Acid Gels
Liu Chang M.S. 2015 Polyaniline/Graphene Based Symmetric and Asymmetric Solid-State Supercapacitors
Liu Chang M.S. 2014 Effect of Polymer Molecular Weight, Binary Processing Additives, Two-Dimensional Polymer on Efficiency of Polymer Solar Cells
Liu Chang Ph.D. 2017 High Performance Solution-processed Perovskite Hybrid Photovoltaics: Solar Cells and Photodetectors
Liu Chengjun M.S. 2000 Chemical and Viscoelastic Effects on Electrical Conduction by Emeraldine Salt in Powder and Composite Adhesive Forms
Liu Dan M.S. 2000 Mixing Silica and Other Fillers into Elastomers in NEX-T Continuous Mixer
Liu Hua Ph.D. 2013 Transport Mechanisms and Surface Properties Study on Polymer-based Solar Cells
Liu Jieruo M.S. 2013 Manufacturing of Polypropylene (PP)/ Ground Tire Rubber (GTR) Thermoplastic Elastomers Using Ultrasonically Aided Extrusion
Liu Jung-Liang Ph.D. 1992 Does Gel in Nitrile Rubber Affect the Properties of its Blend with Polyvinylchloride? A Fundamental investigation on the Tensile Property, Tear Resistance and Fracture Toughness
Liu Ruofan M.S. 2013 Assessment of Composite Railroad Tie Cracking
Liu Ruofan Ph.D. 2018 A Novel Methodology for Durability Assessment of Rubber Materials
Liu Xiangyu M.S. 2016 Highly Ordered Phase-separated PS/PMMA Blend Thin Films Structures via Capillary Force Lithography
Liu Xiaoxiao M.S. 2015 UV Laser Treatment of Tire Reinforcing Fibers for Improved Adhesion to Rubber
Liu Xilan Ph.D. 2013 Polymer Photodetectors: Device Structure, Interlayer and Physics
Liu Yanghe M.S. 2021 All Solid-State Supercapacitors with Novel Perovskite Electrolytes
Liu Yawen M.S. 2018 Facile Fabrication of Functional Slippery Polydimethylsiloxane (PDMS) Elastomer
Liu Yuqing Ph.D. 2011 Synthesis and Characterization of Well-Defined, Amphiphilic, Ionic Copolymers
Lo Yi Ting M.S. 2019 Synthesis and Characterization of Deep Eutectic Solvents (DES) with Multifunctional Building Blocks
Longanecker Melanie Ph.D. 2017 Controlling the Microstructure and Kinetics of Block Copolymer Self-Assembly by Direct Immersion Annealing
Lopez-Gonzalez Francisco M.S. 1998 Rheology, Curing Kinetics and Dielectric Analysis of Polymer Concretes
Lu Hui M.S. 2001 The Influence of Excimer Laser Irradiation on the Morphology, Ablation Rate, Thermal Properties, and Ultrasonic Welding Strength of Thermoplastic Polymers
Lu Weijun M.S. 2000 Extrusion Characterization and Melting Mechanism of Thermoplastic Elastomer and Thermoplastics
Lu Xiaoxu M.S. 2016 A Facile Method to Fabricate Versatile Janus Nanoparticles
Lu Xing M.S. 2013 Controlled Release of Cyclosporine A from Hydrophobically-Modified Hydrogels
Luo Tengli M.S. 1997 Rubber/Plastic Blends Based on Ultrasonically Devulcanized Ground Rubber Tire
Luo Xiongyu M.S. 2022 Polymer/Metal Oxide Hybrid Nanostructures from Bottom-up Synthesis and Top-down Nanofabrication
LuoYanM.S.2014Nanoporous Block Copolymer Membranes for Separation and Filtration
Lyu Min-Young Ph.D. 1997 Theoretical and Experimental Studies of a Buss Kneader
Ma Jianxing M.S. 2016 Towards 3D Printing of Thermoplastic Shape Memory Polymers
Ma Yubing M.S. 2016 Contraction of Weak Polyelectrolyte Multilayers in Response to Organic Solvents
Ma Zhihao M.S. 2019 Novel Materials as Electrode and Electrolyte for All-Solid-State Supercapacitors
McClanahan Eric Ph.D. 2017 Modification and Enhancement of Epoxide Coatings via Elastomeric Polysulfides, Self-Assembled Nanophase Particles, Functional Sol-Gels, and Anti-Corrosion Additives
Mackura Mark M.S. 2013 Nano-confinement Effects on the Glass Transition of a Coarse-grained Polymer Melt
Madan Sanjeev Ph.D. 1989 Plastic Deformation and Recovery of Semi-Crystalline Polymers
Maffei Mario M.S. 2006 Characterization of Foaming Phenomena of Polypropylene Filled with Azodicarbonamide and Silica
Mahanth Satishkumar M.S. 1993 Processing-Structure-Property Relationships in Melt Spun Poly (vinylidene flouride)/ Poly(methyl methacrylate) Blends
Mangalara Jayachandra Hari Ph.D. 2017 Control of Polymer Glass Formation Behaviour using Molecular Diluents and Dynamics Interfaces
Mao Jingyi M.S. 2019 Study of Solute Uptake in Polyelectrolyte Coacervate: Influence of Phase Behavior and Chemical Crosslinking to Produce Stable Encapsulating Drops
Marin Angel Juan Ph.D. 2021 Development of Ion-Containing Polymers and Study of Their Molecular, Mechanical, and Flexoelectric Properties
Marquina Edgar M.S. 2010 Use of Dynamic Mechanical Testing, EACS and SEM Image Analysis to Study the Properties of Polypropylene/Calcium Carbonate Nanocomposites
Martins Carla Ph.D. 2004 Mechano Optical Behavior of PET and PEN Under Linear and Programmed Deformation Rate Profiles
Matkar Rushikesh Ph.D. 2007 Phase Diagrams and Kinetics of Solid-Liquid Phase Transitions in Crystalline Polymer Blends
Mawhinney Kaitlyn Ph.D. 2020 Design and Characterization of Emulsion-templated Macroporous-Mesoporous Polyurea Gels and Aerogels
Meenakshisundaram Venkatesh Ph.D. 2018 Elucidating Physics of Sequence-Specific Polymers and the Glass Transition via Evolutionary Computational Design
Mehr Hamideh Ph.D. 2019 Application of High-Performance Polyimides in Additive Manufacturing and Powder Coating
Mehta Atul M.S. 1990 Self-Reinforced Fiber Composites of PEEK and Thermotropic Liquid Crystalline Polymer
Mehta Rujul Ph.D. 2003 Spatio-Temporal Growth of Polymer Single Crystals, Hedites and Spherulites During Isothermal Crystallization
Meksupha Pawiga M.S. 1996 Miscibility Study of Halogen Flame Retardant Polymer Blends
Melnikov Alexei Ph.D. 2010 Damage and Fatigue in Cross-linked Rubbers
Meng Lei Ph.D. 2015 Organic/Inorganic Hybrid Coatings for Anticorrosion
Meng Scott Ph.D. 2004 Phase Equilibria and Morphology Development in Liquid Crystal/Photo-Curable Monomer Mixtures Undergoing Pattern Photo-Polymerization
Meng Tianyu M.S. 2015 E-beam Evaporated TiOx as the Electron Transfer Layer for Perovskite Hybrid Solar Cells
Merling Weston Ph.D. 2018 Investigating the Effects of Interfacial Features on Nanoscale Confined Polymer Systems
Miller Kent Ph.D. 2012 Production of Poly(lactic acid) Biodegradable Films and the Introduction of a Novel Initiation Method for Free Radical Polymerization via Magnetic Fields
Miller Ronald M.S. 1991 Polyethyl Acrylate Viscoelastic Characterization, Interaction with Carbon Black, and Heat Aging of Vulcanizates
Mishra Ratan Ph.D. 2012 Simulation of Interfaces in Construction Materials: Tricalcium Silicate, Gypsum, and Organic Modifiers
Mitra Aravind Arpita M.S. 2000 Rheological, Kinetic and Chemorheological Studies of Gum SBR Compound
Modi Arvind Ph.D. 2016 Direct Immersion Annealing of Block Copolymer Thin Films
Modic Michael M.S. 1986 Self-Reinforced Melt Processible Polymer Composites
Montes Sergio Ph.D. 1991 Rheology and Processing of Carbon Black Compounds
Moon Chae-Woo Ph.D. 1999 Kinetic and Rheological Studies of Silica Filled SBR Compounds
Mu Shenglong M.S. 2016 A Real-time Study on Mechano-optical Properties of Chitosan during Film Formation and Processing
Mukherjee Partha M.S. 1989 Phase Transformations in Hydroxypropyl Cellulose
Mulligan Jake Ph.D. 2004 Non-Linear Stress Optical Behavior of Poly L-Lactic Acid and its Nanocomposites During Stretching/Relaxation/Retraction from Amorphous Precursors
Nagaraj Phaniraj M.S. 2003 A Study of the Factors Affecting Performance of Layered Silicate Nanocomposites Using Styrene-Co-Acrylonitrile model Polymer System
Nah Chang-Woon Ph.D. 1995 Wear Mechanisms of Rubber Compounds
Nalawade Priyanka Ph.D. 2015 Alkyd-based High-solid and Hybrid Organic Coatings
Nallapaneni Asritha Ph.D. 2020 Biomimetic Non-Iridescent Structural Colors via Phase-Separation of Compatibilized Polymer Blend Films
Nam Joonhyun Ph.D. 1993 Phase Transitions in a Thermotropic Copolyester and Phase Behavior of its Blends
Nanjudiah Kumar M.S. 2003 Development of Phototonic Crystals Induced by Pattern Photo-Polymerization via Holographic Interface Technique
Narayan Kiran M.S. 1998 A Unified Approach to Mechanical Adhesion by Finite Element Analysis of Straight Sections
Narute Suresh Ph.D. 2022 Highly Ion Conductive Polymer Electrolyte Networks for Energy Storage Applications
Nebioglu Ahmet Ph.D. 2006 Network Formation and Thermo-Mechanical Properties of Photo-Curing Inorganic/Organic Hybrid Coatings
Negandhi Nishant M.S. 2003 The Use of Eximer Laser in Evaluation of Processing Effects in Injection Molded PET and PBT
Niemeyer Matthew M.S. 1989 Processing-Structure-Property Relationships in Cool Rolled PEEK Poly(ether ether Ketone) and PPS Poly(p-phenylene Sulfide)
Niknezhad Sepideh Ph.D. 2017 Strategic Design of Nanofiber Carriers for Drug Release
Niknezhad Setareh Ph.D. 2013 Ultrasonically Assisted Single Screw Extrusion, Film Blowing and Online Film Casting of LLDPE/Clay and PA6/Clay Nanocomposites
Nirantar Prasad M.S. 2001 Optimization of Adhesively Bonded Single Lap Joints by Tapering of Adherends
Norton Edward M.S. 2019 Steady State and Dynamic Oscillatory Shear Properties of Carbon Black Filled Elastomers
NugayIsik IsilPh.D.2014Polyurethanes in Rigid and Flexible Electronics Novel Hybrid Processing Techniques and Real-Time Monitoring of Material Properties
Nwabunma Domasius M.S. 1996 Development of Birefringence-Free Optical Adhesives Via Optical Anisotropy Compensation : Blends of Reactive Copolymer and Homopolymer
Nwabunma Domasius Ph.D. 1999 Photopolymerization-Induced Phase Separation and Morphology Development in Liquid Crystal/Polymer Blends
Offenbach Ido Ph.D. 2016 Mechano Optical Behavior of Novel Polymers for Capacitor Application during their Processing Cycles
Oh Jeong-Seok Ph.D. 2003 Applications of Powerful Ultrasound to Thermoplastic Elastomers and Rubbers
Okuno Shigeki Ph.D. 1996 Solvent-Dependent Plateau Modulus and Time-Dependent Dynamic Moduli of Plasticized Polymer Containing Multiple-Branched Molecules
Opalko Robert M.S. 2008 Mechanisms of Nanoparticle Induced Morphology Development in Immiscible Blends of Polypropylene/Polystyrene
Osanaiye Gabriel Ph.D. 1994 On the Rheological Properties of Suspensions, Filled Thermoplastics and Rubber Compounds
Oshiro Tadashi M.S. 1999 Application of the Ginzburg-Landau Theory to Polymer Crystallinization
Ou Xuesong Ph.D. 2004 Structural Mechanisms as Revealed by Real Time Mechano Optical Behavior of Polylactic Acid Films in Uni and Biaxial Deformation and Heat Setting Processes
Ou-Udomying Boonharn M.S. 1993 Development of High-Impact Polyamide Molding Resin, Blend of Nylon-66 with Poly(ethyl acrylate) Rubber
Ozisik Rahmi M.S. 1996 Phase Behavior and Structure Development in Melt Spun PEEK/PEI Blends
Ozturk Ozgu M.S. 2004 Optimization of Thermoplastic Impregnation of Glass Rovings with Pultrusion
Pan Shuyang M.S. 2016 Z-Alignment of Halloysite Nanotubes in Norland 65
Panchal Jatin M.S. 1999 Influence of Composition on Deformation Behavior in Blends of PEEK and PEI
Pande Mumu M.S. 1999 Wear Rate Investigation and Wear Particle Characterization of Silica-Silane and Carbon Black Reinforced Rubber
Pantoja Marcos Ph.D. 2019 Compounding and Processing Approaches for the Fabrication of Shape Memory Polymers
Paramonov Pavlo Ph.D. 2005 Theoretical Modeling of the Nanostructure Formation in Soft Condensed Matter Using Atomic Force Microscopy
Park Dongkyu M.S. 1992 Single Phase Blends of Bisphenol a Polycarbonate and Poly(Phenyl Methacrylate)
Park Dongsik Ph.D. 2008 Self-Assembled Patterns of Block Copolymer/Homopolymer Blends
Park Ho-Sung Ph.D. 1990 Fundamental Studies on Processing, Characterization & Properties of Poly-p-phenylene Terephthalamide/Polyamides Molecular & Particulate
Park Jong-Hyun Ph.D. 2004 A Study on Nanocomposites of Epoxy-Clay and Epoxy-Clay-Thermoplastic Polymer Systems
Park Soo Jeoung Ph.D. 2008 Photopolymerization-Induced Crystallization in Relation to Solid-Liquid Phase Diagrams of Blends of Poly(Ethylene Oxide)/ Multi-Functional Acrylate Monomers
Parnell Shane Ph.D. 2002 The Reactive Blending of a Thermoplastic Polyurethane In Situ with Poly(Vinyl Chloride)
Patel Kalpesh M.S. 1994 Thermal and Reaction Induced Phase Separation in Thermoset/Thermoplastic Blends
Patel Keskar Nisha M.S. 2000 Reactive Compatibilization of PBT/PPO Blends Using Low Molecular Weight Epoxies
Patil Ajeeta M.S. 2004 Synthesis and Microfabrication of Aligned Carbon Nanotubes
Patil Renuka Ph.D. 2021 Fabrication of pH Responsive Membranes Using 248 nm KrF Excimer Laser
Pattanayak Asim Ph.D. 2005 Clay-Tethered Thermoplastic Polyurethane Nanocomposites by Bulk Polymerization Methods
Pedraza Erika M.S. 2006 A Study of the Effects of Functionality on Certain Aspects of Cross-Linkable Latex Systems
Pellegrene Brittany Ph.D. 2019 Modification of Alkyd Resins and Seed Oil Based Reactive Diluents for High Performance Coatings
PengFangM.S.2014Controlling Radial Compositional Gradient in Electrospun Polyacrylonitrile/Silver Composite Fibers using Chemical Solvent Vapor Treatment and Sintering Technique
Peng Fang Ph.D. 2018 Core-Shell Structured Filaments for Fused Filament Fabrication 3D-Printing
Perego Alessandro Ph.D. 2022 Microstructure and Rheology of Vitrimers Using Hybrid Molecular Dynamics and Monte Carlo Simulations
Perilla Jairo Ph.D. 2004 A Study of the Relationship Between the Morphology and Rheology of Immiscible Polymer Blends with Temporal Changes in the Interfacial Area
Pitia Emmanuel Ph.D. 2012 Composite Proton Exchange Membrane Based on Sulfonated Organic Nanoparticles
Pole Sandeep Ph.D. 2019 Constitutive Modeling of the Rheological Behavior of Rubber Compounds and Plastic Composites
Popa Stilke Morgan M.S. 2016 Diffusive and Deformation Behavior of Physically Crosslinked Hydrogels
Pratiwada Chaitanya M.S. 2012 High Fidelity Detection of Defects in Polymer Films Using Surface-Modified Nanoparticles
Prieto Alberto M.S. 2001 Wood Flour Composites of High Temperature Polymers by Reaction Induced Phase Separation
Puatrakul Tithinun Ph.D. 2000 Studies of Ionic Conductivity of Uniaxially Stretched Polymer Electrolytes Films
Puttarudraiah Amrutheswar M.S. 2003 Upgrading Recycled Waste Stream Polyethylene by Modification with Nanoscale Clay Hybrids
QianJiajieM.S.2014Control of C60-POSS Nanoparticle Location in Directed Self-Assembly of Block Copolymer Thin Films
Qian Jin M.S. 2018 Swelling and Plasticization of Polymeric Binders by Li-Containing Carbonate Electrolytes Using Quartz Crystal Microbalance with Dissipation
Qiang Zhe M.S. 2013 Morphology Control in Mesoporous Carbon Films Using Solvent Engineering
Qiang Zhe Ph.D. 2016 Simple, Generalized Method to Highly Aligned Block Copolymer Films: Solvent Vapor Annealing with Shear
Qiu Jialin M.S. 2015 Synthesis of High Molecular Weight Poly (methyl methacrylate by Activators Regenerated by Electron Transfer Atom Transfer Radical Polymerization
Qu Cheng Ph.D. 2013 Novel Polymer Electrolyte Membranes for Ni-Zn Battery
Quade Derek Ph.D. 2017 Investigation of Interfacial Bonding Between Shape Memory Alloys and Polymer Matrix Composites
Rahman Tamanna Ph.D. 2020 Interfacial Effects on Rheological Response of Nanoconfined Polymers
Rajaraman Hariharan M.S. 1992 Effect of Fillers on the Spin Welding Behavior of Poly-p-phenylene Sulfide Resins
Rajgarhia Stuti Ph.D. 2016 Control of Morphology and Diameter of Bicomponent Polymeric Nanofibers with Applications in Filtration
Rajput Pankaj M.S. 2003 Long Term Migration Effects on the Pull-Out Strength of Silver Wire Embedded in an Adhesive Matrix
Ramanujam Anand M.S. 1998 Phase Behavior and Vulcanization Induced Phase Separation in Blends of Syndiotactic PP and Ethylene Propylene Diene Terpolymer
Ramezani-Dakhel Hadi Ph.D. 2015 Bioengineered Metal Nanoparticles: Shape Control, Structure, and Catalytic Functionality
Ramirez-Huerta Mayela M.S. 2004 Influence of Blend Composition on Structure Development During Uniaxial Stretching of Poly(vinyl chloride)/Poly(e-Caprolactone)
Ramirez-Huerta Mayela Ph.D. 2009 Steric and Anchimeric Effects on the Hydrolysis of Oligoesters and their Influence on End-Use Polyurethane Coatings
Randall Jason Ph.D. 2010 Tailoring Structure Property Relationships and Elastic Phenomenon in Native and Polymer Reinforced Silica Aerogels
Rathi Pankaj Ph.D. 2009 Theoretical Modeling of Morphology Development in Blends of Semicrystalline Polymers Undergoing Photopolymerization
Raut Prasad Ph.D. 2017 Towards Development of Polymeric Compounds for Energy Storage Devices and for Low Energy Loss Tires
Razzaghi-Kashani Mehdi M.S. 1997 Analytical Simulation of Mechanical Processes of Wear for Rubber Vulcanizates
Razzaghi-Kashani Mehdi Ph.D. 2000 A Numerical Approach Towards Understanding the Mechanism of Fatigue Wear in Tread Vulcanizates During Rolling of Tires
Reagan Michael M.S. 2009 Electric Charging and Nanostructure Formation in Polymeric Films Using Combined Amplitude-Modulated Atomic Force Microscopy Assisted Electrostatic Nanolithography and Electric Force Microscopy
Ren Tianli M.S. 2017 Fabrication and Evaluation of Electrochemical Performance of Solid Polymer Electrolyte Membrane for Lithium-Ion Battery
Ren Xianjie M.S. 2016 Use of Fly Ash as Eco-friendly Filler in Synthetic Rubber for Tire Applications
Rendon Piedrahita Camilo Ph.D. 2018 Study of Highly Conductive, Flexible Polymer Electrolyte Membranes and their Novel Flexoelectric Effect
Rhee Sangkeun Ph.D. 2000 Structure Development of Polyamides (=Nylons) in Film Extrusion and Stretching Processes
Rottmayer Christopher M.S. 2004 Optimization of Epoxy Bonding to Granite Based on Fracture Considerations
Roy Sayantan Ph.D. 2011 Polyhedral Oligomeric Silsesquioxane-Sorbitol Non-Covalent Interactions: Effects on the Reinforcement of Isotactic Polypropylene Spun Fibers
Ruan Dihui M.S. 2015 Glass Formation Behavior of Model Ionomers
Sadeghi Mohammad M.S. 1987 Effect on Plasticizer type on Gelation and Fusion Behavior of Polyvinyl Chloride Plastisol
Saifee Valsadwala Abbas M.S. 2023 Understanding the Crystallinity of Carbon Black and its Effects on Filled Rubber Compounds
Salata Ryan Ph.D. 2017 Modified Alkyds for High Solids Coatings and Adhesives
Saldanha Singh Jeanne M.S. 1987 Phase Separation Phenomena in Polymer Blends: Mechanisms and Controlled Morphology
Salunke Namrata Ph.D. 2018 Self-Assembly of Functional Amphiphilic Triblock Copolymer Thin Films
Samant Saumil Ph.D. 2016 Directed Self-assembly of Block Copolymers for High Energy Density Polymer Film Capacitors
Sanghvi Mukesh M.S. 1991 Rheology and Instabilities of Extrusion Coating Process
Satam Sayali Ph.D. 2018 Optimization of Wet Friction Systems Based on Rheological, Adsorption, Lubricant and Friction Material Characteristics
Sau Madhusudan Ph.D. 2003 Morphology Development in Chaotic Mixing of Polymers
Scavuzzo Robert M.S. 1993 Computer Simulation of the Filling and Post Filling Stages of the Injection Molding Cycle of a Rubber Compound
Schaal Stephane Ph.D. 2000 The Study and the Prediction of the Rheology and Processing of Tire Compounds
Schaible Stephen M.S. 1992 Investigations into Instrumented Spin Welding and Vibration Weldin of Poly(vinylidene) Fluoride
Schaner Jason M.S. 2018 The Impact of Nanoclay Addition on PVC Pressure-Sensitive Digital Printed Films
Schauber David M.S. 2002 The Behavior of Filament-Wound Carbon Fiber/Epoxy Composite Tubes Under Axial Compression
Schmidt Ryan M.S. 2011 Magnetic Nanoparticle Field Directed Self-Assembly: Magnetic Flux Line Mapping and Block Copolymer Driven Assembly
Scobbo James M.S. 1986 Behavior of Gum Elastomers and Carbon Black-Filled Compounds in Shear and Elongational Deformation: Effect of Gel, Filler and Elastomer Type
Scobbo James Ph.D. 1989 Rheology, Processing and Mechanical Properties of Thermoplastic/Graphite Fiber Composites
Seif Sylvain Ph.D. 2009 Temporally Programmed Stretching of Polymer Films: Influence of Nanoparticles
Sen Taner Ph.D. 2003 Investigation of Dynamics and Structure Development During Uniaxial Stretching of PET Films at Different Molecular Weights Using Fully Automated Spectral Birefringence Technique
Sepulveda-Medina Pablo Ph.D. 2021 Ice Inhibition Properties of Supramolecular Hydrogels
Seo Junyoung Ph.D. 2019 D-Glucaric Acid Based Polymers and Crosslinkers: Polyesters Bearing Pendent Hydroxyl Groups and Dissolvable Chemically Crosslinked Gels
Serhatkulu Toprak Ph.D. 2000 Crystallization and Birefringence Studies on Fast Structural Changes Followed by Non-Contact Spectral Birefringence and Raman Spectroscopy Techniques
Severe Geralda Ph.D. 1999 Characterization and Development of New Hydrogenated Acrylonitrile-Butadiene Rubber Blends
Seylar Joshua Ph.D. 2022 Scalable Synthesis of Helicenes: Enabling the Application of Helicenes to Next-Generation Materials
Shah Jayesh M.S. 1991 Continuous Filament Reinforced Thermoplastics for Automative Body Panels
Shah Ketan Ph.D. 1987 Characterization of Phase Behavior and Deformation Mechanisms of Polybutadienes, Styrene-Butadiene Copolymers and their Blends
Shah Nilay M.S. 2023 Investigation on 3D-Printing of Homopolymer Polypropylene
Shah Nipesh M.S. 1999 Study of Interfacial Adhesion and Injection Molding of Liquid Crystalline Polymer Blends
Shah Nirav M.S. 2001 Design and Filament Winding of Composite Shield for Jet Engine Fan Blade Containment
Shah Sachin M.S. 1992 Influence of Injection Molding Variables on the Mechanical Properties of Filled PBTP Using a Statistical Design of Experiment
Shams Es-Haghi Siamak Ph.D. 2015 Mechanics of Tough Chemically Cross-Linked Hydrogels
Shan Haifeng Ph.D. 2006 Structure Development in Melt Spinning, Cold Drawing and Cold Compression of Poly(ethylene-co-octene) with Different Octene Content)
Shang Jihui M.S. 2013 Effect of Carbon Nanotube on Fabrication of Single-component and Bi-component Nanofibers by Gas Jet Method
Shen Chungsea Ph.D. 1995 Phase Equilibrium and Phase Separation Dynamics in Polymer Dispersed Liquid Crystals
Shen Lening M.S. 2021 High-Performance Perovskite Solar Cells by Active Layer Composition Engineering
Shen Liyang M.S. 2015 Real-Time Mechanical and Mechano-Electrical Behavior of Carbon Black Filled Films
Shen Naifu M.S. 2021 Macromolecular Engineering and Additive Manufacturing of Poly(styrene-b-isobutylene-b-styrene) (SIBS)
Shi Ying Ph.D. 2013 High Temperature Shape Memory Polymers and Ionomer Modified Asphalts
Shieh Woei-Jian M.S. 1990 Processability of Silica Filled Compounds
Shim Sang Eun Ph.D. 2002 Ultrasound Devulcanization of Silica Filled Silicone Rubber: Processing, Property and Molecular Aspects
Shimojo Kenichi M.S. 1993 Characterization of Strain-Induced Crystallization in Relation to Injection Molding of Thermoplastics
Shin James M.S. 2013 Shape Memory Elastomers and Fatty Acid Organogels: Functional Materials from Small Molecule Additives
Shin Jin-Woong Ph.D. 2003 The Effect of Processing Parameters on Pressure Development, Gas Penetration Length and Residual Wall Thickness in Gas Assisted Injection Molding
Shin Kyung Chul M.S. 1989 Influence of Carbon Black on Extrudate Swell and Shrinkage in Rubber Compounds
Shin Kyung Chul Ph.D. 1994 A Basic Study of a Pin Barrel Screw Extruder
Shinko Andrew Ph.D. 2015 Structure and Morphology Control in Polymer Aerogels with Low Crosslink Density
Shockey Frederick M.S. 1996 Relaxation Modulus Approximation with Fractional Calculus
Shon Keungjin Ph.D. 2003 Mixing Studies in Modular Intermeshing Co-Rotating Twin Screw Extruder, Modular Counter-Rotating Twin Screw Extruder, Buss Kneader and Kobelco Nex-T Continuous Mixer
Shyu Goang-Ding Ph.D. 1993 Birefringence and Residual Stresses in Molded Articles of Amorphous Polymers
Silin Maxim Ph.D. 2002 Some Problems of Polymer Flows in Channels and Dies
Simhambhatla Murthy M.S. 1990 Fundamental Studies on Biaxial Stretching, Plasma Treatment, and Vacuum Metallization of Poly(ether ether ketone) (peek) Films
Simhambhatla Murthy Ph.D. 1994 The Rheological Modeling of Simple Flows of Unfilled and Filled Polymers
Simmons Sean M.S. 1999 Optimization of Adhesively Bonded Single Lap Joints by Adherend Notching
Singh Gurpreet Ph.D. 2013 Dynamic Thermal Field-Induced Directed Self-Assembly of Block Copolymer Thin Films
Smith Scott Ph.D. 2018 Resolving the Molecular Origins of Reinforcement in Filled Elastomers using Molecular Simulation
Sobani Masoud Ph.D. 2018 Smart Flexible Anticorrosion Coating
Sobhanie Mohammed M.S. 1996 Rheological Models for Particle Filled Polymers
Sohn Min-Seok M.S. 1989 Characterization of Rotational Molding Resin Powders and Study of Structure-Property of Rotationally Molded Sample
Song Chang Hoon M.S. 1994 Phase Separation and Electro-Optical Properties of Polymer Dispersed Liquid Crystal Films
Song Chang Hoon Ph.D. 1999 Self-Reinforced Composites of Polyesters and PET/HBA Based LCP
Song Han Jong M.S. 1987 Die Extrusion of Rubber Compounds : Flow Patterns and Extrudate Character
Song Kwangjin Ph.D. 1998 Structure Development of Polyester and their Blends in Film Formation Processes
Song Lin Ph.D. 2010 Chemical Modification of Starch and Preparation of Starch-based Nanocomposites
Song Sang-Sub Ph.D. 1990 Fundamental Study of Structure Development and Processing in Polycondensate Compounds
Soundarrajan Prabhu M.S. 2003 Electrochemical Devices Based on Conducting Polymers and Aligned Carbon Nanotubes
Sridhar Siddhamalli M.S. 1998 Toughening of Epoxy/Thermoplastic Composites via Reaction Induced Phase Separation
Sridharan Harini M.S. 2020 Coupled Dynamics of Heat Transfer and Fluid Flow in Shear Rheometry
Srinivasan Ashok M.S. 1992 Nonlinear Modeling of Melt Flow Instability
Stadler Michael M.S. 2004 Viscoelastic Properties of Unreinforced and Reinforced Plastic Lumber
Su Wen-Yi M.S. 1993 In-situ Copolymerization and Compatibilization of Polyester and Polystyrene Blends
Subramaniam Pazampalacode M.S. 1993 Blends and Composites of a Liquid Crystal Polymre with an Engineering Thermoplastic
Sudhindrakumar Guruprasad M.S. 2003 A Novel Economical Method to Improve the Toughness of CArbon/Epoxy Long Fiber Components by the Integration of Glass Tow Loops Core
Suh Chang Ho Ph.D. 1995 Rheology and Processing of Talc Filled Thermoplastics
Suh Jaein Ph.D. 2007 Comparative Structure Development of Various Polyolefins in Injection Molding Process
Suh Kenneth M.S. 1991 Fundamental Studies of Flow of Elastomers and Thermoplastics and Their Blends in an Internal Mixer, and Their Properties
Sujan Brijesh M.S. 2005 Revulcanization of Ultrasonically Devulcanized Tire Rubber: Cure Kinetics and Physical Properties
Sun Mingze M.S. 2021 Digital Light Processing 3D Printing of Reconfigurable Reprintable Ion-Crosslinked Shape Memory Polymer
Sun Weicheng M.S. 2018 Use of Torrefied Sorghum as Eco-Friendly Filler in Styrene Butadiene Rubber
Sun Ximei Ph.D. 2007 The Devulcanization of Unfilled and Carbon Black Filled Isoprene Rubber Vulcanizates by High Power Ultrasound
Sun Yan Ph.D. 2016 Controlled Morphology in Bulk Heterojunction Polymer and Perovskite Solar Cells
Sundarapandian Senthil Kumar M.S. 1993 Viscoelastic Characterization of Poly(ethyl acrylate)
Sunthonpagasit Nongnard M.S. 2000 Improving Ultrasonic Weld Strength of Polypropylene by Joint Design, Polar Additives, and by the Methods of Excimer Laser, and Solvent Treatment
Suppiah Giritharan M.S. 2002 Effects of Plasticizers with Various Molecular Weight and Structure on Properties of Polyvinyl Chloride and its Blend with Polyurethane
Suri Atul M.S. 1999 Electrical Conductivity and Characterization of Polypropylene and Chemically Modified Polypropylenes Filled with Copper Powder
Swaminathan Suresh M.S. 1988 Thermoplastic Fiber-Reinforced Composites Based on Liquid Crystalilne Polymers
Tandel Vijay M.S. 1994 Miscibility and Conductivity of Polyethylene Oxide and Polypropylene Oxide Blends Complexed With a Copper Salt
Tang Kangli M.S. 2015 Study of Genistein/Epoxidized Natural Rubber (ENR) Blends and its Application for Poly(vinyl chloride) (PVC) Plasticization
Tangvigitsakul Pattarasai Ph.D. 2015 Methoxy Poly(ethylene glycol) Methacrylate-based Copolymers on the Applications of Concrete Admixtures, Mesoporous Materials, and Rheology Modifiers
Tapale Mayuresh M.S. 1998 Continuous Ultrasonic Devulcanization of Unfilled Natural Rubber Vulcanizates
Teli Samar M.S. 2002 Stress States and Interference in Double Adhesive Layer Scarf and Butt Joints
Teo Nicholas Ph.D. 2019 Nano, Micro and Macro Scale Control of Porous Aerogel Morphology
Thakkar Hemant M.S. 2003 The Morphology, Rheology and Processing of Thermoplastic Vulcanizates and Their Nanocomposites
Thomas Jomin Ph.D. 2023 Towards Polymer Sustainability via the Development of Sustainable Thermosets and Composites from Norbornylized Seed Oils, and Assessment of Environmental Impact of Tires
Thongtan Roungrong M.S. 2006 Morphological Study of Compatibilization of Immiscible Polymer Blends Using a Functionalized Block Copolymer
Tiwari Ankit Ph.D. 2018 Fabrication of Temperature Responsive Membranes using 248 Nanometer Krypton Flouride Excimer Laser
Trivedi Meeta Ph.D. 2022 Towards the Development of Polymeric Materials for Lithium-Ion and Post-Lithium-Ion Technology
Tsai Cheng-Han M.S. 2023 Flexible Optical Materials by Molecular Engineering and Integration of Perovskite Quantum Dots and Thermoplastic Elastomers
Tsai Hsien-Yin M.S. 1992 The Deformation and Instability of Phase Morphology of Fluoroelastomer and Polycarbonate Blends
Tsai Hsien-Yin Ph.D. 1995 Functionalization of Polystyrene and Low Density Polyethylene and Their Reactive Blending With Polyethylene Terephthalate
Tse Joseph M.S. 1989 Processing-Structure-Property Relationships in Biaxially stretched Poly (Butylene Terephthalate)/Poly(Ethylene Isophthalae) Blends
Ulcer Yakup Ph.D. 1995 Injection Molding of Slowly Crystallizing Polymers
Unsal Emre Ph.D. 2013 Integrated Real Time Studies to Track All Physical and Chemical Changes in Polyimide Film Processing: From Casting to Imidization
Vadhar Parimal M.S. 1985 Co-Crystallization and Miscibility Studies of Ultra-High Molecular Weight Polyethylene Blends
Vaidya Nitin Ph.D. 1999 Rheology, Phase Behavior and Morphology of Blends Containing Diblock Copolymer
Valladares David M.S. 2002 Real Time Strain Induced Crystallization and Structural Hierarchy Time Evolution in Crosslinked Natural Rubber
Van Sweden Chadwick M.S. 2000 Effect of Processing Conditions on Microstructure and Mechanical Properties of Injection Molding of Polypropylenes of Various Molecular Weights
Varkey Joseph Ph.D. 1999 Industrial and Scientific Significance of Polymer-Solvent Interaction Through Viscoelastic Properties
Varma Rajesh M.S. 1997 Miscibility Studies of Blends of Block Copolymers and Asphalt
Varma Tilak M.S. 1991 Blends of Thermoplastics Polyamides and a Lliquid Crystal Polymer
Venkateswaran Hari M.S. 1992 A Fast Dual Wavelength Optical Technique to Study Crystallization in Pre-Oriented PET Films
Viswanathan Ravishankar M.S. 1994 Mixing, Injection Molding and Lamination of Liquid Crystal Polymer Blends
Vongpanish Pratum Ph.D. 2000 Engineering Polymer Blends Based Upon Phenolic-Modified Polyolefins
Vorontsov Sergey Ph.D. 2015 Rheology of Ionomers
Wadley Maurice Ph.D. 2011 Synthesis and Morphology Characterization of Polydimethylsiloxane-Containing Block Copolymers
Walker Eric M.S. 2000 Effect of Fillers on Ultrasonic Welding of Polypropylene
Wan Min Ph.D. 1995 Injection Molding of Rubber Compound with Rheology Affected by Vulcanization
Wang Chao Ph.D. 2018 Effect of Reversible Crosslinks on Nanostructure and Properties of Supramolecular Hydrogels
Wang Chi Ph.D. 1992 Fracture Mechanics of Model Fiber composites
Wang Dongbiao Ph.D. 2005 In-Line Monitoring and Analysis of Polymer Melting Behavior in an Intermeshing Counter-Rotating Twin-Screw Extruder by Ultrasound Waves
Wang Enmin M.S. 2013 A Real Time Study on the Mechanoptical Properties of Polyvinyl Alcohol: Effect of Water
Wang Enmin Ph.D. 2017 Photo-Curable Electrical Contact Stabilization Materials
WangKaiM.S.2014Magnetic Nanoparticles and Magnetic Effects Induced Novel Anode Buffer Layer for Polymer Solar Cells
Wang Kai Ph.D. 2017 High Performance Solution-processed Perovskite Hybrid Solar Cells through Device Engineering and Novel Materials
Wang Haoran M.S. 2016 Preparation Titanium Oxide/Epoxy Hybrid Anticorrosive Coating
Wang Lei M.S. 1998 Reactive Processing for Enhancement of Adhesion of Polypropylene with Acidic Monomers
Wang Min-Diaw M.S. 1989 Processing-Structure-Property Relationships in Biaxially Stretched and Tubular Blown Thermoplastic Elastomer Films
Wang Qianhe M.S. 2013 Investigation of Acrylated Alkyd
Wang Qianhe Ph.D. 2016 Acrylated Alkyds
Wang Qiaoyun M.S. 2020 Hydrophobically Modified Polyelectrolytes to Tune Properties of Coacervates
Wang Shiping M.S. 2019 Thickness and Crystallinity Dependent Swelling of Poly(ethylene oxide)/Poly(methyl methacrylate) Blend Films
Wang Siyang M.S. 2016 Role of Amphiphilic Block Copolymer Composition on Pore Characteristics of Micelle-templated Mesoporous Cobalt Oxide Films
Wang Xiao Ph.D. 2013 Tailoring of Pore Structures and Surface Properties of Syndiotactic Polystyrene Aerogels
Wang Xiaojiang Ph.D. 2012 Polyester Based Hybrid Organic Coatings
Wang Xiaoteng M.S. 2016 Directed Nano-patterning of Polymer Nanocomposite Thin Films
Wang Xiaoteng Ph.D. 2019 Nanoimprinting Directed Assembly of Polymer-Grafted Nanoparticles in Polymer Thin Films
Wang Xueyuan Ph.D. 2012 Control and Characterization of Textured, Hydrophobic Ionomer Surfaces
Wang Yeh Ph.D. 1988 Analysis and Computer-Aided Design of Extrusion Dies for Shaping of Rubber Compounds
WangYiM.S.2014Synthesis and Characterization of Amphiphilic Poly(ethylene oxide)-Block Poly(octadecyl acrylate) Block Copolymers
Wang Yundong Ph.D. 1996 Processing-Structure-Property Relationships in Injection Molded PVDF and Blends of PVDF and PMMA
Wang Zixin M.S. 2017 Towards High-Performance Perovskite Solar Cells by Cathode Interfacial Engineering with Ternary Metal Oxide and Device Engineering with Bulk Heterojunction
Wang Cordry Shanshan Ph.D. 2007 Development of Polymer Electrolytes of Polyurethane and Polyether Modified Polysiloxane Blends with Lithium Salts
Wei Chunding M.S. 2017 High-Performance Asymmetric Supercapacitors Mainly Based on Metal Chalcogenide Compounds Electrode Materials
Weinheimer Deaver Emily Ph.D. 2020 Processing of Novel 3D Printing Materials and Facilitation of 3D Printing for Enhanced Mechanical and Structural Stability
Weisen Albree M.S. 2021 Thermorheological Dynamics of Glycerol-Based Colloidal Silica Suspensions
Wen Shihao M.S. 2016 Design of Multi-drug Release Coaxial Electrospun Mat Targeting Infection and Inflammation
Wiener Clinton Ph.D. 2017 Physically Crosslinked Hydrogels: Impact of Interfaces and Stress on Structure and Properties
Wong Chang Min Ph.D. 1990 The Effects of Sound and Ultrasound Oscillations upon Polymer Extrusion
Woods Rochelle M.S. 1992 Instrumented Compaction of Polymer Powders and Processing Structure Property Relationships
Wu Chonggang Ph.D. 2006 Transesterification, Mechanical Properties and Rheology of Blends of Thermoplastic Polyester and Model Thermotropic Polyester
Wu Dezhen M.S. 2018 Magnetic Field Effects Induced by Incorporation of Magnetic Nanoparticles on Bulk Heterojunction Polymer Solar Cells
Wu Jiawei M.S. 2015 Physical Properties of Blends of Triblock Copolymer (SEBS) with Low Molar Mass Liquid Crystals
Wu Jinping Ph.D. 2013 Investigation of Radiation Crosslinking Styrenic Block Copolymers and Maleimide-Terminated Imide Oligomers
Wu Jong-Pyo Ph.D. 1991 A Unified View of Polymer Chain Orientation in Complex Orientation State
Wu Leyao M.S. 2019 Effect of PET Support Membrane Thickness on Water Permeation Behavior at Thermally Responsive PNIPAM-g-PET Membranes
Wu Xinchi M.S. 2019 Covalently Crosslinked Coacervates with Enhanced Stabilization and Salt Partitioning in Complex Coacervates
Wu Zhenghao M.S. 2018 Investigating the Effects of Grafting and Chain Stiffness on Nano-confined Polymers using Molecular Dynamics Simulation
Wutticharoenwong Kosin Ph.D. 2007 Bio-Based Reactive Diluents and Thiol-Ene Photopolymerization for Environmentally Benign Coatings
Xia Xuhui Ph.D. 2020 Tuning Porous Structure through Cooperative Assembly with Solvent Composition and Microwave Heating
Xie Kefu M.S. 1992 Development of an In-Situ Curemeter
Xie Shaoxiong M.S. 2018 Comparative Study on TIP/TIA/ZRP/TEOS Modified Epoxy Resin: Anti-Corrosion Performance
Xing Yingsheng Ph.D. 2011 Finite Element Analysis of Drop Deformation in the Entrance Region of a Cylindrical Tube
Xu Haijun Ph.D. 2004 Effect of Self Generated Thermal Field on Spatio Temporal Growth of Hierarchical Structures During Polymer Crystalization
Xu Jingli M.S. 2000 The Kinetics of Crystallization and Vulcanization Induced Phase Separation in Miscible Blends of Low Density Polyethylene and Ethylene Propylene Diene Terpolymer
Xu Lihua M.S. 2015 Layer-by-Layer Directed Self-Assembly of Polyelectrolyte Multilayers with Foaming Structures
Xu Rongcheng M.S. 2017 Anticorrosion UV Curable Alkyds
Xu Shengyi M.S. 2017 Computational Insight into Kinetic Control of Star Polymer Structure and Properties
XuTongM.S.2014UV-Curable Hybrid Polyurethanes
Xue Jiachen M.S. 2013 Control of Long Range Orientation in Ordered Mesoporous Carbon Thin Films
Yalcin Baris Ph.D. 2004 The Role of Clay Nanoparticles on the Development of Structural Hierarchy in Injection Molding of Nylon 6 and Uniaxial Stretching of Poly(vinyl chloride)
Yan Han Ph.D. 2011 Electrospinning-Derived Carbon/Graphite Nanofiber Mats from a Polyimide-Mesophase Pitch Blend Precursor for Flexible Thermal Management Thin Films
Yandek Greogory Ph.D. 2005 Experimental and Theoretical Investigations of Polymerization-Induced Phase Separation in Modified Epoxy Composite Materials and Photonic Crystals
Yang Chen M.S. 2017 Photomultiplication Effect in Organic and Quantum Dots Photodetector and Device Structural Modification
Yang Jen-Chang M.S. 1989 Miscibility Studies of Nafion Perflourinated Ionomer and Polyvinylidene Fluoride Blends
Yang Jen-Chang Ph.D. 1992 Miscibility and Phase Transformations in Rigid Rod Molecular Composities
Yang Jinhai Ph.D. 2008 Phase Morphology and Orientation Development of Polymer Blends in Melt Processing
Yang Junhong M.S. 2017 Glass Formation Behavior and Ionic Conductivity of Ionic Liquids and Polymeric Ionic Liquid: Insight from Molecular Simulation
Yang Kumin M.S. 1995 Effects of Shear Flow and Annealing on Morphology of Rapidly Precipitated Immiscible Polymer Blends
Yang Mo M.S. 2016 Synthesis and Characterization of Halatopolymers by Reversible Addition Fragmentation Chain Transfer (RAFT) Polymerization
Yang Muxuan M.S. 2021 Molecular Engineering of Polyaniline with Ultrathin Polydopamine and Monolayer Graphene for All-Solid-State Flexible Micro-Supercapacitors
YangShaoguangM.S.2014Design and Investigation of Polyurethane End-Capped Polyesters with Controlled Hydrolytic Stability
Yang Yiming M.S. 2016 Tough Stretchable Physically-crosslinked Hydrogel Fiber Mats from Electrospun Statistical Copolymers
Yang Yongrui M.S. 2020 Quasi-Solid-State Flexible Supercapacitors with Novel Gel Electrolytes
Yang Zhiyi Ph.D. 2007 Rheology of Miscible Polymer Blends with Hydrogen Bonding
Yao Yimin M.S. 2020 Polymeric Porous Aerogel Monoliths and Aerogel Microparticles Synthesized from Oil-in-Oil Emulsions
Ye Changhuai Ph.D. 2016 Microstructure Alignment and Mechanical Properties of Block Copolymer and Crystalline Polymer Thin Films
Ye Pin M.S. 1993 Adhesion of Crosslinked Polyethylene
Yi Chao M.S. 2013 Towards High Performance Polymer Solar Cells through Interfacial Engineering
Yi Chao Ph.D. 2016 Solution Processed Polymeric Thermoelectrics and Photovoltaics
Yoon Pil Joong Ph.D. 1999 Effect of Thermal History on the Rheology of Thermoplastic Polyurethanes
Yoon Yeo Cheol M.S. 1991 Structure Development in Rolled Poly(Vinylidene Fluoride) Sheets
Youn Yeo-O Ph.D. 2004 Structure-Morphology-Rheology Relationships in Thermopastic Polyurethanes
Yu Liqun M.S. 2000 Injection Welding
Yu Yishan Ph.D. 2000 Structure Development in Melt Processing Isotactic Polypropylene, Polypropylene Blends/Compounds and Dynamically Vulcanized Polyolefin TPES
Yuan Chuqing M.S. 2018 Topographic Pattern Directed Phase Separation in PAN/PMMA Blend Thin Films
YuanHongyiPh.D.2014Structures and Properties of Polymer Nanocomposite Sub-Micron Thin Films
Yucel Orcun Ph.D. 2013 Real Time Birefringence Gradient Development during Drying of Solution Cast Functional Films and their Mechanical, Optical and Gas Barrier Properties
Yue Peijing M.S. 2019 Electrochemical Characterization and Evaluation of Flexoelectric Performance of Polymer Electrolyte Composite
Yun Jushik Ph.D. 2003 Recycling of Waste Tires and EPDM Rubbers Using High Power Ultrasonic Devulcanization
Yun Seunghee Ph.D. 1994 Fiber-Matrix Adhesion in Single Fiber Model Composites
Zha Weibin Ph.D. 2006 Organoclay Nanocomposites Based on Vinylpyridine-Containing Block Copolymers
Zhai Chunhao M.S. 2016 Polyimide Aerogels and their Applications in Removal of Airborne Nanoparticles
Zhai Qingpu M.S. 1994 Air Lubricated Die for Rubber Extrusion
Zhan Chi M.S. 2018 Towards Development of Porous Polymeric Materials for Oil Absorption and Energy Storage Devices
Zhang Baosen M.S. 2019 Solution-Processed Broadbank Bulk Heterojunction Perovskite Photodetectors
Zhang Chao M.S. 2018 Thickness Limit for Alignment of Block Copolymer Films using Solvent Vapor Annealing with Shear
Zhang Cheng M.S. 2017 Pigmented Polyurethane/Polysiloxane Hybrid Coatings for Corrosion Protection
Zhang Chi M.S. 2015 Anti-Icing and Drop Impact Behavior on Lubricant Infused Polyelectrolyte Multilayer Surfaces
Zhang Chi Ph.D. 2019 Development of Functional Slippery Liquid Infused Surfaces with Enhanced Lifetime for Large Scale Productions
Zhang Huan M.S. 2014 Properties and Structures of Sulfonated Syndiotactic Polystyrene Aerogel and Syndiotactic Polystyrene/Silica Hybrid Aerogel
Zhang Huan Ph.D. 2018 Effects of Solution Composition (Salts, pH, Dielectric Constant) on Polyelectrolyte Complex (PEC) Formation and their Properties
Zhang Linkun M.S. 2015 Mechano-Optical Behaviors of Ionomers
Zhang Longhe Ph.D. 2014 Supramolecular Block Copolymers via Ionic Interactions
Zhang Mengxue M.S. 2019 Influence of Sodium Salts on the Swelling and Rheology of Hydrophobically Crosslinked, Non-Ionic Hydrogels Determined by QCM-D
Zhang Ren M.S. 2013 Dynamic Temperature Gradient Directed Self-assembly of Block Copolymer/Nanoparticle Thin Films
Zhang Ren Ph.D. 2016 Directed Self-organization of Polymer-grafted Nanoparticles in Polymer Thin Films
Zhang Wenjin M.S. 2000 Inverse Gas Chromatographic Studies of the Filler-Filler and Filler-Rubber Interactions
Zhang Xiao M.S. 2014 Novel Approaches for Nanocomposites Preparation and Characterization
Zhang Xiao Ph.D. 2018 Probing Polymer Dynamics using High Throughput Dielectric Spectroscopy
Zhang Xiuyuan M.S. 2019 Perovskite Solar Cells with Restricted Photocurrent Hysteresis by Ionic and Polymeric Additives
Zhang Xuan M.S. 2016 Polymer Films with Enhanced Through Thickness Optical Transmission and Compression Modulus with Electric Field Aligned Glass Fiber/Bubbles
Zhang Yuanzhong M.S. 2014 Relationship between Crosslinking and Ordering for the Fabrication of Soft Templated Mesoporous Carbon Thin Films
Zhang Yuanzhong Ph.D. 2018 Surface Interactions of Soft Interfacial Materials
Zhang Yue M.S. 2017 Phase Separation of Polymer-grafted Nanoparticle Blend Thin Films
Zhang Zeyang M.S. 2016 Interfacial Free Radical Polymerization of Maleic and 1,4-cyclohexanedimethyanol Divinyl Ether
Zhang Zhan M.S. 2015 Effect of Interfacial Reengineering and Molecular Structure on Polymer Solar Cells
Zhao Mengmeng Ph.D. 2019 Polyelectrolyte Complex Coacervation: Selective Solute Uptake, Tunable Rheological Properties and Applications
Zhao Shujing M.S. 2013 Core-shell Nanofiber Assemblies Containing Ionic Salts
Zhao Tianxin M.S. 2016 Silk Based Porous Microneedle Array for Programmable Drug Delivery
Zhao Wei Ph.D. 2011 Flexible Transparent Electrically Conductive Polymer Films for Future Electronics
ZhaoZhiyangM.S.2014Reactive Extrusion Synthesis of Ionomers
Zhao Zhiyang Ph.D. 2018 Ionomers and their Composites as Shape Memory Polymers in Films and 3D Printing
Zheng Luyao Ph.D. 2020 Solution-Processed Hybrid Perovskites for Photovoltaics and Thermoelectrics
Zheng Luyao M.S. 2017 High Efficient Inverted Perovskite Hybrid Solar Cells with Interfacial Engineering of Hole Transport Layer by A Radical Polymer and a Novel Cadmium Doped Perovskite Active Layer
Zheng Qiang M.S. 1990 Phase Transformations in Thermotropic Liquid Crystalline Copolyesters and Realted Polymer Blends
ZhengYimengM.S.2014Evaluation of Tung Oil Based Reactive Diluents for Alkyd Coating using Experimental Design
Zhong Jing Ph.D. 2016 Ultrasonically Aided Extrusion in Preparation of Polymer Composites with Carbon Fillers
Zhong Weijie M.S. 2015 The Effect of Hydrophilic Monomer in Core-shell Latex
Zhong Yingfan M.S. 2016 Layer-by-layer Rose Petal Mimic Surface for Oil/Water Separations
Zhou Jianguo Ph.D. 2007 Processing of Generic Circuits by Conductive Adhesives: Geometrical and Rheological Considerations
Zhou Lei M.S. 2019 Investigation of the Shape Memory Behaviour of Stearic Acid Swollen, Crosslinked EPDM Elastomers
Zhou Ming Ph.D. 2006 Synthesis, Characterization, Phase Behavior and Rheology of Combined Main-Chain/Side-Chain Liquid-Crystalline Polymers
Zhou Suyuan M.S. 2019 High Performance Perovskite Solar Cells by Interface Engineering and Bulk Heterojunction Device Structure
Zhou Xixian Ph.D. 1998 Processing-Structure-Property Relationships in Uni- and Biaxially Stretched Binary and Ternary Blends
Zhou Yi M.S. 2019 Phase Behavior of Oppositely Charged Strong Polyelectrolyte Pairs and Weak Polyelectrolyte Pairs, and Properties of Corresponding Complexes
Zhu Geyunjian M.S. 2018 Fabrication of Slippery Liquid-infused Porous Surfaces using Layer-by-Layer Assembly: Towards Multifunctional Surfaces and Facile Fabrication Processes
Zhu Guangchong M.S. 1994 Structure, Rheology and Mechanical Properties of Kaolin/Polyamide 6 In-Situ Composites and their Blends with Conventional Polyamides
Zhu Tao M.S. 2018 Room Temperature Operated Solution-Processed Near-Infrared Photodetectors
Zhuang Ping M.S. 1987 Fundamental Studies on Blends of a Thermotropic Aromatic Polyester Liquid Crystal with Thermoplastics
Zook Christopher Ph.D. 2000 Investigation into the Dynamic Behavior of an Injection Molding Non-Return Valve
Zou Matthews Kunrong M.S. 2004 Organic-Inorganic Hybrid Coatings Based on Cycloaliphatic Linseed Oil Epoxide
Zou Yu M.S. 2019 Use of Pyrolyzed Soybean Hulls as Eco-Friendly Reinforcement Filler in Styrene Butadiene Rubber
Zuo Yuchen M.S. 2018 Thermal Behaviors and NMR Investigations of Ionic Liquids under Different Degrees of Confinement